Width given Maximum Bending Stress of Leaf Spring Calculator

✖Spring Load is the instantaneous load applied perpendicular to the specimen cross section.ⓘ Spring Load [W_load]			+10% -10%
✖Length in Spring is the measurement or extent of something from end to end.ⓘ Length in Spring [L]			+10% -10%
✖Number of Plates is the count of plates in the leaf spring.ⓘ Number of Plates [n]			+10% -10%
✖Maximum Bending Stress in Leaf Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend.ⓘ Maximum Bending Stress in Leaf Spring [f_{leaf spring}]			+10% -10%
✖Thickness of Section is the dimension through an object, as opposed to length or width.ⓘ Thickness of Section [t]			+10% -10%

✖Width of Cross Section is the geometric measurement or extent of the member from side to side.ⓘ Width given Maximum Bending Stress of Leaf Spring [b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Maximum Bending Stress in Spring Formulas PDF PDF Image

Width given Maximum Bending Stress of Leaf Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width of Cross Section = (3*Spring Load*Length in Spring)/(2*Number of Plates*Maximum Bending Stress in Leaf Spring*Thickness of Section^2)
b = (3*W_load*L)/(2*n*f_{leaf spring}*t^2)
This formula uses 6 Variables

Variables Used

Width of Cross Section - (Measured in Meter) - Width of Cross Section is the geometric measurement or extent of the member from side to side.
Spring Load - (Measured in Newton) - Spring Load is the instantaneous load applied perpendicular to the specimen cross section.
Length in Spring - (Measured in Meter) - Length in Spring is the measurement or extent of something from end to end.
Number of Plates - Number of Plates is the count of plates in the leaf spring.
Maximum Bending Stress in Leaf Spring - (Measured in Pascal) - Maximum Bending Stress in Leaf Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend.
Thickness of Section - (Measured in Meter) - Thickness of Section is the dimension through an object, as opposed to length or width.

STEP 1: Convert Input(s) to Base Unit

Spring Load: 85 Newton --> 85 Newton No Conversion Required
Length in Spring: 4170 Millimeter --> 4.17 Meter (Check conversion here)
Number of Plates: 8 --> No Conversion Required
Maximum Bending Stress in Leaf Spring: 1047 Pascal --> 1047 Pascal No Conversion Required
Thickness of Section: 460 Millimeter --> 0.46 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = (3*W_load*L)/(2*n*f_{leaf spring}*t^2) --> (3*85*4.17)/(2*8*1047*0.46^2)

Evaluating ... ...

b = 0.299981109949572

STEP 3: Convert Result to Output's Unit

0.299981109949572 Meter -->299.981109949572 Millimeter (Check conversion here)

FINAL ANSWER

299.981109949572 ≈ 299.9811 Millimeter <-- Width of Cross Section

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Spring » Maximum Bending Stress in Spring » Leaf Springs » Width given Maximum Bending Stress of Leaf Spring

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Leaf Springs Calculators

Number of Plates given Maximum Bending Stress of Leaf Spring

LaTeX Go Number of Plates = (3*Spring Load*Length in Spring)/(2*Maximum Bending Stress in Leaf Spring*Width of Cross Section*Thickness of Section^2)

Length given Maximum Bending Stress of Leaf Spring

LaTeX Go Length in Spring = (2*Maximum Bending Stress in Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^2)/(3*Spring Load)

Load given Maximum Bending Stress of Leaf Spring

LaTeX Go Spring Load = (2*Maximum Bending Stress in Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^2)/(3*Length in Spring)

Maximum Bending Stress of Leaf Spring

LaTeX Go Maximum Bending Stress in Leaf Spring = (3*Spring Load*Length in Spring)/(2*Number of Plates*Width of Cross Section*Thickness of Section^2)

Width given Maximum Bending Stress of Leaf Spring Formula

LaTeX Go

Width of Cross Section = (3*Spring Load*Length in Spring)/(2*Number of Plates*Maximum Bending Stress in Leaf Spring*Thickness of Section^2)
b = (3*W_load*L)/(2*n*f_{leaf spring}*t^2)

What is Leaf Spring?

A leaf spring takes the form of a slender arc-shaped length of spring steel of rectangular cross-section. In the most common configuration, the center of the arc provides location for the axle, while loops formed at either end provide for attaching to the vehicle chassis. For very heavy vehicles, a leaf spring can be made from several leaves stacked on top of each other in several layers, often with progressively shorter leaves.

How to Calculate Width given Maximum Bending Stress of Leaf Spring?

Width given Maximum Bending Stress of Leaf Spring calculator uses Width of Cross Section = (3*Spring Load*Length in Spring)/(2*Number of Plates*Maximum Bending Stress in Leaf Spring*Thickness of Section^2) to calculate the Width of Cross Section, The Width given Maximum Bending Stress of Leaf Spring formula is defined as the width of the cross-section of any plate of spring assembly. Width of Cross Section is denoted by b symbol.

How to calculate Width given Maximum Bending Stress of Leaf Spring using this online calculator? To use this online calculator for Width given Maximum Bending Stress of Leaf Spring, enter Spring Load (W_load), Length in Spring (L), Number of Plates (n), Maximum Bending Stress in Leaf Spring (f_{leaf spring}) & Thickness of Section (t) and hit the calculate button. Here is how the Width given Maximum Bending Stress of Leaf Spring calculation can be explained with given input values -> 299981.1 = (3*85*4.17)/(2*8*1047*0.46^2).

FAQ

What is Width given Maximum Bending Stress of Leaf Spring?

The Width given Maximum Bending Stress of Leaf Spring formula is defined as the width of the cross-section of any plate of spring assembly and is represented as b = (3*W_load*L)/(2*n*f_{leaf spring}*t^2) or Width of Cross Section = (3*Spring Load*Length in Spring)/(2*Number of Plates*Maximum Bending Stress in Leaf Spring*Thickness of Section^2). Spring Load is the instantaneous load applied perpendicular to the specimen cross section, Length in Spring is the measurement or extent of something from end to end, Number of Plates is the count of plates in the leaf spring, Maximum Bending Stress in Leaf Spring is the maximum normal stress that is induced at a point in a body subjected to loads that cause it to bend & Thickness of Section is the dimension through an object, as opposed to length or width.

How to calculate Width given Maximum Bending Stress of Leaf Spring?

The Width given Maximum Bending Stress of Leaf Spring formula is defined as the width of the cross-section of any plate of spring assembly is calculated using Width of Cross Section = (3*Spring Load*Length in Spring)/(2*Number of Plates*Maximum Bending Stress in Leaf Spring*Thickness of Section^2). To calculate Width given Maximum Bending Stress of Leaf Spring, you need Spring Load (W_load), Length in Spring (L), Number of Plates (n), Maximum Bending Stress in Leaf Spring (f_{leaf spring}) & Thickness of Section (t). With our tool, you need to enter the respective value for Spring Load, Length in Spring, Number of Plates, Maximum Bending Stress in Leaf Spring & Thickness of Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search