Wheel Base given Turning Radius of Outer Front Wheel Calculator

✖Turning Radius of Outer Front Wheel while cornering is the radius of circle traced by outer front wheel while cornering.ⓘ Turning Radius of Outer Front Wheel [R_of]			+10% -10%
✖Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).ⓘ Track Width of Vehicle [a_tw]			+10% -10%
✖Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.ⓘ Distance between Front Wheel Pivot Center [c]			+10% -10%
✖Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering.ⓘ Angle of Outside Wheel Lock [φ]			+10% -10%

✖Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.ⓘ Wheel Base given Turning Radius of Outer Front Wheel [b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Turning Dynamics Formulas PDF PDF Image

Wheel Base given Turning Radius of Outer Front Wheel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wheelbase of Vehicle = (Turning Radius of Outer Front Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Outside Wheel Lock)
b = (R_of-(a_tw-c)/2)*sin(φ)
This formula uses 1 Functions, 5 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Wheelbase of Vehicle - (Measured in Meter) - Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.
Turning Radius of Outer Front Wheel - (Measured in Meter) - Turning Radius of Outer Front Wheel while cornering is the radius of circle traced by outer front wheel while cornering.
Track Width of Vehicle - (Measured in Meter) - Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).
Distance between Front Wheel Pivot Center - (Measured in Meter) - Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.
Angle of Outside Wheel Lock - (Measured in Radian) - Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering.

STEP 1: Convert Input(s) to Base Unit

Turning Radius of Outer Front Wheel: 5110 Millimeter --> 5.11 Meter (Check conversion here)
Track Width of Vehicle: 1999 Millimeter --> 1.999 Meter (Check conversion here)
Distance between Front Wheel Pivot Center: 1300 Millimeter --> 1.3 Meter (Check conversion here)
Angle of Outside Wheel Lock: 30 Degree --> 0.5235987755982 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = (R_of-(a_tw-c)/2)*sin(φ) --> (5.11-(1.999-1.3)/2)*sin(0.5235987755982)

Evaluating ... ...

b = 2.38025

STEP 3: Convert Result to Output's Unit

2.38025 Meter -->2380.25 Millimeter (Check conversion here)

FINAL ANSWER

2380.25 Millimeter <-- Wheelbase of Vehicle

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Automobile » Front Axle and Steering » Mechanical » Turning Dynamics » Wheel Base given Turning Radius of Outer Front Wheel

Credits

Created by Vivek Gaikwad

AISSMS College of Engineering, Pune (AISSMSCOE, Pune), Pune

Vivek Gaikwad has created this Calculator and 25+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Turning Dynamics Calculators

Pivot Centre given Turning Radius of Outer Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/sin(Angle of Outside Wheel Lock)+Turning Radius of Outer Front Wheel)

Pivot Centre given Turning Radius of Outer Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock)+Turning Radius of Outer Rear Wheel)

Pivot Centre given Turning Radius of Inner Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel)

Pivot Centre given Turning Radius of Inner Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/tan(Angle of Inside Wheel Lock)-Turning Radius of Inner Rear Wheel)

Wheel Base given Turning Radius of Outer Front Wheel Formula

LaTeX Go

Wheelbase of Vehicle = (Turning Radius of Outer Front Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Outside Wheel Lock)
b = (R_of-(a_tw-c)/2)*sin(φ)

What is Wheelbase of vehicle?

Wheelbase of vehicle is the center distance between the front and the rear axle of the vehicle. It is directly proportional to turning radius.

How to Calculate Wheel Base given Turning Radius of Outer Front Wheel?

Wheel Base given Turning Radius of Outer Front Wheel calculator uses Wheelbase of Vehicle = (Turning Radius of Outer Front Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Outside Wheel Lock) to calculate the Wheelbase of Vehicle, The Wheel Base given Turning Radius of Outer Front Wheel is the center distance between the front and the rear axle of the vehicle. Wheelbase of Vehicle is denoted by b symbol.

How to calculate Wheel Base given Turning Radius of Outer Front Wheel using this online calculator? To use this online calculator for Wheel Base given Turning Radius of Outer Front Wheel, enter Turning Radius of Outer Front Wheel (R_of), Track Width of Vehicle (a_tw), Distance between Front Wheel Pivot Center (c) & Angle of Outside Wheel Lock (φ) and hit the calculate button. Here is how the Wheel Base given Turning Radius of Outer Front Wheel calculation can be explained with given input values -> 2.7E+6 = (5.11-(1.999-1.3)/2)*sin(0.5235987755982).

FAQ

What is Wheel Base given Turning Radius of Outer Front Wheel?

The Wheel Base given Turning Radius of Outer Front Wheel is the center distance between the front and the rear axle of the vehicle and is represented as b = (R_of-(a_tw-c)/2)*sin(φ) or Wheelbase of Vehicle = (Turning Radius of Outer Front Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Outside Wheel Lock). Turning Radius of Outer Front Wheel while cornering is the radius of circle traced by outer front wheel while cornering, Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle), Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering & Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering.

How to calculate Wheel Base given Turning Radius of Outer Front Wheel?

The Wheel Base given Turning Radius of Outer Front Wheel is the center distance between the front and the rear axle of the vehicle is calculated using Wheelbase of Vehicle = (Turning Radius of Outer Front Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Outside Wheel Lock). To calculate Wheel Base given Turning Radius of Outer Front Wheel, you need Turning Radius of Outer Front Wheel (R_of), Track Width of Vehicle (a_tw), Distance between Front Wheel Pivot Center (c) & Angle of Outside Wheel Lock (φ). With our tool, you need to enter the respective value for Turning Radius of Outer Front Wheel, Track Width of Vehicle, Distance between Front Wheel Pivot Center & Angle of Outside Wheel Lock and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Wheelbase of Vehicle?

In this formula, Wheelbase of Vehicle uses Turning Radius of Outer Front Wheel, Track Width of Vehicle, Distance between Front Wheel Pivot Center & Angle of Outside Wheel Lock. We can use 3 other way(s) to calculate the same, which is/are as follows -

Wheelbase of Vehicle = (Turning Radius of Inner Front Wheel+(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*sin(Angle of Inside Wheel Lock)
Wheelbase of Vehicle = (Turning Radius of Inner Rear Wheel+(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*tan(Angle of Inside Wheel Lock)
Wheelbase of Vehicle = (Turning Radius of Outer Rear Wheel-(Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)*tan(Angle of Outside Wheel Lock)

Home

FREE PDFs

🔍 Search