Wavelength for Total Wave Energy in Wavelength per unit Crest Width Calculator

✖Total Energy of Wave per Width is the sum of its kinetic energy and its potential energy.ⓘ Total Energy of Wave per Width [TE]			+10% -10%
✖Density of Fluid is the mass of fluid per unit volume of the fluid.ⓘ Density of Fluid [ρ]			+10% -10%
✖Wave Height of a surface wave is the difference between the elevations of a crest and a neighboring trough.ⓘ Wave Height [H]			+10% -10%

✖Wavelength refers to the distance between successive crests or troughs of a wave.ⓘ Wavelength for Total Wave Energy in Wavelength per unit Crest Width [λ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Wave Energy Formulas PDF PDF Image

Wavelength for Total Wave Energy in Wavelength per unit Crest Width Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wavelength = (8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wave Height^2)
λ = (8*TE)/(ρ*[g]*H^2)
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Wavelength - (Measured in Meter) - Wavelength refers to the distance between successive crests or troughs of a wave.
Total Energy of Wave per Width - (Measured in Joule per Meter) - Total Energy of Wave per Width is the sum of its kinetic energy and its potential energy.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is the mass of fluid per unit volume of the fluid.
Wave Height - (Measured in Meter) - Wave Height of a surface wave is the difference between the elevations of a crest and a neighboring trough.

STEP 1: Convert Input(s) to Base Unit

Total Energy of Wave per Width: 20.26 Joule per Meter --> 20.26 Joule per Meter No Conversion Required
Density of Fluid: 1.225 Kilogram per Cubic Meter --> 1.225 Kilogram per Cubic Meter No Conversion Required
Wave Height: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

λ = (8*TE)/(ρ*[g]*H^2) --> (8*20.26)/(1.225*[g]*3^2)

Evaluating ... ...

λ = 1.49909844716066

STEP 3: Convert Result to Output's Unit

1.49909844716066 Meter --> No Conversion Required

FINAL ANSWER

1.49909844716066 ≈ 1.499098 Meter <-- Wavelength

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Water Wave Mechanics » Wave Energy » Wavelength for Total Wave Energy in Wavelength per unit Crest Width

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Wave Energy Calculators

Wave Height given Total Wave Energy in one Wavelength per unit Crest Width

LaTeX Go Wave Height = sqrt((8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wavelength))

Total Wave Energy in one Wavelength per unit Crest Width

LaTeX Go Total Energy of Wave per Width = (Density of Fluid*[g]*Wave Height^2*Wavelength)/8

Total Wave Energy given Kinetic Energy and Potential Energy

LaTeX Go Total Energy of Wave per Width = Kinetic Energy of Wave per Unit Width+Potential Energy per Unit Width

Potential Energy given Total Wave Energy

LaTeX Go Potential Energy per Unit Width = Total Energy of Wave per Width-Kinetic Energy of Wave per Unit Width

Wavelength for Total Wave Energy in Wavelength per unit Crest Width Formula

LaTeX Go

Wavelength = (8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wave Height^2)
λ = (8*TE)/(ρ*[g]*H^2)

What type of energy is Wave Energy?

Wave Energy is an indirect form of wind energy that causes movement of the water on the surface of the oceans and by capturing this energy the motion of the waves is converted to mechanical energy and used to drive an electricity generator.

How to Calculate Wavelength for Total Wave Energy in Wavelength per unit Crest Width?

Wavelength for Total Wave Energy in Wavelength per unit Crest Width calculator uses Wavelength = (8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wave Height^2) to calculate the Wavelength, The Wavelength for Total Wave Energy in Wavelength per unit Crest Width formula is defined as the distance between two successive crests or troughs of a wave. Wavelength is denoted by λ symbol.

How to calculate Wavelength for Total Wave Energy in Wavelength per unit Crest Width using this online calculator? To use this online calculator for Wavelength for Total Wave Energy in Wavelength per unit Crest Width, enter Total Energy of Wave per Width (TE), Density of Fluid (ρ) & Wave Height (H) and hit the calculate button. Here is how the Wavelength for Total Wave Energy in Wavelength per unit Crest Width calculation can be explained with given input values -> 1.499098 = (8*20.26)/(1.225*[g]*3^2).

FAQ

What is Wavelength for Total Wave Energy in Wavelength per unit Crest Width?

The Wavelength for Total Wave Energy in Wavelength per unit Crest Width formula is defined as the distance between two successive crests or troughs of a wave and is represented as λ = (8*TE)/(ρ*[g]*H^2) or Wavelength = (8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wave Height^2). Total Energy of Wave per Width is the sum of its kinetic energy and its potential energy, Density of Fluid is the mass of fluid per unit volume of the fluid & Wave Height of a surface wave is the difference between the elevations of a crest and a neighboring trough.

How to calculate Wavelength for Total Wave Energy in Wavelength per unit Crest Width?

The Wavelength for Total Wave Energy in Wavelength per unit Crest Width formula is defined as the distance between two successive crests or troughs of a wave is calculated using Wavelength = (8*Total Energy of Wave per Width)/(Density of Fluid*[g]*Wave Height^2). To calculate Wavelength for Total Wave Energy in Wavelength per unit Crest Width, you need Total Energy of Wave per Width (TE), Density of Fluid (ρ) & Wave Height (H). With our tool, you need to enter the respective value for Total Energy of Wave per Width, Density of Fluid & Wave Height and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search