Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius Calculator

✖The Outer Radius of Hollow Cylinder is the distance between the center and any point on the circumference of outer cylinder of the Hollow Cylinder.ⓘ Outer Radius of Hollow Cylinder [r_Outer]			+10% -10%
✖The Total Curved Surface Area of Hollow Cylinder is defined as the area of only curved surface, leaving the circular top and base.ⓘ Total Curved Surface Area of Hollow Cylinder [CSA_Total]			+10% -10%
✖Height of Hollow Cylinder is the maximum vertical distance from the bottom to top of the Hollow Cylinder.ⓘ Height of Hollow Cylinder [h]			+10% -10%

✖The Wall Thickness of Hollow Cylinder refers to the measure of the distance between the inner and outer surfaces of the Hollow Cylinder.ⓘ Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius [t_Wall]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hollow Cylinder Formula PDF PDF Image

Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius Solution

STEP 0: Pre-Calculation Summary

Formula Used

Wall Thickness of Hollow Cylinder = (2*Outer Radius of Hollow Cylinder)-Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder)
t_Wall = (2*r_Outer)-CSA_Total/(2*pi*h)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Wall Thickness of Hollow Cylinder - (Measured in Meter) - The Wall Thickness of Hollow Cylinder refers to the measure of the distance between the inner and outer surfaces of the Hollow Cylinder.
Outer Radius of Hollow Cylinder - (Measured in Meter) - The Outer Radius of Hollow Cylinder is the distance between the center and any point on the circumference of outer cylinder of the Hollow Cylinder.
Total Curved Surface Area of Hollow Cylinder - (Measured in Square Meter) - The Total Curved Surface Area of Hollow Cylinder is defined as the area of only curved surface, leaving the circular top and base.
Height of Hollow Cylinder - (Measured in Meter) - Height of Hollow Cylinder is the maximum vertical distance from the bottom to top of the Hollow Cylinder.

STEP 1: Convert Input(s) to Base Unit

Outer Radius of Hollow Cylinder: 10 Meter --> 10 Meter No Conversion Required
Total Curved Surface Area of Hollow Cylinder: 800 Square Meter --> 800 Square Meter No Conversion Required
Height of Hollow Cylinder: 8 Meter --> 8 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_Wall = (2*r_Outer)-CSA_Total/(2*pi*h) --> (2*10)-800/(2*pi*8)

Evaluating ... ...

t_Wall = 4.08450569081047

STEP 3: Convert Result to Output's Unit

4.08450569081047 Meter --> No Conversion Required

FINAL ANSWER

4.08450569081047 ≈ 4.084506 Meter <-- Wall Thickness of Hollow Cylinder

(Calculation completed in 00.020 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Hollow Cylinder » Wall Thickness of Hollow Cylinder » Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius

Credits

Created by Nayana Phulphagar

Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI

Nayana Phulphagar has created this Calculator and 300+ more calculators!

Verified by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has verified this Calculator and 400+ more calculators!

< Wall Thickness of Hollow Cylinder Calculators

Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Inner Radius

LaTeX Go Wall Thickness of Hollow Cylinder = Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder)-(2*Inner Radius of Hollow Cylinder)

Wall Thickness of Hollow Cylinder given Outer Curved Surface Area

LaTeX Go Wall Thickness of Hollow Cylinder = (Outer Curved Surface Area of Hollow Cylinder)/(2*pi*Height of Hollow Cylinder)-Inner Radius of Hollow Cylinder

Wall Thickness of Hollow Cylinder given Inner Curved Surface Area

LaTeX Go Wall Thickness of Hollow Cylinder = Outer Radius of Hollow Cylinder-(Inner Curved Surface Area of Hollow Cylinder)/(2*pi*Height of Hollow Cylinder)

Wall Thickness of Hollow Cylinder

LaTeX Go Wall Thickness of Hollow Cylinder = Outer Radius of Hollow Cylinder-Inner Radius of Hollow Cylinder

Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius Formula

LaTeX Go

Wall Thickness of Hollow Cylinder = (2*Outer Radius of Hollow Cylinder)-Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder)
t_Wall = (2*r_Outer)-CSA_Total/(2*pi*h)

What is Hollow Cylinder?

