Width of lever arm given depth Calculator

✖Depth of Lever Arm is the thickness of the lever arm measured parallel to the applied force on respective arms.ⓘ Depth of Lever Arm [d]

+10%

-10%

✖Width of Lever Arm is the thickness or the width of the lever arm measured perpendicular to the applied force on respective arms.ⓘ Width of lever arm given depth [b_l]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Width of lever arm given depth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width of Lever Arm = Depth of Lever Arm/2
b_l = d/2
This formula uses 2 Variables

Variables Used

Width of Lever Arm - (Measured in Meter) - Width of Lever Arm is the thickness or the width of the lever arm measured perpendicular to the applied force on respective arms.
Depth of Lever Arm - (Measured in Meter) - Depth of Lever Arm is the thickness of the lever arm measured parallel to the applied force on respective arms.

STEP 1: Convert Input(s) to Base Unit

Depth of Lever Arm: 36.5 Millimeter --> 0.0365 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b_l = d/2 --> 0.0365/2

Evaluating ... ...

b_l = 0.01825

STEP 3: Convert Result to Output's Unit

0.01825 Meter -->18.25 Millimeter (Check conversion here)

FINAL ANSWER

18.25 Millimeter <-- Width of Lever Arm

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Lever » Lever Arm » Width of lever arm given depth

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Lever Arm Calculators

Angle between arms of lever given effort, load and net reaction at fulcrum

LaTeX Go Angle Between Lever Arms = arccos(((Load on lever^2)+(Effort on Lever^2)-(Net Force at Lever Fulcrum Pin^2))/(2*Load on lever*Effort on Lever))

Length of major axis for elliptical cross sectioned lever given minor axis

LaTeX Go Major Axis of Lever Ellipse Section = 2*Minor Axis of Lever Ellipse Section

Depth of lever arm given width

LaTeX Go Depth of Lever Arm = 2*Width of Lever Arm

Width of lever arm given depth

LaTeX Go Width of Lever Arm = Depth of Lever Arm/2

Width of lever arm given depth Formula

LaTeX Go

Width of Lever Arm = Depth of Lever Arm/2
b_l = d/2

What is hydraulic leverage?

Just as we experience a tradeoff of force vs. distance in mechanical leverage, so too with hydraulic leverage. A small force on a small piston can balance a higher force on a larger piston; however, though force is multiplied, distance (speed) is sacrificed.

How to Calculate Width of lever arm given depth?

Width of lever arm given depth calculator uses Width of Lever Arm = Depth of Lever Arm/2 to calculate the Width of Lever Arm, The Width of lever arm given depth is the thickness or the width of the lever arm measured perpendicular to the applied force on the respective arms. Width of Lever Arm is denoted by b_l symbol.

How to calculate Width of lever arm given depth using this online calculator? To use this online calculator for Width of lever arm given depth, enter Depth of Lever Arm (d) and hit the calculate button. Here is how the Width of lever arm given depth calculation can be explained with given input values -> 18250 = 0.0365/2.

FAQ

What is Width of lever arm given depth?

The Width of lever arm given depth is the thickness or the width of the lever arm measured perpendicular to the applied force on the respective arms and is represented as b_l = d/2 or Width of Lever Arm = Depth of Lever Arm/2. Depth of Lever Arm is the thickness of the lever arm measured parallel to the applied force on respective arms.

How to calculate Width of lever arm given depth?

The Width of lever arm given depth is the thickness or the width of the lever arm measured perpendicular to the applied force on the respective arms is calculated using Width of Lever Arm = Depth of Lever Arm/2. To calculate Width of lever arm given depth, you need Depth of Lever Arm (d). With our tool, you need to enter the respective value for Depth of Lever Arm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search