Weight Lifted by Hydraulic Press given Length of Lever Calculator

✖Force Applied at End of Hydraulic Lever is defined as the push or pull upon an lever resulting from the lever's interaction with another object.ⓘ Force Applied at End of Hydraulic Lever [F']			+10% -10%
✖Length of Load Arm of Hydraulic Lever is the length of the arm of an hydraulic press or an hydraulic lever onto which the output load is balanced.ⓘ Length of Load Arm of Hydraulic Lever [L_a]			+10% -10%
✖Length of lever is defined as the perpendicular distance from a line of force to an axis through the fulcrum of hydraulic lever. These force is responsible for lifting the weights.ⓘ Length of Lever [l]			+10% -10%
✖Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid.ⓘ Area of Hydraulic Ram [A]			+10% -10%
✖Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press.ⓘ Area of Plunger of Hydraulic Press [a]			+10% -10%

✖Weight Lifted by Plunger is defined as the amount of load that is lifted by the plunger when a certain amount of force is acting on it.ⓘ Weight Lifted by Hydraulic Press given Length of Lever [W_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid Machinery Formula PDF PDF Image

Weight Lifted by Hydraulic Press given Length of Lever Solution

STEP 0: Pre-Calculation Summary

Formula Used

Weight Lifted by Plunger = Force Applied at End of Hydraulic Lever*Length of Load Arm of Hydraulic Lever/Length of Lever*Area of Hydraulic Ram/Area of Plunger of Hydraulic Press
W_p = F'*L_a/l*A/a
This formula uses 6 Variables

Variables Used

Weight Lifted by Plunger - (Measured in Newton) - Weight Lifted by Plunger is defined as the amount of load that is lifted by the plunger when a certain amount of force is acting on it.
Force Applied at End of Hydraulic Lever - (Measured in Newton) - Force Applied at End of Hydraulic Lever is defined as the push or pull upon an lever resulting from the lever's interaction with another object.
Length of Load Arm of Hydraulic Lever - (Measured in Meter) - Length of Load Arm of Hydraulic Lever is the length of the arm of an hydraulic press or an hydraulic lever onto which the output load is balanced.
Length of Lever - (Measured in Meter) - Length of lever is defined as the perpendicular distance from a line of force to an axis through the fulcrum of hydraulic lever. These force is responsible for lifting the weights.
Area of Hydraulic Ram - (Measured in Square Meter) - Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid.
Area of Plunger of Hydraulic Press - (Measured in Square Meter) - Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press.

STEP 1: Convert Input(s) to Base Unit

Force Applied at End of Hydraulic Lever: 45.66 Newton --> 45.66 Newton No Conversion Required
Length of Load Arm of Hydraulic Lever: 5.85 Meter --> 5.85 Meter No Conversion Required
Length of Lever: 8.2 Meter --> 8.2 Meter No Conversion Required
Area of Hydraulic Ram: 0.0154 Square Meter --> 0.0154 Square Meter No Conversion Required
Area of Plunger of Hydraulic Press: 0.000346 Square Meter --> 0.000346 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_p = F'*L_a/l*A/a --> 45.66*5.85/8.2*0.0154/0.000346

Evaluating ... ...

W_p = 1449.84823064994

STEP 3: Convert Result to Output's Unit

1449.84823064994 Newton --> No Conversion Required

FINAL ANSWER

1449.84823064994 ≈ 1449.848 Newton <-- Weight Lifted by Plunger

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Fluid Mechanics » Fluid Machinery » Hydraulic Machines » Mechanical » Hydraulic Press » Weight Lifted by Hydraulic Press given Length of Lever

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Hydraulic Press Calculators

Weight Lifted by Hydraulic Press

LaTeX Go Weight Lifted by Plunger = (Force on Hydraulic Press Plunger*Area of Hydraulic Ram)/Area of Plunger of Hydraulic Press

Force Acting on Hydraulic Plunger

LaTeX Go Force on Hydraulic Press Plunger = Weight Lifted by Plunger*Area of Plunger of Hydraulic Press/Area of Hydraulic Ram

Mechanical Advantage of Hydraulic Press given Weight and Force

LaTeX Go Mechanical Advantage of Hydraulic Press = Weight Lifted by Plunger/Force on Hydraulic Press Plunger

Mechanical Advantage of Hydraulic Press

LaTeX Go Mechanical Advantage of Hydraulic Press = Area of Hydraulic Ram/Area of Plunger of Hydraulic Press

Weight Lifted by Hydraulic Press given Length of Lever Formula

LaTeX Go

Weight Lifted by Plunger = Force Applied at End of Hydraulic Lever*Length of Load Arm of Hydraulic Lever/Length of Lever*Area of Hydraulic Ram/Area of Plunger of Hydraulic Press
W_p = F'*L_a/l*A/a

How is a hydraulic press so strong?

