Width of plate given nominal tensile stress at edge of crack Calculator

✖Load on cracked plate is basically the amount of load/force that is acting on a cracked plate.ⓘ Load on Cracked Plate [L]			+10% -10%
✖Tensile Stress at Crack Edge is the amount of tensile stress at the edge of the crack of a structural member.ⓘ Tensile Stress at Crack Edge [σ]			+10% -10%
✖Thickness of Cracked Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.ⓘ Thickness of Cracked Plate [t]			+10% -10%

✖Width of Plate is the width or the lateral dimension of the plate or a metal sheet under consideration.ⓘ Width of plate given nominal tensile stress at edge of crack [w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Width of plate given nominal tensile stress at edge of crack Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width of Plate = (Load on Cracked Plate/((Tensile Stress at Crack Edge)*Thickness of Cracked Plate))
w = (L/((σ)*t))
This formula uses 4 Variables

Variables Used

Width of Plate - (Measured in Meter) - Width of Plate is the width or the lateral dimension of the plate or a metal sheet under consideration.
Load on Cracked Plate - (Measured in Newton) - Load on cracked plate is basically the amount of load/force that is acting on a cracked plate.
Tensile Stress at Crack Edge - (Measured in Pascal) - Tensile Stress at Crack Edge is the amount of tensile stress at the edge of the crack of a structural member.
Thickness of Cracked Plate - (Measured in Meter) - Thickness of Cracked Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

STEP 1: Convert Input(s) to Base Unit

Load on Cracked Plate: 5250 Newton --> 5250 Newton No Conversion Required
Tensile Stress at Crack Edge: 50 Newton per Square Millimeter --> 50000000 Pascal (Check conversion here)
Thickness of Cracked Plate: 1.5 Millimeter --> 0.0015 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = (L/((σ)*t)) --> (5250/((50000000)*0.0015))

Evaluating ... ...

w = 0.07

STEP 3: Convert Result to Output's Unit

0.07 Meter -->70 Millimeter (Check conversion here)

FINAL ANSWER

70 Millimeter <-- Width of Plate

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design Against Static Load » Fracture Mechanics » Width of plate given nominal tensile stress at edge of crack

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Fracture Mechanics Calculators

Nominal tensile stress at edge of crack given stress intensity factor

LaTeX Go Tensile Stress at Crack Edge = (Stress Intensity Factor)/sqrt(pi*Half Crack Length)

Stress Intensity factor for cracked plate

LaTeX Go Stress Intensity Factor = Tensile Stress at Crack Edge*(sqrt(pi*Half Crack Length))

Nominal tensile stress at edge of crack given load, plate thickness and plate width

LaTeX Go Tensile Stress at Crack Edge = Load on Cracked Plate/(Width of Plate*Thickness of Cracked Plate)

Half crack length given stress intensity factor

LaTeX Go Half Crack Length = ((Stress Intensity Factor/Tensile Stress at Crack Edge)^2)/pi

Width of plate given nominal tensile stress at edge of crack Formula

LaTeX Go

Width of Plate = (Load on Cracked Plate/((Tensile Stress at Crack Edge)*Thickness of Cracked Plate))
w = (L/((σ)*t))

Beam vs Column

The beam is a horizontal structural component that mainly carries vertical loads. In contrast, columns are vertical compression members that span from substructure to superstructure and have a vital role in transferring load from the top of the structure to the foundation.

How to Calculate Width of plate given nominal tensile stress at edge of crack?

Width of plate given nominal tensile stress at edge of crack calculator uses Width of Plate = (Load on Cracked Plate/((Tensile Stress at Crack Edge)*Thickness of Cracked Plate)) to calculate the Width of Plate, Width of plate given nominal tensile stress at edge of crack is the width (lateral dimension) of the plate for which the stress at the crack is to be found. Width of Plate is denoted by w symbol.

How to calculate Width of plate given nominal tensile stress at edge of crack using this online calculator? To use this online calculator for Width of plate given nominal tensile stress at edge of crack, enter Load on Cracked Plate (L), Tensile Stress at Crack Edge (σ) & Thickness of Cracked Plate (t) and hit the calculate button. Here is how the Width of plate given nominal tensile stress at edge of crack calculation can be explained with given input values -> 70000 = (5250/((50000000)*0.0015)).

FAQ

What is Width of plate given nominal tensile stress at edge of crack?

Width of plate given nominal tensile stress at edge of crack is the width (lateral dimension) of the plate for which the stress at the crack is to be found and is represented as w = (L/((σ)*t)) or Width of Plate = (Load on Cracked Plate/((Tensile Stress at Crack Edge)*Thickness of Cracked Plate)). Load on cracked plate is basically the amount of load/force that is acting on a cracked plate, Tensile Stress at Crack Edge is the amount of tensile stress at the edge of the crack of a structural member & Thickness of Cracked Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

How to calculate Width of plate given nominal tensile stress at edge of crack?

Width of plate given nominal tensile stress at edge of crack is the width (lateral dimension) of the plate for which the stress at the crack is to be found is calculated using Width of Plate = (Load on Cracked Plate/((Tensile Stress at Crack Edge)*Thickness of Cracked Plate)). To calculate Width of plate given nominal tensile stress at edge of crack, you need Load on Cracked Plate (L), Tensile Stress at Crack Edge (σ) & Thickness of Cracked Plate (t). With our tool, you need to enter the respective value for Load on Cracked Plate, Tensile Stress at Crack Edge & Thickness of Cracked Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search