Wheel removal parameter from Lindsay's semiempirical analysis Calculator

✖Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.ⓘ Surface Speed of Workpiece [v_w]			+10% -10%
✖Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding.ⓘ Surface Speed of Wheel [v_t]			+10% -10%
✖Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece.ⓘ Depth of Dress [a_d]			+10% -10%
✖The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle.ⓘ Feed [f]			+10% -10%
✖Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed.ⓘ Equivalent Wheel Diameter [d_e]			+10% -10%
✖The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material.ⓘ Percentage Volume of Bond Material in Grinding [V_b]			+10% -10%
✖Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation.ⓘ Grain Diameter of The Grinding wheel [d_g]			+10% -10%
✖The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is).ⓘ Rockwell Hardness Number [N_hardness]			+10% -10%

✖The Wheel Removal Parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.ⓘ Wheel removal parameter from Lindsay's semiempirical analysis [Λ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Grinding Operation Formula PDF PDF Image

Wheel removal parameter from Lindsay's semiempirical analysis Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42)
Λ_t = (7.93*100000*(v_w/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t)/(d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42)
This formula uses 9 Variables

Variables Used

Wheel Removal Parameter - The Wheel Removal Parameter is the ratio of the volume of wheel removed per unit time per unit thrust force.
Surface Speed of Workpiece - (Measured in Meter per Second) - Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool.
Surface Speed of Wheel - (Measured in Meter per Second) - Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding.
Depth of Dress - (Measured in Meter) - Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece.
Feed - (Measured in Meter) - The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle.
Equivalent Wheel Diameter - (Measured in Meter) - Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed.
Percentage Volume of Bond Material in Grinding - The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material.
Grain Diameter of The Grinding wheel - (Measured in Meter) - Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation.
Rockwell Hardness Number - The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is).

STEP 1: Convert Input(s) to Base Unit

Surface Speed of Workpiece: 100 Millimeter per Second --> 0.1 Meter per Second (Check conversion here)
Surface Speed of Wheel: 4.8 Millimeter per Second --> 0.0048 Meter per Second (Check conversion here)
Depth of Dress: 0.657680918744346 Millimeter --> 0.000657680918744346 Meter (Check conversion here)
Feed: 0.9 Millimeter --> 0.0009 Meter (Check conversion here)
Equivalent Wheel Diameter: 40 Millimeter --> 0.04 Meter (Check conversion here)
Percentage Volume of Bond Material in Grinding: 16 --> No Conversion Required
Grain Diameter of The Grinding wheel: 7 Millimeter --> 0.007 Meter (Check conversion here)
Rockwell Hardness Number: 20 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Λ_t = (7.93*100000*(v_w/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t)/(d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42) --> (7.93*100000*(0.1/0.0048)^0.158*(1+(4*0.000657680918744346/(3*0.0009)))*0.0009^0.58*0.0048)/(0.04^0.14*16^0.47*0.007^0.13*20^1.42)

Evaluating ... ...

Λ_t = 2.4

STEP 3: Convert Result to Output's Unit

2.4 --> No Conversion Required

FINAL ANSWER

2.4 <-- Wheel Removal Parameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Lindsay Semiempirical Analysis » Wheel removal parameter from Lindsay's semiempirical analysis

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Lindsay Semiempirical Analysis Calculators

Equivalent wheel diameter from Lindsay's semiempirical analysis

LaTeX Go Equivalent Wheel Diameter = ((7.93*100000*((Surface Speed of Workpiece/Surface Speed of Wheel)^0.158)*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Wheel Removal Parameter*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42))^(100/14)

Percentage Volume of Bond material from Lindsay's semiempirical analysis

LaTeX Go Percentage Volume of Bond Material in Grinding = ((7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Wheel Removal Parameter*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42))^(100/47)

Grain diameter from Lindsay's semiempirical analysis

LaTeX Go Grain Diameter of The Grinding wheel = ((7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Wheel Removal Parameter*Rockwell Hardness Number^1.42))^(100/13)

Wheel removal parameter from Lindsay's semiempirical analysis

LaTeX Go Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42)

Wheel removal parameter from Lindsay's semiempirical analysis Formula

LaTeX Go

What is dressing operation?

The dressing is the process of sharpening a grinding wheel. In most grinding operations, small chips of workpiece material can become lodged in the cutting surface. If the wheel bonding hardness is excessive, dulled abrasive grains can remain in the grinding wheel.

How to Calculate Wheel removal parameter from Lindsay's semiempirical analysis?

