Workpiece surface speed from Lindsay's semiempirical analysis Calculator

✖Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed.ⓘ Equivalent Wheel Diameter [d_e]			+10% -10%
✖The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material.ⓘ Percentage Volume of Bond Material in Grinding [V_b]			+10% -10%
✖Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation.ⓘ Grain Diameter of The Grinding wheel [d_g]			+10% -10%
✖The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is).ⓘ Rockwell Hardness Number [N_hardness]			+10% -10%
✖The Wheel Removal Parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.ⓘ Wheel Removal Parameter [Λ_t]			+10% -10%
✖Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding.ⓘ Surface Speed of Wheel [v_t]			+10% -10%
✖Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece.ⓘ Depth of Dress [a_d]			+10% -10%
✖The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle.ⓘ Feed [f]			+10% -10%

✖Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.ⓘ Workpiece surface speed from Lindsay's semiempirical analysis [v_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Workpiece surface speed from Lindsay's semiempirical analysis Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Speed of Workpiece = ((Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42*Wheel Removal Parameter)/(7.93*100000*(1/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel))^(1000/158)
v_w = ((d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42*Λ_t)/(7.93*100000*(1/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t))^(1000/158)
This formula uses 9 Variables

Variables Used

Surface Speed of Workpiece - (Measured in Meter per Second) - Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.
Equivalent Wheel Diameter - (Measured in Meter) - Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed.
Percentage Volume of Bond Material in Grinding - The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material.
Grain Diameter of The Grinding wheel - (Measured in Meter) - Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation.
Rockwell Hardness Number - The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is).
Wheel Removal Parameter - The Wheel Removal Parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.
Surface Speed of Wheel - (Measured in Meter per Second) - Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding.
Depth of Dress - (Measured in Meter) - Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece.
Feed - (Measured in Meter) - The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle.

STEP 1: Convert Input(s) to Base Unit

Equivalent Wheel Diameter: 40 Millimeter --> 0.04 Meter (Check conversion here)
Percentage Volume of Bond Material in Grinding: 16 --> No Conversion Required
Grain Diameter of The Grinding wheel: 7 Millimeter --> 0.007 Meter (Check conversion here)
Rockwell Hardness Number: 20 --> No Conversion Required
Wheel Removal Parameter: 2.4 --> No Conversion Required
Surface Speed of Wheel: 4.8 Millimeter per Second --> 0.0048 Meter per Second (Check conversion here)
Depth of Dress: 0.657680918744346 Millimeter --> 0.000657680918744346 Meter (Check conversion here)
Feed: 0.9 Millimeter --> 0.0009 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_w = ((d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42*Λ_t)/(7.93*100000*(1/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t))^(1000/158) --> ((0.04^0.14*16^0.47*0.007^0.13*20^1.42*2.4)/(7.93*100000*(1/0.0048)^0.158*(1+(4*0.000657680918744346/(3*0.0009)))*0.0009^0.58*0.0048))^(1000/158)

Evaluating ... ...

v_w = 0.1

STEP 3: Convert Result to Output's Unit

0.1 Meter per Second -->100 Millimeter per Second (Check conversion here)

FINAL ANSWER

100 Millimeter per Second <-- Surface Speed of Workpiece

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Lindsay Semiempirical Analysis » Workpiece surface speed from Lindsay's semiempirical analysis

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Lindsay Semiempirical Analysis Calculators

Equivalent wheel diameter from Lindsay's semiempirical analysis

LaTeX Go Equivalent Wheel Diameter = ((7.93*100000*((Surface Speed of Workpiece/Surface Speed of Wheel)^0.158)*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Wheel Removal Parameter*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42))^(100/14)

Percentage Volume of Bond material from Lindsay's semiempirical analysis

LaTeX Go Percentage Volume of Bond Material in Grinding = ((7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Wheel Removal Parameter*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42))^(100/47)

Grain diameter from Lindsay's semiempirical analysis

LaTeX Go Grain Diameter of The Grinding wheel = ((7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Wheel Removal Parameter*Rockwell Hardness Number^1.42))^(100/13)

Wheel removal parameter from Lindsay's semiempirical analysis

LaTeX Go Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42)

Workpiece surface speed from Lindsay's semiempirical analysis Formula

LaTeX Go

Why dressing of wheel is necessary for grinding?

