Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method Calculator

✖Cross-Sectional Area at Point 1 is defined as the area of the section at point 1.ⓘ Cross-Sectional Area at Point 1 [A₁]			+10% -10%
✖Cross-Sectional Area at Point 2 is the area of cross section at a point 2.ⓘ Cross-Sectional Area at Point 2 [A₂]			+10% -10%
✖Change in Head Between the Points refers to the difference in the hydraulic head at two different points in a fluid system separated by a small distance dl.ⓘ Change in Head Between the Points [ΔH]			+10% -10%

✖Volume of Sediment Deposit is the deposited sediment volume between two consecutive heights h1 and h2 above the new datum.ⓘ Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method [ΔV_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Prediction of Sediment Distribution Formulas PDF PDF Image

Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2)
ΔV_s = (A₁+A₂)*(ΔH/2)
This formula uses 4 Variables

Variables Used

Volume of Sediment Deposit - (Measured in Cubic Meter) - Volume of Sediment Deposit is the deposited sediment volume between two consecutive heights h1 and h2 above the new datum.
Cross-Sectional Area at Point 1 - (Measured in Square Meter) - Cross-Sectional Area at Point 1 is defined as the area of the section at point 1.
Cross-Sectional Area at Point 2 - (Measured in Square Meter) - Cross-Sectional Area at Point 2 is the area of cross section at a point 2.
Change in Head Between the Points - (Measured in Meter) - Change in Head Between the Points refers to the difference in the hydraulic head at two different points in a fluid system separated by a small distance dl.

STEP 1: Convert Input(s) to Base Unit

Cross-Sectional Area at Point 1: 14 Square Meter --> 14 Square Meter No Conversion Required
Cross-Sectional Area at Point 2: 6 Square Meter --> 6 Square Meter No Conversion Required
Change in Head Between the Points: 0.5 Meter --> 0.5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ΔV_s = (A₁+A₂)*(ΔH/2) --> (14+6)*(0.5/2)

Evaluating ... ...

ΔV_s = 5

STEP 3: Convert Result to Output's Unit

5 Cubic Meter --> No Conversion Required

FINAL ANSWER

5 Cubic Meter <-- Volume of Sediment Deposit

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Prediction of Sediment Distribution » Empirical Area Reduction Method » Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Empirical Area Reduction Method Calculators

Relative Area for Different Type Classification of Reservoir

LaTeX Go Dimensionless Relative Area = Coefficient c*(Relative Depth^Coefficient m1)*(1-Relative Depth)^Coefficient n1

New Total Depth of Reservoir

LaTeX Go New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed

Difference in Elevations of Full Reservoir Level and Original Bed of Reservoir

LaTeX Go Difference in the Elevation (FRL and Original bed) = Height above Bed/Relative Depth

Relative Depth at New Zero Elevation

LaTeX Go Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)

Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method Formula

LaTeX Go

Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2)
ΔV_s = (A₁+A₂)*(ΔH/2)

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method?

Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method calculator uses Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2) to calculate the Volume of Sediment Deposit, The Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method formula is defined as the volume of sediment deposited between two consecutive heights above the new datum. Volume of Sediment Deposit is denoted by ΔV_s symbol.

How to calculate Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method using this online calculator? To use this online calculator for Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method, enter Cross-Sectional Area at Point 1 (A₁), Cross-Sectional Area at Point 2 (A₂) & Change in Head Between the Points (ΔH) and hit the calculate button. Here is how the Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method calculation can be explained with given input values -> 5 = (14+6)*(0.5/2).

FAQ

What is Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method?

The Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method formula is defined as the volume of sediment deposited between two consecutive heights above the new datum and is represented as ΔV_s = (A₁+A₂)*(ΔH/2) or Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2). Cross-Sectional Area at Point 1 is defined as the area of the section at point 1, Cross-Sectional Area at Point 2 is the area of cross section at a point 2 & Change in Head Between the Points refers to the difference in the hydraulic head at two different points in a fluid system separated by a small distance dl.

How to calculate Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method?

The Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method formula is defined as the volume of sediment deposited between two consecutive heights above the new datum is calculated using Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2). To calculate Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method, you need Cross-Sectional Area at Point 1 (A₁), Cross-Sectional Area at Point 2 (A₂) & Change in Head Between the Points (ΔH). With our tool, you need to enter the respective value for Cross-Sectional Area at Point 1, Cross-Sectional Area at Point 2 & Change in Head Between the Points and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Volume of Sediment Deposit?

In this formula, Volume of Sediment Deposit uses Cross-Sectional Area at Point 1, Cross-Sectional Area at Point 2 & Change in Head Between the Points. We can use 2 other way(s) to calculate the same, which is/are as follows -

Volume of Sediment Deposit = 0.5*((Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*Change in Head Between the Points)
Volume of Sediment Deposit = (Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2+sqrt(Cross-Sectional Area at Point 1*Cross-Sectional Area at Point 2))*(Change in Head Between the Points/3)

Home

FREE PDFs

🔍 Search