Width of Parshall Flume given Depth of Parshall Flume Solution

STEP 0: Pre-Calculation Summary
Formula Used
Width = sqrt(Depth/Integration Constant)
w = sqrt(d/c)
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Width - (Measured in Meter) - Width is the measurement or extent of something from side to side.
Depth - (Measured in Meter) - Depth is the distance from the top or surface to the bottom of something.
Integration Constant - Integration Constant is a constant that is added to the function obtained by evaluating the indefinite integral of a given function.
STEP 1: Convert Input(s) to Base Unit
Depth: 4.04 Meter --> 4.04 Meter No Conversion Required
Integration Constant: 6.9 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
w = sqrt(d/c) --> sqrt(4.04/6.9)
Evaluating ... ...
w = 0.765184452519006
STEP 3: Convert Result to Output's Unit
0.765184452519006 Meter --> No Conversion Required
FINAL ANSWER
0.765184452519006 0.765184 Meter <-- Width
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Parshall Flume Calculators

Depth of Parshall Flume given Discharge
​ LaTeX ​ Go Depth of Flow = (Environmental Discharge/Integration Constant)^(1/Constant for a 6-inch Parshall flume)
Depth of Flow in Upstream Leg of Flume at One Third Point given Discharge
​ LaTeX ​ Go Depth of Flow = (Environmental Discharge/(2.264*Width of Throat))^(2/3)
Discharge Passing through Parshall Flume
​ LaTeX ​ Go Environmental Discharge = (2.264*Width of Throat*(Depth of Flow)^(3/2))
Width of Throat given Discharge
​ LaTeX ​ Go Width of Throat = Environmental Discharge/(2.264*(Depth of Flow)^(3/2))

Width of Parshall Flume given Depth of Parshall Flume Formula

​LaTeX ​Go
Width = sqrt(Depth/Integration Constant)
w = sqrt(d/c)

What is Parshall Flume?

The Parshall flume is a fixed hydraulic structure. It is used to measure volumetric flow rate in industrial discharges, municipal sewer lines, and influent/effluent flows in wastewater treatment plants.

How to Calculate Width of Parshall Flume given Depth of Parshall Flume?

Width of Parshall Flume given Depth of Parshall Flume calculator uses Width = sqrt(Depth/Integration Constant) to calculate the Width, The Width of Parshall Flume given Depth of Parshall Flume formula is defined as the value of specific width of the flume's throat or constricted section, which is related to the depth of water flowing through it. Width is denoted by w symbol.

How to calculate Width of Parshall Flume given Depth of Parshall Flume using this online calculator? To use this online calculator for Width of Parshall Flume given Depth of Parshall Flume, enter Depth (d) & Integration Constant (c) and hit the calculate button. Here is how the Width of Parshall Flume given Depth of Parshall Flume calculation can be explained with given input values -> 0.765184 = sqrt(4.04/6.9).

FAQ

What is Width of Parshall Flume given Depth of Parshall Flume?
The Width of Parshall Flume given Depth of Parshall Flume formula is defined as the value of specific width of the flume's throat or constricted section, which is related to the depth of water flowing through it and is represented as w = sqrt(d/c) or Width = sqrt(Depth/Integration Constant). Depth is the distance from the top or surface to the bottom of something & Integration Constant is a constant that is added to the function obtained by evaluating the indefinite integral of a given function.
How to calculate Width of Parshall Flume given Depth of Parshall Flume?
The Width of Parshall Flume given Depth of Parshall Flume formula is defined as the value of specific width of the flume's throat or constricted section, which is related to the depth of water flowing through it is calculated using Width = sqrt(Depth/Integration Constant). To calculate Width of Parshall Flume given Depth of Parshall Flume, you need Depth (d) & Integration Constant (c). With our tool, you need to enter the respective value for Depth & Integration Constant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!