Well Function given Drawdown Calculator

✖Formation Constant T given Change in Drawdown is defined as the difference at the two wells.ⓘ Formation Constant T given Change in Drawdown [F_T]			+10% -10%
✖Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown in Well [s_t]			+10% -10%
✖Discharge is the rate of flow of a fluid in unsteady flow.ⓘ Discharge [Q]			+10% -10%

✖Well Function of u is the data plot of drawdown versus time (or drawdown versus t/rz) is matched to the type curve of W(u) versus 1/u.ⓘ Well Function given Drawdown [W_u]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unsteady Flow Formulas PDF PDF Image

Well Function given Drawdown Solution

STEP 0: Pre-Calculation Summary

Formula Used

Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge
W_u = (4*pi*F_T*s_t)/Q
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Well Function of u - Well Function of u is the data plot of drawdown versus time (or drawdown versus t/rz) is matched to the type curve of W(u) versus 1/u.
Formation Constant T given Change in Drawdown - (Measured in Square Meter per Second) - Formation Constant T given Change in Drawdown is defined as the difference at the two wells.
Total Drawdown in Well - (Measured in Meter) - Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a fluid in unsteady flow.

STEP 1: Convert Input(s) to Base Unit

Formation Constant T given Change in Drawdown: 0.804 Square Meter per Second --> 0.804 Square Meter per Second No Conversion Required
Total Drawdown in Well: 0.83 Meter --> 0.83 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_u = (4*pi*F_T*s_t)/Q --> (4*pi*0.804*0.83)/1.01

Evaluating ... ...

W_u = 8.30276281027145

STEP 3: Convert Result to Output's Unit

8.30276281027145 --> No Conversion Required

FINAL ANSWER

8.30276281027145 ≈ 8.302763 <-- Well Function of u

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Unsteady Flow » Well Function » Well Function given Drawdown

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Well Function Calculators

Well Function given Drawdown

LaTeX Go Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge

Well Function given Constant dependent on Well Function and Chow's Function

LaTeX Go Well Function of u = (2.303*Chow's Function)/exp(Well Function Constant)

Well Function given Chow's Function

LaTeX Go Well Function of u = Chow's Function*2.303

Well Function given Drawdown Formula

LaTeX Go

Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge
W_u = (4*pi*F_T*s_t)/Q

What is Drawdown?

Drawdown is a change in groundwater level due to an applied stress, caused by events such as: Pumping from a well. Pumping from a neighbouring well. Intensive water taking from local area.

How to Calculate Well Function given Drawdown?

Well Function given Drawdown calculator uses Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge to calculate the Well Function of u, Well Function given Drawdown formula is defined as a measure of the water level in a pumping well, describing the change in water level over time in response to pumping, and is used to analyze and predict groundwater flow in unsteady flow conditions. Well Function of u is denoted by W_u symbol.

How to calculate Well Function given Drawdown using this online calculator? To use this online calculator for Well Function given Drawdown, enter Formation Constant T given Change in Drawdown (F_T), Total Drawdown in Well (s_t) & Discharge (Q) and hit the calculate button. Here is how the Well Function given Drawdown calculation can be explained with given input values -> 8.302763 = (4*pi*0.804*0.83)/1.01.

FAQ

What is Well Function given Drawdown?

Well Function given Drawdown formula is defined as a measure of the water level in a pumping well, describing the change in water level over time in response to pumping, and is used to analyze and predict groundwater flow in unsteady flow conditions and is represented as W_u = (4*pi*F_T*s_t)/Q or Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge. Formation Constant T given Change in Drawdown is defined as the difference at the two wells, Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test & Discharge is the rate of flow of a fluid in unsteady flow.

How to calculate Well Function given Drawdown?

Well Function given Drawdown formula is defined as a measure of the water level in a pumping well, describing the change in water level over time in response to pumping, and is used to analyze and predict groundwater flow in unsteady flow conditions is calculated using Well Function of u = (4*pi*Formation Constant T given Change in Drawdown*Total Drawdown in Well)/Discharge. To calculate Well Function given Drawdown, you need Formation Constant T given Change in Drawdown (F_T), Total Drawdown in Well (s_t) & Discharge (Q). With our tool, you need to enter the respective value for Formation Constant T given Change in Drawdown, Total Drawdown in Well & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Well Function of u?

In this formula, Well Function of u uses Formation Constant T given Change in Drawdown, Total Drawdown in Well & Discharge. We can use 2 other way(s) to calculate the same, which is/are as follows -

Well Function of u = Chow's Function*2.303
Well Function of u = (2.303*Chow's Function)/exp(Well Function Constant)

Home

FREE PDFs

🔍 Search