Wind Load Effect given Ultimate Strength for Applied Wind Loads Calculator

✖ultimate strengths is the capacities to resist design loads and their related internal moments and forces.ⓘ Ultimate Strength [U]			+10% -10%
✖Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).ⓘ Dead Load [DL]			+10% -10%

✖Wind Load is the load, placed on the exterior of a structure by wind.ⓘ Wind Load Effect given Ultimate Strength for Applied Wind Loads [W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Two Way Slab System and Footing Formulas PDF PDF Image

Wind Load Effect given Ultimate Strength for Applied Wind Loads Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3)
W = (U-(0.9*DL))/(1.3)
This formula uses 3 Variables

Variables Used

Wind Load - (Measured in Pascal) - Wind Load is the load, placed on the exterior of a structure by wind.
Ultimate Strength - (Measured in Pascal) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Dead Load - (Measured in Pascal) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).

STEP 1: Convert Input(s) to Base Unit

Ultimate Strength: 20 Kilonewton per Square Meter --> 20000 Pascal (Check conversion here)
Dead Load: 10.01 Kilonewton per Square Meter --> 10010 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W = (U-(0.9*DL))/(1.3) --> (20000-(0.9*10010))/(1.3)

Evaluating ... ...

W = 8454.61538461538

STEP 3: Convert Result to Output's Unit

8454.61538461538 Pascal -->8.45461538461539 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

8.45461538461539 ≈ 8.454615 Kilonewton per Square Meter <-- Wind Load

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Design of Two Way Slab System and Footing » Partial Safety Factors for Loads » Wind Load Effect given Ultimate Strength for Applied Wind Loads

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)

Ultimate Strength when Wind and Earthquake Loads are not Applied

LaTeX Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Ultimate Strength when Wind Loads are Applied

LaTeX Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Wind Load Effect given Ultimate Strength for Applied Wind Loads Formula

LaTeX Go

Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3)
W = (U-(0.9*DL))/(1.3)

What is Wind Load?

Wind load is primarily horizontal load caused by the movement of air relative to earth. Wind load is required to be considered in structural design especially when the heath of the building exceeds two times the dimensions transverse to the exposed wind surface.

How to Calculate Wind Load Effect given Ultimate Strength for Applied Wind Loads?

Wind Load Effect given Ultimate Strength for Applied Wind Loads calculator uses Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3) to calculate the Wind Load, The Wind Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as the load, placed on the exterior of a structure by wind. Wind Load is denoted by W symbol.

How to calculate Wind Load Effect given Ultimate Strength for Applied Wind Loads using this online calculator? To use this online calculator for Wind Load Effect given Ultimate Strength for Applied Wind Loads, enter Ultimate Strength (U) & Dead Load (DL) and hit the calculate button. Here is how the Wind Load Effect given Ultimate Strength for Applied Wind Loads calculation can be explained with given input values -> 0.008462 = (20000-(0.9*10010))/(1.3).

FAQ

What is Wind Load Effect given Ultimate Strength for Applied Wind Loads?

The Wind Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as the load, placed on the exterior of a structure by wind and is represented as W = (U-(0.9*DL))/(1.3) or Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3). ultimate strengths is the capacities to resist design loads and their related internal moments and forces & Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).

How to calculate Wind Load Effect given Ultimate Strength for Applied Wind Loads?

The Wind Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as the load, placed on the exterior of a structure by wind is calculated using Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3). To calculate Wind Load Effect given Ultimate Strength for Applied Wind Loads, you need Ultimate Strength (U) & Dead Load (DL). With our tool, you need to enter the respective value for Ultimate Strength & Dead Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search