Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse Calculator

✖Total Surface Area of Ramp is the total amount of two dimensional space that covers the entire surface of the Ramp.ⓘ Total Surface Area of Ramp [TSA]			+10% -10%
✖Hypotenuse of Ramp is the hypotenuse of the right triangle formed when a rectangular surface is raised at an angle to form the Ramp.ⓘ Hypotenuse of Ramp [H]			+10% -10%
✖Opposite Side of Ramp is the perpendicular of the right triangle which is formed when a rectangular surface is raised at an angle to form the Ramp.ⓘ Opposite Side of Ramp [S_Opposite]			+10% -10%

✖Width of Ramp is the measurement or extent of Ramp from side to side and equal to the width of the vertical rectangle which is formed when a rectangular plane is raised at an angle to form the Ramp.ⓘ Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse [w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download 3D Geometry Formula PDF PDF Image

Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)*Opposite Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)+Opposite Side of Ramp+Hypotenuse of Ramp)
w = (TSA-(sqrt(H^2-S_Opposite^2)*S_Opposite))/(sqrt(H^2-S_Opposite^2)+S_Opposite+H)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Width of Ramp - (Measured in Meter) - Width of Ramp is the measurement or extent of Ramp from side to side and equal to the width of the vertical rectangle which is formed when a rectangular plane is raised at an angle to form the Ramp.
Total Surface Area of Ramp - (Measured in Square Meter) - Total Surface Area of Ramp is the total amount of two dimensional space that covers the entire surface of the Ramp.
Hypotenuse of Ramp - (Measured in Meter) - Hypotenuse of Ramp is the hypotenuse of the right triangle formed when a rectangular surface is raised at an angle to form the Ramp.
Opposite Side of Ramp - (Measured in Meter) - Opposite Side of Ramp is the perpendicular of the right triangle which is formed when a rectangular surface is raised at an angle to form the Ramp.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Ramp: 360 Square Meter --> 360 Square Meter No Conversion Required
Hypotenuse of Ramp: 13 Meter --> 13 Meter No Conversion Required
Opposite Side of Ramp: 5 Meter --> 5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = (TSA-(sqrt(H^2-S_Opposite^2)*S_Opposite))/(sqrt(H^2-S_Opposite^2)+S_Opposite+H) --> (360-(sqrt(13^2-5^2)*5))/(sqrt(13^2-5^2)+5+13)

Evaluating ... ...

w = 10

STEP 3: Convert Result to Output's Unit

10 Meter --> No Conversion Required

FINAL ANSWER

10 Meter <-- Width of Ramp

(Calculation completed in 00.020 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Ramp » Width of Ramp » Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has verified this Calculator and 1700+ more calculators!

< Width of Ramp Calculators

Width of Ramp given Total Surface Area, Adjacent Side and Hypotenuse

LaTeX Go Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Adjacent Side of Ramp^2)*Adjacent Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Adjacent Side of Ramp^2)+Adjacent Side of Ramp+Hypotenuse of Ramp)

Width of Ramp given Total Surface Area, Adjacent Side and Opposite Side

LaTeX Go Width of Ramp = (Total Surface Area of Ramp-(Adjacent Side of Ramp*Opposite Side of Ramp))/(Adjacent Side of Ramp+Opposite Side of Ramp+sqrt(Adjacent Side of Ramp^2+Opposite Side of Ramp^2))

Width of Ramp given Volume, Hypotenuse and Adjacent Side

LaTeX Go Width of Ramp = (2*Volume of Ramp)/(sqrt(Hypotenuse of Ramp^2-Adjacent Side of Ramp^2)*Adjacent Side of Ramp)

Width of Ramp

LaTeX Go Width of Ramp = (2*Volume of Ramp)/(Adjacent Side of Ramp*Opposite Side of Ramp)

Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse Formula

LaTeX Go

What is Ramp?

An inclined plane, also known as a ramp, is a flat supporting surface tilted at an angle, with one end higher than the other, used as an aid for raising or lowering a load. The inclined plane is one of the six classical simple machines defined by Renaissance scientists.

How to Calculate Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse?

Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse calculator uses Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)*Opposite Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)+Opposite Side of Ramp+Hypotenuse of Ramp) to calculate the Width of Ramp, Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse formula is defined as the measurement or extent of the Ramp from side to side and equal to the width of the vertical rectangle which is formed when a rectangular plane is raised at an angle to form the Ramp and calculated using opposite side, hypotenuse and total surface area of Ramp. Width of Ramp is denoted by w symbol.

How to calculate Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse using this online calculator? To use this online calculator for Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse, enter Total Surface Area of Ramp (TSA), Hypotenuse of Ramp (H) & Opposite Side of Ramp (S_Opposite) and hit the calculate button. Here is how the Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse calculation can be explained with given input values -> 10 = (360-(sqrt(13^2-5^2)*5))/(sqrt(13^2-5^2)+5+13).

FAQ

What is Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse?

Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse formula is defined as the measurement or extent of the Ramp from side to side and equal to the width of the vertical rectangle which is formed when a rectangular plane is raised at an angle to form the Ramp and calculated using opposite side, hypotenuse and total surface area of Ramp and is represented as w = (TSA-(sqrt(H^2-S_Opposite^2)*S_Opposite))/(sqrt(H^2-S_Opposite^2)+S_Opposite+H) or Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)*Opposite Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)+Opposite Side of Ramp+Hypotenuse of Ramp). Total Surface Area of Ramp is the total amount of two dimensional space that covers the entire surface of the Ramp, Hypotenuse of Ramp is the hypotenuse of the right triangle formed when a rectangular surface is raised at an angle to form the Ramp & Opposite Side of Ramp is the perpendicular of the right triangle which is formed when a rectangular surface is raised at an angle to form the Ramp.

How to calculate Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse?

Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse formula is defined as the measurement or extent of the Ramp from side to side and equal to the width of the vertical rectangle which is formed when a rectangular plane is raised at an angle to form the Ramp and calculated using opposite side, hypotenuse and total surface area of Ramp is calculated using Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)*Opposite Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Opposite Side of Ramp^2)+Opposite Side of Ramp+Hypotenuse of Ramp). To calculate Width of Ramp given Total Surface Area, Opposite Side and Hypotenuse, you need Total Surface Area of Ramp (TSA), Hypotenuse of Ramp (H) & Opposite Side of Ramp (S_Opposite). With our tool, you need to enter the respective value for Total Surface Area of Ramp, Hypotenuse of Ramp & Opposite Side of Ramp and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Width of Ramp?

In this formula, Width of Ramp uses Total Surface Area of Ramp, Hypotenuse of Ramp & Opposite Side of Ramp. We can use 3 other way(s) to calculate the same, which is/are as follows -

Width of Ramp = (Total Surface Area of Ramp-(sqrt(Hypotenuse of Ramp^2-Adjacent Side of Ramp^2)*Adjacent Side of Ramp))/(sqrt(Hypotenuse of Ramp^2-Adjacent Side of Ramp^2)+Adjacent Side of Ramp+Hypotenuse of Ramp)
Width of Ramp = (Total Surface Area of Ramp-(Adjacent Side of Ramp*Opposite Side of Ramp))/(Adjacent Side of Ramp+Opposite Side of Ramp+sqrt(Adjacent Side of Ramp^2+Opposite Side of Ramp^2))
Width of Ramp = (2*Volume of Ramp)/(Adjacent Side of Ramp*Opposite Side of Ramp)

Home

FREE PDFs

🔍 Search