Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear Calculator

✖Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Force in Bolt [P_tb]			+10% -10%
✖Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load.ⓘ Factor of Safety of Bolted Joint [f_s]			+10% -10%
✖Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.ⓘ Core Diameter of Bolt [d_c]			+10% -10%
✖Height of Nut is defined as the height of the nut that is used in fitting to the bolt.ⓘ Height of Nut [h]			+10% -10%

✖Shear Yield Strength of Bolt is the strength of the bolt against the type of yield or structural failure when the material or component fails in shear.ⓘ Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear [S_sy]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Joint Analysis Formulas PDF PDF Image

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut)
S_sy = P_tb*f_s/(pi*d_c*h)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Shear Yield Strength of Bolt - (Measured in Pascal) - Shear Yield Strength of Bolt is the strength of the bolt against the type of yield or structural failure when the material or component fails in shear.
Tensile Force in Bolt - (Measured in Newton) - Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen.
Factor of Safety of Bolted Joint - Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load.
Core Diameter of Bolt - (Measured in Meter) - Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread.
Height of Nut - (Measured in Meter) - Height of Nut is defined as the height of the nut that is used in fitting to the bolt.

STEP 1: Convert Input(s) to Base Unit

Tensile Force in Bolt: 9990 Newton --> 9990 Newton No Conversion Required
Factor of Safety of Bolted Joint: 3 --> No Conversion Required
Core Diameter of Bolt: 12 Millimeter --> 0.012 Meter (Check conversion here)
Height of Nut: 6 Millimeter --> 0.006 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_sy = P_tb*f_s/(pi*d_c*h) --> 9990*3/(pi*0.012*0.006)

Evaluating ... ...

S_sy = 132496490.124003

STEP 3: Convert Result to Output's Unit

132496490.124003 Pascal -->132.496490124003 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

132.496490124003 ≈ 132.4965 Newton per Square Millimeter <-- Shear Yield Strength of Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Threaded Bolted Joints » Mechanical » Joint Analysis » Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Joint Analysis Calculators

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Shear

LaTeX Go Tensile Yield Strength of Bolt = (2*Tensile Force in Bolt*Factor of Safety of Bolted Joint)/(pi*Core Diameter of Bolt*Height of Nut)

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear

LaTeX Go Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut)

Yield Strength of Bolt in Tension given Tensile Force on Bolt in Tension

LaTeX Go Tensile Yield Strength of Bolt = 4*Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt^2)

Maximum Tensile Stress in Bolt

LaTeX Go Maximum Tensile Stress in Bolt = Tensile Force in Bolt/(pi/4*Core Diameter of Bolt^2)

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear Formula

LaTeX Go

Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut)
S_sy = P_tb*f_s/(pi*d_c*h)

Define Shear Strength

Shear strength is defined as the maximum load that can be supported prior to fracture, when applied at a right angle to the fastener's axis. A load occurring in one transverse plane is known as single shear.

How to Calculate Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear?

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear calculator uses Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut) to calculate the Shear Yield Strength of Bolt, Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions. Shear Yield Strength of Bolt is denoted by S_sy symbol.

How to calculate Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear using this online calculator? To use this online calculator for Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear, enter Tensile Force in Bolt (P_tb), Factor of Safety of Bolted Joint (f_s), Core Diameter of Bolt (d_c) & Height of Nut (h) and hit the calculate button. Here is how the Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear calculation can be explained with given input values -> 0.000132 = 9990*3/(pi*0.012*0.006).

FAQ

What is Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear?

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions and is represented as S_sy = P_tb*f_s/(pi*d_c*h) or Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut). Tensile Force in Bolt is the stretching force acting on the bolt and generally results in tensile stress and tensile strain in the specimen, Factor of Safety of Bolted Joint expresses how much stronger a bolted joint system is than it needs to be for an intended load, Core Diameter of Bolt is defined as the smallest diameter of the thread of the bolt. The term “minor diameter” replaces the term “core diameter” as applied to the thread & Height of Nut is defined as the height of the nut that is used in fitting to the bolt.

How to calculate Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear?

Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear formula is defined as the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions is calculated using Shear Yield Strength of Bolt = Tensile Force in Bolt*Factor of Safety of Bolted Joint/(pi*Core Diameter of Bolt*Height of Nut). To calculate Yield Strength of Bolt in Shear given Tensile Force on Bolt in Shear, you need Tensile Force in Bolt (P_tb), Factor of Safety of Bolted Joint (f_s), Core Diameter of Bolt (d_c) & Height of Nut (h). With our tool, you need to enter the respective value for Tensile Force in Bolt, Factor of Safety of Bolted Joint, Core Diameter of Bolt & Height of Nut and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search