LCM of two numbers

Z11 Parameter in Terms of G Parameters Calculator

✖G11 Parameter is input admittance.ⓘ G11 Parameter [g₁₁]

+10%

-10%

✖Z11 Parameter is driving point impedance at port 1.ⓘ Z11 Parameter in Terms of G Parameters [Z₁₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Two Port Network Formula PDF PDF Image

Z11 Parameter in Terms of G Parameters Solution

STEP 0: Pre-Calculation Summary

Formula Used

Z11 Parameter = 1/G11 Parameter
Z₁₁ = 1/g₁₁
This formula uses 2 Variables

Variables Used

Z11 Parameter - (Measured in Ohm) - Z11 Parameter is driving point impedance at port 1.
G11 Parameter - (Measured in Siemens) - G11 Parameter is input admittance.

STEP 1: Convert Input(s) to Base Unit

G11 Parameter: 0.002 Mho --> 0.002 Siemens (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Z₁₁ = 1/g₁₁ --> 1/0.002

Evaluating ... ...

Z₁₁ = 500

STEP 3: Convert Result to Output's Unit

500 Ohm --> No Conversion Required

FINAL ANSWER

500 Ohm <-- Z11 Parameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two Port Network » Z Parameters » Z11 Parameter in Terms of G Parameters

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Z Parameters Calculators

Current 2 given Voltage 2 (Z Parameter)

LaTeX Go Current in Port 2 = (Voltage Port 2-(Z21 Parameter*Current in Port 1))/Z22 Parameter

Current 2 given Voltage 1 (Z Parameter)

LaTeX Go Current in Port 2 = (Voltage Port 1-(Z11 Parameter*Current in Port 1))/Z12 Parameter

Voltage 1 (Z Parameter)

LaTeX Go Voltage Port 1 = (Z11 Parameter*Current in Port 1)+(Z12 Parameter+Current in Port 2)

Voltage 2 (Z Parameter)

LaTeX Go Voltage Port 2 = (Z21 Parameter*Current in Port 1)+(Z22 Parameter+Current in Port 2)

Z11 Parameter in Terms of G Parameters Formula

LaTeX Go

Z11 Parameter = 1/G11 Parameter
Z₁₁ = 1/g₁₁

Define two-port network.

A two-port network has four variables with two of them being independent. If one of the ports is terminated by a load with no independent sources, then the load enforces a relationship between the voltage and current of that port. A degree of freedom is lost. The circuit now has only one independent parameter.

How to Calculate Z11 Parameter in Terms of G Parameters?

Z11 Parameter in Terms of G Parameters calculator uses Z11 Parameter = 1/G11 Parameter to calculate the Z11 Parameter, The Z11 Parameter in Terms of G Parameters formula is defined as driving point impedance at port 1. and also known as impedance parameters or open-circuit parameters. Z11 Parameter is denoted by Z₁₁ symbol.

How to calculate Z11 Parameter in Terms of G Parameters using this online calculator? To use this online calculator for Z11 Parameter in Terms of G Parameters, enter G11 Parameter (g₁₁) and hit the calculate button. Here is how the Z11 Parameter in Terms of G Parameters calculation can be explained with given input values -> 500 = 1/0.002.

FAQ

What is Z11 Parameter in Terms of G Parameters?

The Z11 Parameter in Terms of G Parameters formula is defined as driving point impedance at port 1. and also known as impedance parameters or open-circuit parameters and is represented as Z₁₁ = 1/g₁₁ or Z11 Parameter = 1/G11 Parameter. G11 Parameter is input admittance.

How to calculate Z11 Parameter in Terms of G Parameters?

The Z11 Parameter in Terms of G Parameters formula is defined as driving point impedance at port 1. and also known as impedance parameters or open-circuit parameters is calculated using Z11 Parameter = 1/G11 Parameter. To calculate Z11 Parameter in Terms of G Parameters, you need G11 Parameter (g₁₁). With our tool, you need to enter the respective value for G11 Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Z11 Parameter?

In this formula, Z11 Parameter uses G11 Parameter. We can use 3 other way(s) to calculate the same, which is/are as follows -

Z11 Parameter = (Voltage Port 1-(Z12 Parameter*Current in Port 2))/Current in Port 1
Z11 Parameter = Voltage Port 1/Current in Port 1
Z11 Parameter = Y22 Parameter/Delta-Y

Home

FREE PDFs

🔍 Search