Width of Settling Zone given Height at Outlet Zone with respect to Discharge Calculator

✖The Outer Height refers to the external vertical dimension of an object or structure.ⓘ Outer Height [H]			+10% -10%
✖The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.ⓘ Discharge [Q]			+10% -10%
✖The Length refers to the measurement of the distance between two points.ⓘ Length [L]			+10% -10%
✖The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Crack [h]			+10% -10%
✖The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.ⓘ Falling Speed [v^']			+10% -10%

✖The Width of Settling Zone refers to the dimension that determines how much space is available for particles to settle out of a fluid.ⓘ Width of Settling Zone given Height at Outlet Zone with respect to Discharge [W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Settling Zone Formulas PDF PDF Image

Width of Settling Zone given Height at Outlet Zone with respect to Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)
W = H*Q/(L*h*v^')
This formula uses 6 Variables

Variables Used

Width of Settling Zone - (Measured in Joule per Kilogram) - The Width of Settling Zone refers to the dimension that determines how much space is available for particles to settle out of a fluid.
Outer Height - (Measured in Meter) - The Outer Height refers to the external vertical dimension of an object or structure.
Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.
Length - (Measured in Meter) - The Length refers to the measurement of the distance between two points.
Height of Crack - (Measured in Meter) - The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Falling Speed - (Measured in Meter per Second) - The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.

STEP 1: Convert Input(s) to Base Unit

Outer Height: 40 Meter --> 40 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Length: 12 Meter --> 12 Meter No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)
Falling Speed: 0.1 Meter per Second --> 0.1 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W = H*Q/(L*h*v^') --> 40*1.01/(12*12*0.1)

Evaluating ... ...

W = 2.80555555555556

STEP 3: Convert Result to Output's Unit

2.80555555555556 Joule per Kilogram --> No Conversion Required

FINAL ANSWER

2.80555555555556 ≈ 2.805556 Joule per Kilogram <-- Width of Settling Zone

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Settling Zone » Width of Settling Zone » Width of Settling Zone given Height at Outlet Zone with respect to Discharge

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Width of Settling Zone Calculators

Width of Settling Zone given Height at Outlet Zone with respect to Discharge

LaTeX Go Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)

Width of Settling Zone given Detention Time

LaTeX Go Width of Settling Zone = (Detention Time*Discharge)/(Length*Height of Crack)

Width of Settling Zone given Cross-section Area of Sedimentation Tank

LaTeX Go Width of Settling Zone = Cross-Sectional Area/Height of Crack

Width of Settling Zone given Surface Area of Sedimentation Tank

LaTeX Go Width of Settling Zone = Area/Length

Width of Settling Zone given Height at Outlet Zone with respect to Discharge Formula

LaTeX Go

Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed)
W = H*Q/(L*h*v^')

What is Discharge ?

Discharge in the stream represents the run-off in the stream at a given section and includes surface run-off as well as ground water flow.

How to Calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge?

Width of Settling Zone given Height at Outlet Zone with respect to Discharge calculator uses Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed) to calculate the Width of Settling Zone, The Width of Settling Zone given Height at Outlet Zone with respect to Discharge formlua is defined as the horizontal distance over which particles settle out of the fluid. This zone is a crucial part of the sedimentation process in water and wastewater treatment, as it allows for the removal of suspended solids through gravity settling. Width of Settling Zone is denoted by W symbol.

How to calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge using this online calculator? To use this online calculator for Width of Settling Zone given Height at Outlet Zone with respect to Discharge, enter Outer Height (H), Discharge (Q), Length (L), Height of Crack (h) & Falling Speed (v^') and hit the calculate button. Here is how the Width of Settling Zone given Height at Outlet Zone with respect to Discharge calculation can be explained with given input values -> 2.805556 = 40*1.01/(12*12*0.1).

FAQ

What is Width of Settling Zone given Height at Outlet Zone with respect to Discharge?

The Width of Settling Zone given Height at Outlet Zone with respect to Discharge formlua is defined as the horizontal distance over which particles settle out of the fluid. This zone is a crucial part of the sedimentation process in water and wastewater treatment, as it allows for the removal of suspended solids through gravity settling and is represented as W = H*Q/(L*h*v^') or Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed). The Outer Height refers to the external vertical dimension of an object or structure, The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time, The Length refers to the measurement of the distance between two points, The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress & The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.

How to calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge?

The Width of Settling Zone given Height at Outlet Zone with respect to Discharge formlua is defined as the horizontal distance over which particles settle out of the fluid. This zone is a crucial part of the sedimentation process in water and wastewater treatment, as it allows for the removal of suspended solids through gravity settling is calculated using Width of Settling Zone = Outer Height*Discharge/(Length*Height of Crack*Falling Speed). To calculate Width of Settling Zone given Height at Outlet Zone with respect to Discharge, you need Outer Height (H), Discharge (Q), Length (L), Height of Crack (h) & Falling Speed (v^'). With our tool, you need to enter the respective value for Outer Height, Discharge, Length, Height of Crack & Falling Speed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Width of Settling Zone?

In this formula, Width of Settling Zone uses Outer Height, Discharge, Length, Height of Crack & Falling Speed. We can use 3 other way(s) to calculate the same, which is/are as follows -

Width of Settling Zone = (Detention Time*Discharge)/(Length*Height of Crack)
Width of Settling Zone = Area/Length
Width of Settling Zone = Cross-Sectional Area/Height of Crack

Home

FREE PDFs

🔍 Search