Pascal's Law in action. In a hydraulic press, a modest mechanical force (F1) is applied to a small area (A1). ... The user applies pressure by hand, using a handle to pump pressure into the hydraulic fluid system. This pressure is transferred to a secondary area and the resulting force can be as great as 25 tons.

How many pounds of force does a hydraulic press exert?

In case the pressure gauge reads 1000 PSI, the 1000 pounds per square inch is applied to 10 square inches. If every square inch of the surface area applies 1000 pounds of force, the 10 square inches will exert a total of 10,000 pounds of force.

How to Calculate Weight Lifted by Hydraulic Press given Length of Lever?

Weight Lifted by Hydraulic Press given Length of Lever calculator uses Weight Lifted by Plunger = Force Applied at End of Hydraulic Lever*Length of Load Arm of Hydraulic Lever/Length of Lever*Area of Hydraulic Ram/Area of Plunger of Hydraulic Press to calculate the Weight Lifted by Plunger, Weight Lifted by Hydraulic Press given Length of Lever formula is defined as a measure of the weight lifted by a hydraulic press in relation to the length of the lever, which is a critical component in hydraulic machines, and is essential in determining the mechanical advantage of the system. Weight Lifted by Plunger is denoted by W_p symbol.

How to calculate Weight Lifted by Hydraulic Press given Length of Lever using this online calculator? To use this online calculator for Weight Lifted by Hydraulic Press given Length of Lever, enter Force Applied at End of Hydraulic Lever (F'), Length of Load Arm of Hydraulic Lever (L_a), Length of Lever (l), Area of Hydraulic Ram (A) & Area of Plunger of Hydraulic Press (a) and hit the calculate button. Here is how the Weight Lifted by Hydraulic Press given Length of Lever calculation can be explained with given input values -> 1449.848 = 45.66*5.85/8.2*0.0154/0.000346.

FAQ

What is Weight Lifted by Hydraulic Press given Length of Lever?

Weight Lifted by Hydraulic Press given Length of Lever formula is defined as a measure of the weight lifted by a hydraulic press in relation to the length of the lever, which is a critical component in hydraulic machines, and is essential in determining the mechanical advantage of the system and is represented as W_p = F'*L_a/l*A/a or Weight Lifted by Plunger = Force Applied at End of Hydraulic Lever*Length of Load Arm of Hydraulic Lever/Length of Lever*Area of Hydraulic Ram/Area of Plunger of Hydraulic Press. Force Applied at End of Hydraulic Lever is defined as the push or pull upon an lever resulting from the lever's interaction with another object, Length of Load Arm of Hydraulic Lever is the length of the arm of an hydraulic press or an hydraulic lever onto which the output load is balanced, Length of lever is defined as the perpendicular distance from a line of force to an axis through the fulcrum of hydraulic lever. These force is responsible for lifting the weights, Area of hydraulic ram is defined as the area covered by the ram in which a piston or plunger is displaced by the pressure of a fluid & Area of Plunger of Hydraulic Press is the cross-sectional area of the plunger or the piston of an hydraulic press.

How to calculate Weight Lifted by Hydraulic Press given Length of Lever?

Weight Lifted by Hydraulic Press given Length of Lever formula is defined as a measure of the weight lifted by a hydraulic press in relation to the length of the lever, which is a critical component in hydraulic machines, and is essential in determining the mechanical advantage of the system is calculated using Weight Lifted by Plunger = Force Applied at End of Hydraulic Lever*Length of Load Arm of Hydraulic Lever/Length of Lever*Area of Hydraulic Ram/Area of Plunger of Hydraulic Press. To calculate Weight Lifted by Hydraulic Press given Length of Lever, you need Force Applied at End of Hydraulic Lever (F'), Length of Load Arm of Hydraulic Lever (L_a), Length of Lever (l), Area of Hydraulic Ram (A) & Area of Plunger of Hydraulic Press (a). With our tool, you need to enter the respective value for Force Applied at End of Hydraulic Lever, Length of Load Arm of Hydraulic Lever, Length of Lever, Area of Hydraulic Ram & Area of Plunger of Hydraulic Press and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Weight Lifted by Plunger?

In this formula, Weight Lifted by Plunger uses Force Applied at End of Hydraulic Lever, Length of Load Arm of Hydraulic Lever, Length of Lever, Area of Hydraulic Ram & Area of Plunger of Hydraulic Press. We can use 1 other way(s) to calculate the same, which is/are as follows -

Weight Lifted by Plunger = (Force on Hydraulic Press Plunger*Area of Hydraulic Ram)/Area of Plunger of Hydraulic Press

Home

FREE PDFs

🔍 Search