Young's Modulus given Deflection due to Prestressing for Parabolic Tendon Calculator

✖Upward Thrust for parabolic tendon can be described as the force per unit length of the tendon.ⓘ Upward Thrust [W_up]			+10% -10%
✖Span Length is the end to end distance between any beam or slab.ⓘ Span Length [L]			+10% -10%
✖The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation).ⓘ Deflection due to Moments on Arch Dam [δ]			+10% -10%
✖Second Moment of Area is a measure of the 'efficiency' of a shape to resist bending caused by loading. The second moment of area is a measure of a shape's resistance to change.ⓘ Second Moment of Area [I_A]			+10% -10%

✖Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.ⓘ Young's Modulus given Deflection due to Prestressing for Parabolic Tendon [E]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Crack Width and Deflection of Prestress Concrete Members Formulas PDF PDF Image

Young's Modulus given Deflection due to Prestressing for Parabolic Tendon Solution

STEP 0: Pre-Calculation Summary

Formula Used

Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area))
E = (5/384)*((W_up*L^4)/(δ*I_A))
This formula uses 5 Variables

Variables Used

Young's Modulus - (Measured in Pascal) - Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
Upward Thrust - (Measured in Newton per Meter) - Upward Thrust for parabolic tendon can be described as the force per unit length of the tendon.
Span Length - (Measured in Meter) - Span Length is the end to end distance between any beam or slab.
Deflection due to Moments on Arch Dam - (Measured in Meter) - The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation).
Second Moment of Area - (Measured in Meter⁴) - Second Moment of Area is a measure of the 'efficiency' of a shape to resist bending caused by loading. The second moment of area is a measure of a shape's resistance to change.

STEP 1: Convert Input(s) to Base Unit

Upward Thrust: 0.842 Kilonewton per Meter --> 842 Newton per Meter (Check conversion here)
Span Length: 5 Meter --> 5 Meter No Conversion Required
Deflection due to Moments on Arch Dam: 48.1 Meter --> 48.1 Meter No Conversion Required
Second Moment of Area: 9.5 Meter⁴ --> 9.5 Meter⁴ No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E = (5/384)*((W_up*L^4)/(δ*I_A)) --> (5/384)*((842*5^4)/(48.1*9.5))

Evaluating ... ...

E = 14.9955433672539

STEP 3: Convert Result to Output's Unit

14.9955433672539 Pascal --> No Conversion Required

FINAL ANSWER

14.9955433672539 ≈ 14.99554 Pascal <-- Young's Modulus

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Prestressed Concrete » Crack Width and Deflection of Prestress Concrete Members » Deflection » Deflection due to Prestressing Force » Young's Modulus given Deflection due to Prestressing for Parabolic Tendon

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Deflection due to Prestressing Force Calculators

Young's Modulus given Deflection due to Prestressing for Parabolic Tendon

LaTeX Go Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area))

Deflection due to Prestressing for Parabolic Tendon

LaTeX Go Deflection due to Moments on Arch Dam = (5/384)*((Upward Thrust*Span Length^4)/(Young's Modulus*Second Moment of Area))

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon

LaTeX Go Upward Thrust = (Deflection due to Moments on Arch Dam*384*Young's Modulus*Second Moment of Area)/(5*Span Length^4)

Flexural Rigidity given Deflection due to Prestressing for Parabolic Tendon

LaTeX Go Flexural Rigidity = (5/384)*((Upward Thrust*Span Length^4)/Deflection due to Moments on Arch Dam)

Young's Modulus given Deflection due to Prestressing for Parabolic Tendon Formula

LaTeX Go

Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area))
E = (5/384)*((W_up*L^4)/(δ*I_A))

What is meant by Flexural Rigidity?

Flexural rigidity is defined as the force couple required to bend a fixed non-rigid structure by one unit of curvature.

How to Calculate Young's Modulus given Deflection due to Prestressing for Parabolic Tendon?

Young's Modulus given Deflection due to Prestressing for Parabolic Tendon calculator uses Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area)) to calculate the Young's Modulus, The Young's Modulus given Deflection Due to Prestressing for Parabolic Tendon is defined as the relationship between stress (force per unit area) and strain (proportional deformation in object. Young's Modulus is denoted by E symbol.

How to calculate Young's Modulus given Deflection due to Prestressing for Parabolic Tendon using this online calculator? To use this online calculator for Young's Modulus given Deflection due to Prestressing for Parabolic Tendon, enter Upward Thrust (W_up), Span Length (L), Deflection due to Moments on Arch Dam (δ) & Second Moment of Area (I_A) and hit the calculate button. Here is how the Young's Modulus given Deflection due to Prestressing for Parabolic Tendon calculation can be explained with given input values -> 14.99554 = (5/384)*((842*5^4)/(48.1*9.5)).

FAQ

What is Young's Modulus given Deflection due to Prestressing for Parabolic Tendon?

The Young's Modulus given Deflection Due to Prestressing for Parabolic Tendon is defined as the relationship between stress (force per unit area) and strain (proportional deformation in object and is represented as E = (5/384)*((W_up*L^4)/(δ*I_A)) or Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area)). Upward Thrust for parabolic tendon can be described as the force per unit length of the tendon, Span Length is the end to end distance between any beam or slab, The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation) & Second Moment of Area is a measure of the 'efficiency' of a shape to resist bending caused by loading. The second moment of area is a measure of a shape's resistance to change.

How to calculate Young's Modulus given Deflection due to Prestressing for Parabolic Tendon?

The Young's Modulus given Deflection Due to Prestressing for Parabolic Tendon is defined as the relationship between stress (force per unit area) and strain (proportional deformation in object is calculated using Young's Modulus = (5/384)*((Upward Thrust*Span Length^4)/(Deflection due to Moments on Arch Dam*Second Moment of Area)). To calculate Young's Modulus given Deflection due to Prestressing for Parabolic Tendon, you need Upward Thrust (W_up), Span Length (L), Deflection due to Moments on Arch Dam (δ) & Second Moment of Area (I_A). With our tool, you need to enter the respective value for Upward Thrust, Span Length, Deflection due to Moments on Arch Dam & Second Moment of Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Young's Modulus?

In this formula, Young's Modulus uses Upward Thrust, Span Length, Deflection due to Moments on Arch Dam & Second Moment of Area. We can use 2 other way(s) to calculate the same, which is/are as follows -

Young's Modulus = (Thrust Force*Span Length^3)/(48*Deflection due to Moments on Arch Dam*Moment of Inertia in Prestress)
Young's Modulus = (Part of Span Length*(3-4*Part of Span Length^2)*Thrust Force*Span Length^3)/(48*Deflection due to Moments on Arch Dam*Moment of Inertia in Prestress)

Home

FREE PDFs

🔍 Search