Weight of Hammer given Allowable Load for Drop Hammer Driven Piles Calculator

✖Allowable Pile Load is the maximum load that a pile can safely support without experiencing unacceptable levels of settlement or failure.ⓘ Allowable Pile Load [P_a]			+10% -10%
✖Penetration per Blow is the measure of penetration of pile on each blow of hammer.ⓘ Penetration per Blow [p]			+10% -10%
✖Height of Drop is the vertical distance over which a drop hammer falls to compact soil or other materials in field compaction tests.ⓘ Height of Drop [H_d]			+10% -10%

✖Hammer Weight is the weight of the hammer used in dynamic pile driving.ⓘ Weight of Hammer given Allowable Load for Drop Hammer Driven Piles [W_h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Pile Foundations Formulas PDF PDF Image

Weight of Hammer given Allowable Load for Drop Hammer Driven Piles Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop)
W_h = (P_a*(p+1))/(2*H_d)
This formula uses 4 Variables

Variables Used

Hammer Weight - (Measured in Kilogram) - Hammer Weight is the weight of the hammer used in dynamic pile driving.
Allowable Pile Load - (Measured in Kilogram) - Allowable Pile Load is the maximum load that a pile can safely support without experiencing unacceptable levels of settlement or failure.
Penetration per Blow - (Measured in Meter) - Penetration per Blow is the measure of penetration of pile on each blow of hammer.
Height of Drop - (Measured in Meter) - Height of Drop is the vertical distance over which a drop hammer falls to compact soil or other materials in field compaction tests.

STEP 1: Convert Input(s) to Base Unit

Allowable Pile Load: 12.09 Kilogram --> 12.09 Kilogram No Conversion Required
Penetration per Blow: 2 Millimeter --> 0.002 Meter (Check conversion here)
Height of Drop: 0.3 Meter --> 0.3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_h = (P_a*(p+1))/(2*H_d) --> (12.09*(0.002+1))/(2*0.3)

Evaluating ... ...

W_h = 20.1903

STEP 3: Convert Result to Output's Unit

20.1903 Kilogram --> No Conversion Required

FINAL ANSWER

20.1903 Kilogram <-- Hammer Weight

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Pile Foundations » Allowable Load on Piles » Weight of Hammer given Allowable Load for Drop Hammer Driven Piles

Credits

Created by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has created this Calculator and 200+ more calculators!

Verified by Rudrani Tidke

Cummins College of Engineering for Women (CCEW), Pune

Rudrani Tidke has verified this Calculator and 50+ more calculators!

< Allowable Load on Piles Calculators

Weight of Hammer given Allowable Load for Steam Hammer Driven Piles

LaTeX Go Steam Hammer Weight = (Allowable Pile Load*(Penetration per Blow+0.1))/(2*Height of Drop)

Weight of Hammer given Allowable Load for Drop Hammer Driven Piles

LaTeX Go Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop)

Height of Drop given Allowable Load for Drop Hammer Driven Piles

LaTeX Go Height of Drop = (Allowable Pile Load*(Penetration per Blow+1))/(2*Hammer Weight)

Allowable Load for Drop Hammer Driven Piles

LaTeX Go Allowable Pile Load = (2*Hammer Weight*Height of Drop)/(Penetration per Blow+1)

Weight of Hammer given Allowable Load for Drop Hammer Driven Piles Formula

LaTeX Go

Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop)
W_h = (P_a*(p+1))/(2*H_d)

What is Drop Hammer?

With a gravity drop hammer, the upper die is attached to a ram and is raised by either a board, belt, or air. It is then allowed to fall freely to strike the workpiece or pile.

How to Calculate Weight of Hammer given Allowable Load for Drop Hammer Driven Piles?

Weight of Hammer given Allowable Load for Drop Hammer Driven Piles calculator uses Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop) to calculate the Hammer Weight, The Weight of Hammer given Allowable Load for Drop Hammer Driven Piles formula is defined as the value of weight of hammer when we have prior information of Allowable Load for Drop Hammer Driven Piles. Hammer Weight is denoted by W_h symbol.

How to calculate Weight of Hammer given Allowable Load for Drop Hammer Driven Piles using this online calculator? To use this online calculator for Weight of Hammer given Allowable Load for Drop Hammer Driven Piles, enter Allowable Pile Load (P_a), Penetration per Blow (p) & Height of Drop (H_d) and hit the calculate button. Here is how the Weight of Hammer given Allowable Load for Drop Hammer Driven Piles calculation can be explained with given input values -> 20.1903 = (12.09*(0.002+1))/(2*0.3).

FAQ

What is Weight of Hammer given Allowable Load for Drop Hammer Driven Piles?

The Weight of Hammer given Allowable Load for Drop Hammer Driven Piles formula is defined as the value of weight of hammer when we have prior information of Allowable Load for Drop Hammer Driven Piles and is represented as W_h = (P_a*(p+1))/(2*H_d) or Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop). Allowable Pile Load is the maximum load that a pile can safely support without experiencing unacceptable levels of settlement or failure, Penetration per Blow is the measure of penetration of pile on each blow of hammer & Height of Drop is the vertical distance over which a drop hammer falls to compact soil or other materials in field compaction tests.

How to calculate Weight of Hammer given Allowable Load for Drop Hammer Driven Piles?

The Weight of Hammer given Allowable Load for Drop Hammer Driven Piles formula is defined as the value of weight of hammer when we have prior information of Allowable Load for Drop Hammer Driven Piles is calculated using Hammer Weight = (Allowable Pile Load*(Penetration per Blow+1))/(2*Height of Drop). To calculate Weight of Hammer given Allowable Load for Drop Hammer Driven Piles, you need Allowable Pile Load (P_a), Penetration per Blow (p) & Height of Drop (H_d). With our tool, you need to enter the respective value for Allowable Pile Load, Penetration per Blow & Height of Drop and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search