Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station Calculator

✖Observed Flow Volume is the recorded the quantity of water that would have flowed in a river past a particular point in a particular period.ⓘ Observed Flow Volume [R_o]			+10% -10%
✖Abstraction in Time in time for irrigation, water supply and industrial use and inclusive of evaporation losses in surface water bodies on the stream.ⓘ Abstraction in Time [A_b]			+10% -10%
✖Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing.ⓘ Change in Storage Volumes [ΔSv]			+10% -10%

✖Yield of Catchment at a time period by influenced by water balance equation.ⓘ Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station [Y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Watershed and Yield Formulas PDF PDF Image

Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station Solution

STEP 0: Pre-Calculation Summary

Formula Used

Yield of Catchment = Observed Flow Volume+Abstraction in Time+Change in Storage Volumes
Y = R_o+A_b+ΔSv
This formula uses 4 Variables

Variables Used

Yield of Catchment - Yield of Catchment at a time period by influenced by water balance equation.
Observed Flow Volume - (Measured in Cubic Meter per Second) - Observed Flow Volume is the recorded the quantity of water that would have flowed in a river past a particular point in a particular period.
Abstraction in Time - Abstraction in Time in time for irrigation, water supply and industrial use and inclusive of evaporation losses in surface water bodies on the stream.
Change in Storage Volumes - Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing.

STEP 1: Convert Input(s) to Base Unit

Observed Flow Volume: 50 Cubic Meter per Second --> 50 Cubic Meter per Second No Conversion Required
Abstraction in Time: 115 --> No Conversion Required
Change in Storage Volumes: 20 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y = R_o+A_b+ΔSv --> 50+115+20

Evaluating ... ...

Y = 185

STEP 3: Convert Result to Output's Unit

185 --> No Conversion Required

FINAL ANSWER

185 <-- Yield of Catchment

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Runoff » Runoff Volume » Watershed and Yield » Yield of Catchment » Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Yield of Catchment Calculators

Observed Runoff Volume at Terminal Gauging Station given Yield of Catchment

LaTeX Go Observed Flow Volume = Yield of Catchment-Abstraction in Time-Change in Storage Volumes

Volume of Return Flow given Yield of Catchment

LaTeX Go Volume of Return Flow = Yield of Catchment-Natural Flow Volume

Yield of Catchment by Water Balance Equation

LaTeX Go Yield of Catchment = Natural Flow Volume+Volume of Return Flow

Natural Flow given Yield of Catchment

LaTeX Go Natural Flow Volume = Yield of Catchment-Volume of Return Flow

Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station Formula

LaTeX Go

Yield of Catchment = Observed Flow Volume+Abstraction in Time+Change in Storage Volumes
Y = R_o+A_b+ΔSv

What is Water Budget Analysis?

Water Budget Analysis reveals the percentages of precipitation made up by surface flow, evapotranspiration, groundwater recharge and the change of soil storage, all of which are considered useful to the further understanding of the hydrological processes.

What is a Catchment and Catchment Yield?

Catchments are areas of land where runoff collects in a specific zone. This movement is caused by water moving from areas of high energy to low energy due to the influence of gravity.
The Yield Coefficient or the proportion of rainfall that runs off. Only a relatively small proportion of the rainfall received in the catchment area runs off into watercourses or to fill dams. This is then multiplied by the catchment area and the average annual rainfall to determine the Catchment Yield.

How to Calculate Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station?

Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station calculator uses Yield of Catchment = Observed Flow Volume+Abstraction in Time+Change in Storage Volumes to calculate the Yield of Catchment, The Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station formula is defined as the output which the water resource system could sustain under specified design runoff criteria. Yield of Catchment is denoted by Y symbol.

How to calculate Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station using this online calculator? To use this online calculator for Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station, enter Observed Flow Volume (R_o), Abstraction in Time (A_b) & Change in Storage Volumes (ΔSv) and hit the calculate button. Here is how the Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station calculation can be explained with given input values -> 185 = 50+115+20.

FAQ

What is Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station?

The Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station formula is defined as the output which the water resource system could sustain under specified design runoff criteria and is represented as Y = R_o+A_b+ΔSv or Yield of Catchment = Observed Flow Volume+Abstraction in Time+Change in Storage Volumes. Observed Flow Volume is the recorded the quantity of water that would have flowed in a river past a particular point in a particular period, Abstraction in Time in time for irrigation, water supply and industrial use and inclusive of evaporation losses in surface water bodies on the stream & Change in Storage Volumes of water storage bodies on the stream is the difference of water incoming and outgoing.

How to calculate Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station?

The Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station formula is defined as the output which the water resource system could sustain under specified design runoff criteria is calculated using Yield of Catchment = Observed Flow Volume+Abstraction in Time+Change in Storage Volumes. To calculate Yield of Catchment given Observed Runoff Volume at Terminal Gauging Station, you need Observed Flow Volume (R_o), Abstraction in Time (A_b) & Change in Storage Volumes (ΔSv). With our tool, you need to enter the respective value for Observed Flow Volume, Abstraction in Time & Change in Storage Volumes and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Yield of Catchment?

In this formula, Yield of Catchment uses Observed Flow Volume, Abstraction in Time & Change in Storage Volumes. We can use 1 other way(s) to calculate the same, which is/are as follows -

Yield of Catchment = Natural Flow Volume+Volume of Return Flow

Home

FREE PDFs

🔍 Search