Wave Amplitude given Elevation of Water Surface Relative to SWL Solution

STEP 0: Pre-Calculation Summary
Formula Used
Wave Amplitude = Elevation of Water Surface/cos(Theta)
a = η/cos(θ)
This formula uses 1 Functions, 3 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Wave Amplitude - (Measured in Meter) - Wave Amplitude is a measurement of the vertical distance of the wave from the average.
Elevation of Water Surface - (Measured in Meter) - Elevation of Water Surface relative to the SWL, Standing Water Level recorded for the water well.
Theta - (Measured in Radian) - Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
STEP 1: Convert Input(s) to Base Unit
Elevation of Water Surface: 0.18 Meter --> 0.18 Meter No Conversion Required
Theta: 30 Degree --> 0.5235987755982 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = η/cos(θ) --> 0.18/cos(0.5235987755982)
Evaluating ... ...
a = 0.207846096908265
STEP 3: Convert Result to Output's Unit
0.207846096908265 Meter --> No Conversion Required
FINAL ANSWER
0.207846096908265 0.207846 Meter <-- Wave Amplitude
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Wave Parameters Calculators

Phase Velocity or Wave Celerity
​ LaTeX ​ Go Celerity of the Wave = Wavelength/Wave Period
Angular of Radian Frequency of Wave
​ LaTeX ​ Go Wave Angular Frequency = 2*pi/Wave Period
Wave number given wavelength
​ LaTeX ​ Go Wave Number = 2*pi/Wavelength
Wave Amplitude
​ LaTeX ​ Go Wave Amplitude = Wave Height/2

Wave Amplitude given Elevation of Water Surface Relative to SWL Formula

​LaTeX ​Go
Wave Amplitude = Elevation of Water Surface/cos(Theta)
a = η/cos(θ)

What is Wavelength?

Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space

How to Calculate Wave Amplitude given Elevation of Water Surface Relative to SWL?

Wave Amplitude given Elevation of Water Surface Relative to SWL calculator uses Wave Amplitude = Elevation of Water Surface/cos(Theta) to calculate the Wave Amplitude, The Wave Amplitude given Elevation of Water Surface Relative to SWL formula is defined as the maximum displacement or distance moved by point on vibrating body or wave measured from its equilibrium position. Wave Amplitude is denoted by a symbol.

How to calculate Wave Amplitude given Elevation of Water Surface Relative to SWL using this online calculator? To use this online calculator for Wave Amplitude given Elevation of Water Surface Relative to SWL, enter Elevation of Water Surface (η) & Theta (θ) and hit the calculate button. Here is how the Wave Amplitude given Elevation of Water Surface Relative to SWL calculation can be explained with given input values -> 0.207846 = 0.18/cos(0.5235987755982).

FAQ

What is Wave Amplitude given Elevation of Water Surface Relative to SWL?
The Wave Amplitude given Elevation of Water Surface Relative to SWL formula is defined as the maximum displacement or distance moved by point on vibrating body or wave measured from its equilibrium position and is represented as a = η/cos(θ) or Wave Amplitude = Elevation of Water Surface/cos(Theta). Elevation of Water Surface relative to the SWL, Standing Water Level recorded for the water well & Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
How to calculate Wave Amplitude given Elevation of Water Surface Relative to SWL?
The Wave Amplitude given Elevation of Water Surface Relative to SWL formula is defined as the maximum displacement or distance moved by point on vibrating body or wave measured from its equilibrium position is calculated using Wave Amplitude = Elevation of Water Surface/cos(Theta). To calculate Wave Amplitude given Elevation of Water Surface Relative to SWL, you need Elevation of Water Surface (η) & Theta (θ). With our tool, you need to enter the respective value for Elevation of Water Surface & Theta and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Wave Amplitude?
In this formula, Wave Amplitude uses Elevation of Water Surface & Theta. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Wave Amplitude = Wave Height/2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!