Working Time given Trips per Hour for Excavating Scrap Calculator

✖Trips per Hour means the total transfer occured in a hour.ⓘ Trips per Hour [f]			+10% -10%
✖Cycle Time is the time taken to complete one trip.ⓘ Cycle Time [C_t]			+10% -10%

✖Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.ⓘ Working Time given Trips per Hour for Excavating Scrap [W_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Working Time given Trips per Hour for Excavating Scrap Solution

STEP 0: Pre-Calculation Summary

Formula Used

Working Time in Scraper Production = (Trips per Hour*Cycle Time)
W_T = (f*C_t)
This formula uses 3 Variables

Variables Used

Working Time in Scraper Production - Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.
Trips per Hour - (Measured in Hertz) - Trips per Hour means the total transfer occured in a hour.
Cycle Time - (Measured in Second) - Cycle Time is the time taken to complete one trip.

STEP 1: Convert Input(s) to Base Unit

Trips per Hour: 4 Revolution per Hour --> 0.00111111111111111 Hertz (Check conversion here)
Cycle Time: 6 Hour --> 21600 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_T = (f*C_t) --> (0.00111111111111111*21600)

Evaluating ... ...

W_T = 24

STEP 3: Convert Result to Output's Unit

24 --> No Conversion Required

FINAL ANSWER

24 <-- Working Time in Scraper Production

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Working Time given Trips per Hour for Excavating Scrap

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Working Time given Trips per Hour for Excavating Scrap Formula

LaTeX Go

Working Time in Scraper Production = (Trips per Hour*Cycle Time)
W_T = (f*C_t)

What is Cycle Time?

Cycle Time is the amount of time a team spends actually working on producing an item, up until the product is ready for shipment. It is the time it takes to complete one task.

How to Calculate Working Time given Trips per Hour for Excavating Scrap?

Working Time given Trips per Hour for Excavating Scrap calculator uses Working Time in Scraper Production = (Trips per Hour*Cycle Time) to calculate the Working Time in Scraper Production, The Working Time given Trips per Hour for Excavating Scrap is defined as the time taken to complete the work of scrap production. Working Time in Scraper Production is denoted by W_T symbol.

How to calculate Working Time given Trips per Hour for Excavating Scrap using this online calculator? To use this online calculator for Working Time given Trips per Hour for Excavating Scrap, enter Trips per Hour (f) & Cycle Time (C_t) and hit the calculate button. Here is how the Working Time given Trips per Hour for Excavating Scrap calculation can be explained with given input values -> 24 = (0.00111111111111111*21600).

FAQ

What is Working Time given Trips per Hour for Excavating Scrap?

The Working Time given Trips per Hour for Excavating Scrap is defined as the time taken to complete the work of scrap production and is represented as W_T = (f*C_t) or Working Time in Scraper Production = (Trips per Hour*Cycle Time). Trips per Hour means the total transfer occured in a hour & Cycle Time is the time taken to complete one trip.

How to calculate Working Time given Trips per Hour for Excavating Scrap?

The Working Time given Trips per Hour for Excavating Scrap is defined as the time taken to complete the work of scrap production is calculated using Working Time in Scraper Production = (Trips per Hour*Cycle Time). To calculate Working Time given Trips per Hour for Excavating Scrap, you need Trips per Hour (f) & Cycle Time (C_t). With our tool, you need to enter the respective value for Trips per Hour & Cycle Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search