The objective of dressing the wheel is to: True the wheel by knocking abrasive particles from the wheel's surface and making the wheel concentric. This minimizes vibration and improves surface finish, eliminating the vibration of the out-of-balance wheel across the workpiece's surface.

How to Calculate Workpiece surface speed from Lindsay's semiempirical analysis?

Workpiece surface speed from Lindsay's semiempirical analysis calculator uses Surface Speed of Workpiece = ((Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42*Wheel Removal Parameter)/(7.93*100000*(1/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel))^(1000/158) to calculate the Surface Speed of Workpiece, Workpiece surface speed from Lindsay's semiempirical analysis is a method used to estimate the workpiece surface speed in grinding processes. In this analysis, the workpiece surface speed is calculated based on various parameters such as the grinding wheel diameter, wheel rotational speed,and the depth of cut. Surface Speed of Workpiece is denoted by v_w symbol.

How to calculate Workpiece surface speed from Lindsay's semiempirical analysis using this online calculator? To use this online calculator for Workpiece surface speed from Lindsay's semiempirical analysis, enter Equivalent Wheel Diameter (d_e), Percentage Volume of Bond Material in Grinding (V_b), Grain Diameter of The Grinding wheel (d_g), Rockwell Hardness Number (N_hardness), Wheel Removal Parameter (Λ_t), Surface Speed of Wheel (v_t), Depth of Dress (a_d) & Feed (f) and hit the calculate button. Here is how the Workpiece surface speed from Lindsay's semiempirical analysis calculation can be explained with given input values -> 100000 = ((0.04^0.14*16^0.47*0.007^0.13*20^1.42*2.4)/(7.93*100000*(1/0.0048)^0.158*(1+(4*0.000657680918744346/(3*0.0009)))*0.0009^0.58*0.0048))^(1000/158).

FAQ

What is Workpiece surface speed from Lindsay's semiempirical analysis?

Workpiece surface speed from Lindsay's semiempirical analysis is a method used to estimate the workpiece surface speed in grinding processes. In this analysis, the workpiece surface speed is calculated based on various parameters such as the grinding wheel diameter, wheel rotational speed,and the depth of cut and is represented as v_w = ((d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42*Λ_t)/(7.93*100000*(1/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t))^(1000/158) or Surface Speed of Workpiece = ((Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42*Wheel Removal Parameter)/(7.93*100000*(1/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel))^(1000/158). Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed, The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material, Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation, The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is), The Wheel Removal Parameter is the ratio of the volume of wheel removed per unit time per unit thrust force, Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding, Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece & The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle.

How to calculate Workpiece surface speed from Lindsay's semiempirical analysis?

Workpiece surface speed from Lindsay's semiempirical analysis is a method used to estimate the workpiece surface speed in grinding processes. In this analysis, the workpiece surface speed is calculated based on various parameters such as the grinding wheel diameter, wheel rotational speed,and the depth of cut is calculated using Surface Speed of Workpiece = ((Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42*Wheel Removal Parameter)/(7.93*100000*(1/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel))^(1000/158). To calculate Workpiece surface speed from Lindsay's semiempirical analysis, you need Equivalent Wheel Diameter (d_e), Percentage Volume of Bond Material in Grinding (V_b), Grain Diameter of The Grinding wheel (d_g), Rockwell Hardness Number (N_hardness), Wheel Removal Parameter (Λ_t), Surface Speed of Wheel (v_t), Depth of Dress (a_d) & Feed (f). With our tool, you need to enter the respective value for Equivalent Wheel Diameter, Percentage Volume of Bond Material in Grinding, Grain Diameter of The Grinding wheel, Rockwell Hardness Number, Wheel Removal Parameter, Surface Speed of Wheel, Depth of Dress & Feed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search