Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) Calculator

✖Positive Sequence Current consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.ⓘ Positive Sequence Current [I₁]			+10% -10%
✖Negative Sequence Impedance consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.ⓘ Negative Sequence Impedance [Z₂]			+10% -10%
✖Zero Sequence Impedance consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counter clockwise together.ⓘ Zero Sequence Impedance [Z₀]			+10% -10%
✖Fault Impedance is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.ⓘ Fault Impedance [Z_f]			+10% -10%

✖Zero Sequence Current consists of a balanced three-phase current, phasors of which all have the same phase angles and rotate counterclockwise together.ⓘ Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) [I₀]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fault Formula PDF PDF Image

Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Zero Sequence Current = -Positive Sequence Current*((Negative Sequence Impedance)/(Zero Sequence Impedance+Negative Sequence Impedance+3*Fault Impedance))
I₀ = -I₁*((Z₂)/(Z₀+Z₂+3*Z_f))
This formula uses 5 Variables

Variables Used

Zero Sequence Current - (Measured in Ampere) - Zero Sequence Current consists of a balanced three-phase current, phasors of which all have the same phase angles and rotate counterclockwise together.
Positive Sequence Current - (Measured in Ampere) - Positive Sequence Current consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation.
Negative Sequence Impedance - (Measured in Ohm) - Negative Sequence Impedance consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.
Zero Sequence Impedance - (Measured in Ohm) - Zero Sequence Impedance consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counter clockwise together.
Fault Impedance - (Measured in Ohm) - Fault Impedance is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.

STEP 1: Convert Input(s) to Base Unit

Positive Sequence Current: 2.001 Ampere --> 2.001 Ampere No Conversion Required
Negative Sequence Impedance: -44.6 Ohm --> -44.6 Ohm No Conversion Required
Zero Sequence Impedance: 8 Ohm --> 8 Ohm No Conversion Required
Fault Impedance: 1.5 Ohm --> 1.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I₀ = -I₁*((Z₂)/(Z₀+Z₂+3*Z_f)) --> -2.001*(((-44.6))/(8+(-44.6)+3*1.5))

Evaluating ... ...

I₀ = -2.78020560747664

STEP 3: Convert Result to Output's Unit

-2.78020560747664 Ampere --> No Conversion Required

FINAL ANSWER

-2.78020560747664 ≈ -2.780206 Ampere <-- Zero Sequence Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Fault » Shunt Faults » Unsymmetrical Faults » L L G Fault » Current » Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF)

Credits

Created by Nisarg

Indian Institute of Technology,Roorlee (IITR), Roorkee

Nisarg has created this Calculator and 100+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 500+ more calculators!

< Current Calculators

Fault Current using B-Phase Voltage (LLGF)

LaTeX Go Fault Current = B Phase Voltage/Fault Impedance

B-Phase Current (LLGF)

LaTeX Go B Phase Current = Fault Current-C Phase Current

C-Phase Current (LLGF)

LaTeX Go C Phase Current = Fault Current-B Phase Current

Fault Current (LLGF)

LaTeX Go Fault Current = B Phase Current+C Phase Current

Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) Formula

LaTeX Go

Zero Sequence Current = -Positive Sequence Current*((Negative Sequence Impedance)/(Zero Sequence Impedance+Negative Sequence Impedance+3*Fault Impedance))
I₀ = -I₁*((Z₂)/(Z₀+Z₂+3*Z_f))

What is a double line to ground fault?

A double line to ground fault is a type of fault that can occur in an electrical power system. It is characterized by two of the three conductors in a three-phase power system coming into contact with the ground or earth.

How to Calculate Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF)?

Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) calculator uses Zero Sequence Current = -Positive Sequence Current*((Negative Sequence Impedance)/(Zero Sequence Impedance+Negative Sequence Impedance+3*Fault Impedance)) to calculate the Zero Sequence Current, The Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) formula consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation. Zero Sequence Current is denoted by I₀ symbol.

How to calculate Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) using this online calculator? To use this online calculator for Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF), enter Positive Sequence Current (I₁), Negative Sequence Impedance (Z₂), Zero Sequence Impedance (Z₀) & Fault Impedance (Z_f) and hit the calculate button. Here is how the Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) calculation can be explained with given input values -> -1.562953 = -2.001*(((-44.6))/(8+(-44.6)+3*1.5)).

FAQ

What is Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF)?

The Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) formula consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation and is represented as I₀ = -I₁*((Z₂)/(Z₀+Z₂+3*Z_f)) or Zero Sequence Current = -Positive Sequence Current*((Negative Sequence Impedance)/(Zero Sequence Impedance+Negative Sequence Impedance+3*Fault Impedance)). Positive Sequence Current consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart rotating counterclockwise in ABC rotation, Negative Sequence Impedance consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation, Zero Sequence Impedance consists of a balanced three-phase voltage and current, phasors of which all have the same phase angles and rotate counter clockwise together & Fault Impedance is a measure of the resistance and reactance in an electrical circuit that is used to calculate the fault current that flows through the circuit in the event of a fault.

How to calculate Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF)?

The Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF) formula consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation is calculated using Zero Sequence Current = -Positive Sequence Current*((Negative Sequence Impedance)/(Zero Sequence Impedance+Negative Sequence Impedance+3*Fault Impedance)). To calculate Zero Sequence Current using Positive Sequence Current and Sequence Impedances(LLGF), you need Positive Sequence Current (I₁), Negative Sequence Impedance (Z₂), Zero Sequence Impedance (Z₀) & Fault Impedance (Z_f). With our tool, you need to enter the respective value for Positive Sequence Current, Negative Sequence Impedance, Zero Sequence Impedance & Fault Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Zero Sequence Current?

In this formula, Zero Sequence Current uses Positive Sequence Current, Negative Sequence Impedance, Zero Sequence Impedance & Fault Impedance. We can use 3 other way(s) to calculate the same, which is/are as follows -

Zero Sequence Current = B Phase Voltage/(3*Fault Impedance)
Zero Sequence Current = C Phase Voltage/(3*Fault Impedance)
Zero Sequence Current = (-1)*Zero Sequence Voltage/Zero Sequence Impedance

Home

FREE PDFs

🔍 Search