Weight of Water Retained in Unit Area of Soil Calculator

✖The Dry unit weight of soil when the dry weight is reckoned with reference to the total original volume V, it is called the dry unit weight.ⓘ The Dry Unit Weight of Soil [Γ_d]			+10% -10%
✖Depth of root zone in meters is the depth within the soil profile that commodity crop (cc) roots can effectively extract water and nutrients for growth.ⓘ Depth of Root Zone in Meters [d_w]			+10% -10%
✖The field capacity of water remaining in a soil after it has been thoroughly saturated and allowed to drain freely, usually for one to two days.ⓘ The Field Capacity of Water [F]			+10% -10%

✖Unit Weight of Water is a volume-specific quantity defined as the weight per unit volume of a material.ⓘ Weight of Water Retained in Unit Area of Soil [Γ_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Irrigation Engineering Formula PDF PDF Image

Weight of Water Retained in Unit Area of Soil Solution

STEP 0: Pre-Calculation Summary

Formula Used

Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water)
Γ_w = (Γ_d)*(d_w)*(F)
This formula uses 4 Variables

Variables Used

Unit Weight of Water - (Measured in Kilonewton per Cubic Meter) - Unit Weight of Water is a volume-specific quantity defined as the weight per unit volume of a material.
The Dry Unit Weight of Soil - (Measured in Kilonewton per Cubic Meter) - The Dry unit weight of soil when the dry weight is reckoned with reference to the total original volume V, it is called the dry unit weight.
Depth of Root Zone in Meters - (Measured in Meter) - Depth of root zone in meters is the depth within the soil profile that commodity crop (cc) roots can effectively extract water and nutrients for growth.
The Field Capacity of Water - The field capacity of water remaining in a soil after it has been thoroughly saturated and allowed to drain freely, usually for one to two days.

STEP 1: Convert Input(s) to Base Unit

The Dry Unit Weight of Soil: 13.73 Kilonewton per Cubic Meter --> 13.73 Kilonewton per Cubic Meter No Conversion Required
Depth of Root Zone in Meters: 0.3 Meter --> 0.3 Meter No Conversion Required
The Field Capacity of Water: 0.3572 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Γ_w = (Γ_d)*(d_w)*(F) --> (13.73)*(0.3)*(0.3572)

Evaluating ... ...

Γ_w = 1.4713068

STEP 3: Convert Result to Output's Unit

1471.3068 Newton per Cubic Meter -->1.4713068 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

1.4713068 ≈ 1.471307 Kilonewton per Cubic Meter <-- Unit Weight of Water

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Irrigation Engineering » Soil Moisture Plant Relationships » Depth of Water Held by Soil in Root Zone » Weight of Water Retained in Unit Area of Soil

Credits

Created by bhuvaneshwari

Coorg institute of technology (CIT), Kodagu

bhuvaneshwari has created this Calculator and 50+ more calculators!

Verified by Ayush Singh

Gautam Buddha University (GBU), Greater Noida

Ayush Singh has verified this Calculator and 100+ more calculators!

< Depth of Water Held by Soil in Root Zone Calculators

Total Water Storage Capacity of Soil

LaTeX Go Total Water Storage Capacity of Soil = (The Dry Unit Weight of Soil)*(Root Zone Depth)*(The Field Capacity of Water)/Unit Weight of Water

Depth of Water Stored in Root Zone in Filling Soil up to Field Capacity

LaTeX Go Depth of Root Zone in Meters = (The Dry Unit Weight of Soil)*(Root Zone Depth)*(The Field Capacity of Water)/Unit Weight of Water

Weight of Water Retained in Unit Area of Soil

LaTeX Go Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water)

Field Capacity of Water

LaTeX Go The Field Capacity of Water = (Unit Weight of Water*Depth of Root Zone in Meters)/The Dry Unit Weight of Soil

Weight of Water Retained in Unit Area of Soil Formula

LaTeX Go

Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water)
Γ_w = (Γ_d)*(d_w)*(F)

How do you calculate Water Retained by Soil?

The water holding capacity of a soil is calculated by summing the capacity of each layer in the root zone.

What is the Unit Weight of Soil?

The unit weight, also known as the 'weight density', of a soil refers to its weight per cubic meter and is typically expressed as kilonewtons per cubic meter (KN/m3), or tons per cubic meter (t/m3)1.

How to Calculate Weight of Water Retained in Unit Area of Soil?

Weight of Water Retained in Unit Area of Soil calculator uses Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water) to calculate the Unit Weight of Water, The Weight of Water Retained in Unit Area of Soil formula is defined as it can process and hold considerable amounts of water. They can take in water and will keep doing so until they are full, or until the rate at which they can transmit water into and through the pores is exceeded. Unit Weight of Water is denoted by Γ_w symbol.

How to calculate Weight of Water Retained in Unit Area of Soil using this online calculator? To use this online calculator for Weight of Water Retained in Unit Area of Soil, enter The Dry Unit Weight of Soil (Γ_d), Depth of Root Zone in Meters (d_w) & The Field Capacity of Water (F) and hit the calculate button. Here is how the Weight of Water Retained in Unit Area of Soil calculation can be explained with given input values -> 0.001471 = (13730)*(0.3)*(0.3572).

FAQ

What is Weight of Water Retained in Unit Area of Soil?

The Weight of Water Retained in Unit Area of Soil formula is defined as it can process and hold considerable amounts of water. They can take in water and will keep doing so until they are full, or until the rate at which they can transmit water into and through the pores is exceeded and is represented as Γ_w = (Γ_d)*(d_w)*(F) or Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water). The Dry unit weight of soil when the dry weight is reckoned with reference to the total original volume V, it is called the dry unit weight, Depth of root zone in meters is the depth within the soil profile that commodity crop (cc) roots can effectively extract water and nutrients for growth & The field capacity of water remaining in a soil after it has been thoroughly saturated and allowed to drain freely, usually for one to two days.

How to calculate Weight of Water Retained in Unit Area of Soil?

The Weight of Water Retained in Unit Area of Soil formula is defined as it can process and hold considerable amounts of water. They can take in water and will keep doing so until they are full, or until the rate at which they can transmit water into and through the pores is exceeded is calculated using Unit Weight of Water = (The Dry Unit Weight of Soil)*(Depth of Root Zone in Meters)*(The Field Capacity of Water). To calculate Weight of Water Retained in Unit Area of Soil, you need The Dry Unit Weight of Soil (Γ_d), Depth of Root Zone in Meters (d_w) & The Field Capacity of Water (F). With our tool, you need to enter the respective value for The Dry Unit Weight of Soil, Depth of Root Zone in Meters & The Field Capacity of Water and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search