Weight of Load Given Quantity of Scrap Produced Calculator

✖Bank in Scraper is computed in terms of volume.ⓘ Bank in Scraper [B]			+10% -10%
✖Density of Material in Scraper Production is ratio of mass of material to its volume.ⓘ Density of Material in Scraper Production [ρ_m]			+10% -10%

✖Weight of Load Scrap is the weight of one wheel or axle.ⓘ Weight of Load Given Quantity of Scrap Produced [W_load]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Weight of Load Given Quantity of Scrap Produced Solution

STEP 0: Pre-Calculation Summary

Formula Used

Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production)
W_load = (B*ρ_m)
This formula uses 3 Variables

Variables Used

Weight of Load Scrap - (Measured in Kilogram) - Weight of Load Scrap is the weight of one wheel or axle.
Bank in Scraper - (Measured in Cubic Meter) - Bank in Scraper is computed in terms of volume.
Density of Material in Scraper Production - (Measured in Kilogram per Cubic Meter) - Density of Material in Scraper Production is ratio of mass of material to its volume.

STEP 1: Convert Input(s) to Base Unit

Bank in Scraper: 9.8 Cubic Meter --> 9.8 Cubic Meter No Conversion Required
Density of Material in Scraper Production: 1.1 Kilogram per Cubic Meter --> 1.1 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_load = (B*ρ_m) --> (9.8*1.1)

Evaluating ... ...

W_load = 10.78

STEP 3: Convert Result to Output's Unit

10.78 Kilogram --> No Conversion Required

FINAL ANSWER

10.78 Kilogram <-- Weight of Load Scrap

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Weight of Load Given Quantity of Scrap Produced

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Weight of Load Given Quantity of Scrap Produced Formula

LaTeX Go

Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production)
W_load = (B*ρ_m)

What is Scrap?

Scrap consists of recyclable materials left over from product manufacturing and consumption, such as parts of vehicles, building supplies, and surplus materials. Unlike waste, scrap has monetary value, especially recovered metals, and non-metallic materials are also recovered for recycling.

How to Calculate Weight of Load Given Quantity of Scrap Produced?

Weight of Load Given Quantity of Scrap Produced calculator uses Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production) to calculate the Weight of Load Scrap, The Weight of Load Given Quantity of Scrap Produced is defined as the weight of load when we have prior information of bank and density of material . Weight of Load Scrap is denoted by W_load symbol.

How to calculate Weight of Load Given Quantity of Scrap Produced using this online calculator? To use this online calculator for Weight of Load Given Quantity of Scrap Produced, enter Bank in Scraper (B) & Density of Material in Scraper Production (ρ_m) and hit the calculate button. Here is how the Weight of Load Given Quantity of Scrap Produced calculation can be explained with given input values -> 10.78 = (9.8*1.1).

FAQ

What is Weight of Load Given Quantity of Scrap Produced?

The Weight of Load Given Quantity of Scrap Produced is defined as the weight of load when we have prior information of bank and density of material and is represented as W_load = (B*ρ_m) or Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production). Bank in Scraper is computed in terms of volume & Density of Material in Scraper Production is ratio of mass of material to its volume.

How to calculate Weight of Load Given Quantity of Scrap Produced?

The Weight of Load Given Quantity of Scrap Produced is defined as the weight of load when we have prior information of bank and density of material is calculated using Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production). To calculate Weight of Load Given Quantity of Scrap Produced, you need Bank in Scraper (B) & Density of Material in Scraper Production (ρ_m). With our tool, you need to enter the respective value for Bank in Scraper & Density of Material in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search