Volumetric Flow Rate of Rectangular Notch Calculator

✖Thickness of Dam is the measurement or extent of dam from side to side.ⓘ Thickness of Dam [b]			+10% -10%
✖Head of Water Above Sill of Notch is defined as the discharge over notch that is measured by measuring the head acting over the notch.ⓘ Head of Water Above Sill of Notch [H]			+10% -10%
✖Head is defined as the height of water columns.ⓘ Head [H_w]			+10% -10%

✖Volumetric Flow Rate is the volume of fluid which passes per unit time.ⓘ Volumetric Flow Rate of Rectangular Notch [V_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Fluid in Motion Formulas PDF PDF Image

Volumetric Flow Rate of Rectangular Notch Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head)
V_f = 0.62*b*H*2/3*sqrt(2*[g]*H_w)
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Volumetric Flow Rate - (Measured in Cubic Meter per Second) - Volumetric Flow Rate is the volume of fluid which passes per unit time.
Thickness of Dam - (Measured in Meter) - Thickness of Dam is the measurement or extent of dam from side to side.
Head of Water Above Sill of Notch - (Measured in Meter) - Head of Water Above Sill of Notch is defined as the discharge over notch that is measured by measuring the head acting over the notch.
Head - (Measured in Meter) - Head is defined as the height of water columns.

STEP 1: Convert Input(s) to Base Unit

Thickness of Dam: 3.88 Meter --> 3.88 Meter No Conversion Required
Head of Water Above Sill of Notch: 2.6457 Meter --> 2.6457 Meter No Conversion Required
Head: 2.55 Meter --> 2.55 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_f = 0.62*b*H*2/3*sqrt(2*[g]*H_w) --> 0.62*3.88*2.6457*2/3*sqrt(2*[g]*2.55)

Evaluating ... ...

V_f = 30.0066960528816

STEP 3: Convert Result to Output's Unit

30.0066960528816 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

30.0066960528816 ≈ 30.0067 Cubic Meter per Second <-- Volumetric Flow Rate

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Fluid in Motion » Flow Rate » Volumetric Flow Rate of Rectangular Notch

Credits

Created by Shareef Alex

velagapudi ramakrishna siddhartha engineering college (vr siddhartha engineering college), vijayawada

Shareef Alex has created this Calculator and 100+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Flow Rate Calculators

Volumetric Flow Rate of Rectangular Notch

LaTeX Go Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head)

Volumetric Flow Rate at Vena Contracta

LaTeX Go Volumetric Flow Rate = Coefficient of Discharge*Area of Jet at Vena Contracta*sqrt(2*[g]*Head)

Volumetric Flow Rate of Circular Orifice

LaTeX Go Volumetric Flow Rate = 0.62*Area of Orifice*sqrt(2*[g]*Head)

Volumetric Flow Rate of Triangular Right Angled Notch

LaTeX Go Volumetric Flow Rate = 2.635*Head of Water Above Sill of Notch^(5/2)

Volumetric Flow Rate of Rectangular Notch Formula

LaTeX Go

Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head)
V_f = 0.62*b*H*2/3*sqrt(2*[g]*H_w)

What is rectangular notch?

It may be defined as an opening in the side of a tank or vessel such as liquid surface in the tank is below the level of opening. ... The edges of the notch are bevelled on the downstream side so as to have a sharp-edged sides and crest resulting in minimum contact with the flowing fluid.

What is standard volumetric flow?

Standard volumetric flow rates denote volumetric flow rates of gas corrected to standardised properties of temperature, pressure and relative humidity. Its use is common across engineering and allows a direct comparison to be made between gaseous flows in a manner identical to comparing their mass flow rates.

How to Calculate Volumetric Flow Rate of Rectangular Notch?

Volumetric Flow Rate of Rectangular Notch calculator uses Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head) to calculate the Volumetric Flow Rate, The Volumetric flow rate of rectangular notch formula is defined as the volume of fluid which passes per unit time through the rectangular notch. Volumetric Flow Rate is denoted by V_f symbol.

How to calculate Volumetric Flow Rate of Rectangular Notch using this online calculator? To use this online calculator for Volumetric Flow Rate of Rectangular Notch, enter Thickness of Dam (b), Head of Water Above Sill of Notch (H) & Head (H_w) and hit the calculate button. Here is how the Volumetric Flow Rate of Rectangular Notch calculation can be explained with given input values -> 30.0067 = 0.62*3.88*2.6457*2/3*sqrt(2*[g]*2.55).

FAQ

What is Volumetric Flow Rate of Rectangular Notch?

The Volumetric flow rate of rectangular notch formula is defined as the volume of fluid which passes per unit time through the rectangular notch and is represented as V_f = 0.62*b*H*2/3*sqrt(2*[g]*H_w) or Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head). Thickness of Dam is the measurement or extent of dam from side to side, Head of Water Above Sill of Notch is defined as the discharge over notch that is measured by measuring the head acting over the notch & Head is defined as the height of water columns.

How to calculate Volumetric Flow Rate of Rectangular Notch?

The Volumetric flow rate of rectangular notch formula is defined as the volume of fluid which passes per unit time through the rectangular notch is calculated using Volumetric Flow Rate = 0.62*Thickness of Dam*Head of Water Above Sill of Notch*2/3*sqrt(2*[g]*Head). To calculate Volumetric Flow Rate of Rectangular Notch, you need Thickness of Dam (b), Head of Water Above Sill of Notch (H) & Head (H_w). With our tool, you need to enter the respective value for Thickness of Dam, Head of Water Above Sill of Notch & Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Volumetric Flow Rate?

In this formula, Volumetric Flow Rate uses Thickness of Dam, Head of Water Above Sill of Notch & Head. We can use 3 other way(s) to calculate the same, which is/are as follows -

Volumetric Flow Rate = Coefficient of Discharge*Area of Jet at Vena Contracta*sqrt(2*[g]*Head)
Volumetric Flow Rate = 0.62*Area of Orifice*sqrt(2*[g]*Head)
Volumetric Flow Rate = 2.635*Head of Water Above Sill of Notch^(5/2)

Home

FREE PDFs

🔍 Search