Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension Calculator

✖Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Force in Bolt [P_tb]			+10% -10%
✖Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load.ⓘ Factor of Safety of Bolted Joint [f_s]			+10% -10%
✖Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.ⓘ Core Diameter of Bolt [d_c]			+10% -10%

✖Tensile Yield Strength of Bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension [S_yt]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Joint Analysis Formulas PDF PDF Image

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2)
S_yt = 4*P_tb*f_s/(pi*d_c^2)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Tensile Yield Strength of Bolt - (Measured in Pascal) - Tensile Yield Strength of Bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Tensile Force in Bolt - (Measured in Newton) - Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen.
Factor of Safety of Bolted Joint - Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load.
Core Diameter of Bolt - (Measured in Meter) - Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

STEP 1: Convert Input(s) to Base Unit

Tensile Force in Bolt: 9990 Newton --> 9990 Newton No Conversion Required
Factor of Safety of Bolted Joint: 3 --> No Conversion Required
Core Diameter of Bolt: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_yt = 4*P_tb*f_s/(pi*d_c^2) --> 4*9990*3/(pi*0.012^2)

Evaluating ... ...

S_yt = 264992980.248006

STEP 3: Convert Result to Output's Unit

264992980.248006 Pascal -->264.992980248006 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

264.992980248006 ≈ 264.993 Newton per Square Millimeter <-- Tensile Yield Strength of Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Threaded Bolted Joints » Mechanical » Joint Analysis » Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Joint Analysis Calculators

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Shear

LaTeX Go Tensile Yield Strength of Bolt = (2*Tensile Force in Bolt*Factor of Safety of Bolted Joint)/(pi*Core Diameter of Bolt*Height of Nut)

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear

LaTeX Go Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut)

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension

LaTeX Go Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2)

Maximum Tensile Stress in Bolt

LaTeX Go Maximum Tensile Stress in Bolt = Tensile Force in Bolt/(pi/4*Core Diameter of Bolt^2)

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension Formula

LaTeX Go

Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2)
S_yt = 4*P_tb*f_s/(pi*d_c^2)

Define Tensile Strength

Tensile strength, maximum load that a material can support without fracture when being stretched, divided by the original cross-sectional area of the material. Tensile strengths have dimensions of force per unit area and in the English system of measurement are commonly expressed in units of pounds per square inch, often abbreviated to psi.

How to Calculate Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension?

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension calculator uses Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2) to calculate the Tensile Yield Strength of Bolt, Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions. Tensile Yield Strength of Bolt is denoted by S_yt symbol.

How to calculate Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension using this online calculator? To use this online calculator for Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension, enter Tensile Force in Bolt (P_tb), Factor of Safety of Bolted Joint (f_s) & Core Diameter of Bolt (d_c) and hit the calculate button. Here is how the Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension calculation can be explained with given input values -> 0.000265 = 4*9990*3/(pi*0.012^2).

FAQ

What is Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension?

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions and is represented as S_yt = 4*P_tb*f_s/(pi*d_c^2) or Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2). Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen, Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load & Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.

How to calculate Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension?

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions is calculated using Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2). To calculate Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension, you need Tensile Force in Bolt (P_tb), Factor of Safety of Bolted Joint (f_s) & Core Diameter of Bolt (d_c). With our tool, you need to enter the respective value for Tensile Force in Bolt, Factor of Safety of Bolted Joint & Core Diameter of Bolt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Yield Strength of Bolt?

In this formula, Tensile Yield Strength of Bolt uses Tensile Force in Bolt, Factor of Safety of Bolted Joint & Core Diameter of Bolt. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Yield Strength of Bolt = (2*Tensile Force in Bolt*Factor of Safety of Bolted Joint)/(pi*Core Diameter of Bolt*Height of Nut)

Home

FREE PDFs

🔍 Search