Wheel removal parameter from Lindsay's semiempirical analysis calculator uses Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42) to calculate the Wheel Removal Parameter, Wheel removal parameter from Lindsay's semiempirical analysis is a method used to estimate the material removal rate (MRR) in grinding processes. In Lindsay's analysis, the material removal rate is related to the grinding parameters such as the depth of cut, feed rate, and wheel properties. The wheel removal parameter in Lindsay's analysis is a key factor that quantifies the efficiency of material removal by the grinding wheel. Wheel Removal Parameter is denoted by Λ_t symbol.

How to calculate Wheel removal parameter from Lindsay's semiempirical analysis using this online calculator? To use this online calculator for Wheel removal parameter from Lindsay's semiempirical analysis, enter Surface Speed of Workpiece (v_w), Surface Speed of Wheel (v_t), Depth of Dress (a_d), Feed (f), Equivalent Wheel Diameter (d_e), Percentage Volume of Bond Material in Grinding (V_b), Grain Diameter of The Grinding wheel (d_g) & Rockwell Hardness Number (N_hardness) and hit the calculate button. Here is how the Wheel removal parameter from Lindsay's semiempirical analysis calculation can be explained with given input values -> 2.4 = (7.93*100000*(0.1/0.0048)^0.158*(1+(4*0.000657680918744346/(3*0.0009)))*0.0009^0.58*0.0048)/(0.04^0.14*16^0.47*0.007^0.13*20^1.42).

FAQ

What is Wheel removal parameter from Lindsay's semiempirical analysis?

Wheel removal parameter from Lindsay's semiempirical analysis is a method used to estimate the material removal rate (MRR) in grinding processes. In Lindsay's analysis, the material removal rate is related to the grinding parameters such as the depth of cut, feed rate, and wheel properties. The wheel removal parameter in Lindsay's analysis is a key factor that quantifies the efficiency of material removal by the grinding wheel and is represented as Λ_t = (7.93*100000*(v_w/v_t)^0.158*(1+(4*a_d/(3*f)))*f^0.58*v_t)/(d_e^0.14*V_b^0.47*d_g^0.13*N_hardness^1.42) or Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42). Surface Speed of Workpiece is the speed of the surface rotating with respect to grinding tool, Surface speed of wheel is defined as the speed of the surface of the wheel which is used for grinding, Depth of Dress in the dressing process is defined as the amount displacement of the dressing tool towards the workpiece, The Feed is the distance from the cutting tool advances along the length of the work for every revolution of the spindle, Equivalent Wheel Diameter is the diameter of the grinding wheel used in plunge surface that would give the same length of work wheel contact for the same feed speed, The Percentage Volume of Bond Material in Grinding refers to the proportion of the total volume of the grinding wheel that is occupied by the bond material, Grain Diameter of The Grinding wheel is defined as the actual diameter of the grain of the grinding wheel used in grinding operation & The Rockwell Hardness Number is directly related to the indentation hardness of the plastic material (i.e., the higher the reading of Rockwell Hardness Number ,the harder the material is).

How to calculate Wheel removal parameter from Lindsay's semiempirical analysis?

Wheel removal parameter from Lindsay's semiempirical analysis is a method used to estimate the material removal rate (MRR) in grinding processes. In Lindsay's analysis, the material removal rate is related to the grinding parameters such as the depth of cut, feed rate, and wheel properties. The wheel removal parameter in Lindsay's analysis is a key factor that quantifies the efficiency of material removal by the grinding wheel is calculated using Wheel Removal Parameter = (7.93*100000*(Surface Speed of Workpiece/Surface Speed of Wheel)^0.158*(1+(4*Depth of Dress/(3*Feed)))*Feed^0.58*Surface Speed of Wheel)/(Equivalent Wheel Diameter^0.14*Percentage Volume of Bond Material in Grinding^0.47*Grain Diameter of The Grinding wheel^0.13*Rockwell Hardness Number^1.42). To calculate Wheel removal parameter from Lindsay's semiempirical analysis, you need Surface Speed of Workpiece (v_w), Surface Speed of Wheel (v_t), Depth of Dress (a_d), Feed (f), Equivalent Wheel Diameter (d_e), Percentage Volume of Bond Material in Grinding (V_b), Grain Diameter of The Grinding wheel (d_g) & Rockwell Hardness Number (N_hardness). With our tool, you need to enter the respective value for Surface Speed of Workpiece, Surface Speed of Wheel, Depth of Dress, Feed, Equivalent Wheel Diameter, Percentage Volume of Bond Material in Grinding, Grain Diameter of The Grinding wheel & Rockwell Hardness Number and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search