The Hollow Cylinder is defined as a cylinder, which is empty from inside and has some difference between the internal and external radius. The bottom of the hollow cylinder looks like an annular ring. In other words, the bottom of the hollow cylinder resembles a region bounded by two concentric circles.

What is Cylinder?

A Cylinder is a three-dimensional solid that holds two parallel bases joined by a curved surface, at a fixed distance. A cylinder is a three-dimensional shape consisting of two parallel circular bases, joined by a curved surface. The bases are always congruent and parallel. f the bases are circular in shape, then it is called a right circular cylinder. If the bases are in an elliptical shape, then it is called an “Elliptical Cylinder”.

How to Calculate Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius?

Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius calculator uses Wall Thickness of Hollow Cylinder = (2*Outer Radius of Hollow Cylinder)-Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder) to calculate the Wall Thickness of Hollow Cylinder, The Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius formula is defined as the measure of the distance between the inner and outer surfaces of the Hollow Cylinder, calculated using the total curved surface area and the outer radius of the Hollow Cylinder. Wall Thickness of Hollow Cylinder is denoted by t_Wall symbol.

How to calculate Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius using this online calculator? To use this online calculator for Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius, enter Outer Radius of Hollow Cylinder (r_Outer), Total Curved Surface Area of Hollow Cylinder (CSA_Total) & Height of Hollow Cylinder (h) and hit the calculate button. Here is how the Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius calculation can be explained with given input values -> 4.084506 = (2*10)-800/(2*pi*8).

FAQ

What is Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius?

The Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius formula is defined as the measure of the distance between the inner and outer surfaces of the Hollow Cylinder, calculated using the total curved surface area and the outer radius of the Hollow Cylinder and is represented as t_Wall = (2*r_Outer)-CSA_Total/(2*pi*h) or Wall Thickness of Hollow Cylinder = (2*Outer Radius of Hollow Cylinder)-Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder). The Outer Radius of Hollow Cylinder is the distance between the center and any point on the circumference of outer cylinder of the Hollow Cylinder, The Total Curved Surface Area of Hollow Cylinder is defined as the area of only curved surface, leaving the circular top and base & Height of Hollow Cylinder is the maximum vertical distance from the bottom to top of the Hollow Cylinder.

How to calculate Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius?

The Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius formula is defined as the measure of the distance between the inner and outer surfaces of the Hollow Cylinder, calculated using the total curved surface area and the outer radius of the Hollow Cylinder is calculated using Wall Thickness of Hollow Cylinder = (2*Outer Radius of Hollow Cylinder)-Total Curved Surface Area of Hollow Cylinder/(2*pi*Height of Hollow Cylinder). To calculate Wall Thickness of Hollow Cylinder given Total Curved Surface Area and Outer Radius, you need Outer Radius of Hollow Cylinder (r_Outer), Total Curved Surface Area of Hollow Cylinder (CSA_Total) & Height of Hollow Cylinder (h). With our tool, you need to enter the respective value for Outer Radius of Hollow Cylinder, Total Curved Surface Area of Hollow Cylinder & Height of Hollow Cylinder and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Wall Thickness of Hollow Cylinder?

In this formula, Wall Thickness of Hollow Cylinder uses Outer Radius of Hollow Cylinder, Total Curved Surface Area of Hollow Cylinder & Height of Hollow Cylinder. We can use 3 other way(s) to calculate the same, which is/are as follows -

Wall Thickness of Hollow Cylinder = Outer Radius of Hollow Cylinder-Inner Radius of Hollow Cylinder
Wall Thickness of Hollow Cylinder = (Outer Curved Surface Area of Hollow Cylinder)/(2*pi*Height of Hollow Cylinder)-Inner Radius of Hollow Cylinder
Wall Thickness of Hollow Cylinder = Outer Radius of Hollow Cylinder-(Inner Curved Surface Area of Hollow Cylinder)/(2*pi*Height of Hollow Cylinder)

Home

FREE PDFs

🔍 Search