Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition Calculator

✖Horizontal Semi-axis of Water Particle refers to the horizontal component of the oscillation of water particles caused by waves or other hydrodynamic forces in coastal and engineering.ⓘ Horizontal Semi-axis of Water Particle [A]			+10% -10%
✖Water Depth for Semi-Axis of Ellipse is the depth of water from the bed of sea for semi-axis of ellipse.ⓘ Water Depth for Semi-Axis of Ellipse [d_s]			+10% -10%
✖Length of Water Wave is the horizontal distance between corresponding points on two successive waves.ⓘ Length of Water Wave [L]			+10% -10%

✖Height of the Wave is the difference between the elevations of a crest and a neighboring trough.ⓘ Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition [H_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Horizontal and Vertical Semi Axis of Ellipse Formulas PDF PDF Image

Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition Solution

STEP 0: Pre-Calculation Summary

Formula Used

Height of the Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave
H_w = (4*A*pi*d_s)/L
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Height of the Wave - (Measured in Meter) - Height of the Wave is the difference between the elevations of a crest and a neighboring trough.
Horizontal Semi-axis of Water Particle - Horizontal Semi-axis of Water Particle refers to the horizontal component of the oscillation of water particles caused by waves or other hydrodynamic forces in coastal and engineering.
Water Depth for Semi-Axis of Ellipse - (Measured in Meter) - Water Depth for Semi-Axis of Ellipse is the depth of water from the bed of sea for semi-axis of ellipse.
Length of Water Wave - (Measured in Meter) - Length of Water Wave is the horizontal distance between corresponding points on two successive waves.

STEP 1: Convert Input(s) to Base Unit

Horizontal Semi-axis of Water Particle: 7.4021 --> No Conversion Required
Water Depth for Semi-Axis of Ellipse: 13.5 Meter --> 13.5 Meter No Conversion Required
Length of Water Wave: 90 Meter --> 90 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_w = (4*A*pi*d_s)/L --> (4*7.4021*pi*13.5)/90

Evaluating ... ...

H_w = 13.9526297886822

STEP 3: Convert Result to Output's Unit

13.9526297886822 Meter --> No Conversion Required

FINAL ANSWER

13.9526297886822 ≈ 13.95263 Meter <-- Height of the Wave

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Water Wave Mechanics » Horizontal and Vertical Semi Axis of Ellipse » Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Horizontal and Vertical Semi Axis of Ellipse Calculators

Major Horizontal Semi Axis for Deep Water Condition

LaTeX Go Horizontal Semi-axis of Water Particle = (Height of the Wave/2)*exp(2*pi*Sea Bed Elevation/Length of Water Wave)

Major Horizontal Semi Axis for Shallow Water Condition

LaTeX Go Horizontal Semi-axis of Water Particle = (Height of the Wave/2)*(Length of Water Wave/(2*pi*Water Depth for Semi-Axis of Ellipse))

Minor Vertical Semi-Axis for Deep Water Condition

LaTeX Go Vertical Semi-Axis = (Height of the Wave/2)*exp(2*pi*Sea Bed Elevation/Length of Water Wave)

Minor Vertical Semi Axis for Shallow Water Condition

LaTeX Go Vertical Semi-Axis = (Height of the Wave/2)*(1+Sea Bed Elevation/Water Depth for Semi-Axis of Ellipse)

Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition Formula

LaTeX Go

Height of the Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave
H_w = (4*A*pi*d_s)/L

How Does Depth Affect Wavelength?

The change from deep to shallow water waves occurs when the depth of the water, d, becomes less than one half of the wavelength of the wave, λ. The speed of deep-water waves depends on the wavelength of the waves. We say that deep-water waves show dispersion. A wave with a longer wavelength travels at higher speed.

What is Shallow water conditions?

The shallow-water equations describe a thin layer of fluid of constant density in hydrostatic balance, bounded from below by the bottom topography and from above by a free surface. They exhibit a rich variety of features, because they have infinitely many conservation laws.

How to Calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?

Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition calculator uses Height of the Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave to calculate the Height of the Wave, The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition formula is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water. Height of the Wave is denoted by H_w symbol.

How to calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition using this online calculator? To use this online calculator for Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition, enter Horizontal Semi-axis of Water Particle (A), Water Depth for Semi-Axis of Ellipse (d_s) & Length of Water Wave (L) and hit the calculate button. Here is how the Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition calculation can be explained with given input values -> 13.95263 = (4*7.4021*pi*13.5)/90.

FAQ

What is Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?

The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition formula is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water and is represented as H_w = (4*A*pi*d_s)/L or Height of the Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave. Horizontal Semi-axis of Water Particle refers to the horizontal component of the oscillation of water particles caused by waves or other hydrodynamic forces in coastal and engineering, Water Depth for Semi-Axis of Ellipse is the depth of water from the bed of sea for semi-axis of ellipse & Length of Water Wave is the horizontal distance between corresponding points on two successive waves.

How to calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition?

The Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition formula is defined as the difference between the elevations of a crest and a neighboring trough, when we have information about major horizontal semi axis for shallow water is calculated using Height of the Wave = (4*Horizontal Semi-axis of Water Particle*pi*Water Depth for Semi-Axis of Ellipse)/Length of Water Wave. To calculate Wave Height for Major Horizontal Semi-Axis for Shallow Water Condition, you need Horizontal Semi-axis of Water Particle (A), Water Depth for Semi-Axis of Ellipse (d_s) & Length of Water Wave (L). With our tool, you need to enter the respective value for Horizontal Semi-axis of Water Particle, Water Depth for Semi-Axis of Ellipse & Length of Water Wave and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Height of the Wave?

In this formula, Height of the Wave uses Horizontal Semi-axis of Water Particle, Water Depth for Semi-Axis of Ellipse & Length of Water Wave. We can use 3 other way(s) to calculate the same, which is/are as follows -

Height of the Wave = (2*Vertical Semi-Axis)/(1+(Sea Bed Elevation/Water Depth for Semi-Axis of Ellipse))
Height of the Wave = (2*Horizontal Semi-axis of Water Particle)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)
Height of the Wave = (2*Vertical Semi-Axis)/exp(2*pi*Sea Bed Elevation/Length of Water Wave)

Home

FREE PDFs

🔍 Search