Y12 Parameter in Terms of Z Parameters Calculator

✖Z12 Parameter is reverse transfer impedance.ⓘ Z12 Parameter [Z₁₂]			+10% -10%
✖Delta-Z is defined as the delta impedance of Z.ⓘ Delta-Z [Δz]			+10% -10%

✖Y12 Parameter is reverse transfer Admittance.ⓘ Y12 Parameter in Terms of Z Parameters [Y₁₂]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Two Port Network Formula PDF PDF Image

Y12 Parameter in Terms of Z Parameters Solution

STEP 0: Pre-Calculation Summary

Formula Used

Y12 Parameter = (-1)*Z12 Parameter/Delta-Z
Y₁₂ = (-1)*Z₁₂/Δz
This formula uses 3 Variables

Variables Used

Y12 Parameter - (Measured in Siemens) - Y12 Parameter is reverse transfer Admittance.
Z12 Parameter - (Measured in Ohm) - Z12 Parameter is reverse transfer impedance.
Delta-Z - Delta-Z is defined as the delta impedance of Z.

STEP 1: Convert Input(s) to Base Unit

Z12 Parameter: 2.9 Ohm --> 2.9 Ohm No Conversion Required
Delta-Z: 5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y₁₂ = (-1)*Z₁₂/Δz --> (-1)*2.9/5

Evaluating ... ...

Y₁₂ = -0.58

STEP 3: Convert Result to Output's Unit

-0.58 Siemens -->-0.58 Mho (Check conversion here)

FINAL ANSWER

-0.58 Mho <-- Y12 Parameter

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Two Port Network » Y Parameters » Y12 Parameter in Terms of Z Parameters

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Y Parameters Calculators

Driving Point Output Admittance (Y22)

LaTeX Go Y22 Parameter = Current in Port 2/Voltage Port 2

Driving Point Input Admittance (Y11)

LaTeX Go Y11 Parameter = Current in Port 1/Voltage Port 1

Output Transfer Admittance (Y21)

LaTeX Go Y21 Parameter = Current in Port 2/Voltage Port 1

Input Transfer Admittance (Y12)

LaTeX Go Y12 Parameter = Current in Port 1/Voltage Port 2

Y12 Parameter in Terms of Z Parameters Formula

LaTeX Go

Y12 Parameter = (-1)*Z12 Parameter/Delta-Z
Y₁₂ = (-1)*Z₁₂/Δz

Define two-port network.

A two-port network has four variables with two of them being independent. If one of the ports is terminated by a load with no independent sources, then the load enforces a relationship between the voltage and current of that port. A degree of freedom is lost. The circuit now has only one independent parameter.

How to Calculate Y12 Parameter in Terms of Z Parameters?

Y12 Parameter in Terms of Z Parameters calculator uses Y12 Parameter = (-1)*Z12 Parameter/Delta-Z to calculate the Y12 Parameter, The Y12 Parameter in Terms of Z Parameters formula is defined as reverse transfer Admittance of the short circuit admittance parameters. Y12 Parameter is denoted by Y₁₂ symbol.

How to calculate Y12 Parameter in Terms of Z Parameters using this online calculator? To use this online calculator for Y12 Parameter in Terms of Z Parameters, enter Z12 Parameter (Z₁₂) & Delta-Z (Δz) and hit the calculate button. Here is how the Y12 Parameter in Terms of Z Parameters calculation can be explained with given input values -> -0.58 = (-1)*2.9/5.

FAQ

What is Y12 Parameter in Terms of Z Parameters?

The Y12 Parameter in Terms of Z Parameters formula is defined as reverse transfer Admittance of the short circuit admittance parameters and is represented as Y₁₂ = (-1)*Z₁₂/Δz or Y12 Parameter = (-1)*Z12 Parameter/Delta-Z. Z12 Parameter is reverse transfer impedance & Delta-Z is defined as the delta impedance of Z.

How to calculate Y12 Parameter in Terms of Z Parameters?

The Y12 Parameter in Terms of Z Parameters formula is defined as reverse transfer Admittance of the short circuit admittance parameters is calculated using Y12 Parameter = (-1)*Z12 Parameter/Delta-Z. To calculate Y12 Parameter in Terms of Z Parameters, you need Z12 Parameter (Z₁₂) & Delta-Z (Δz). With our tool, you need to enter the respective value for Z12 Parameter & Delta-Z and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Y12 Parameter?

In this formula, Y12 Parameter uses Z12 Parameter & Delta-Z. We can use 2 other way(s) to calculate the same, which is/are as follows -

Y12 Parameter = Current in Port 1/Voltage Port 2
Y12 Parameter = -H12 Parameter/H11 Parameter

Home

FREE PDFs

🔍 Search