Volume of Parallelepiped given Total Surface Area and Lateral Surface Area Calculator

✖Total Surface Area of Parallelepiped is the total quantity of plane enclosed by the entire surface of the Parallelepiped.ⓘ Total Surface Area of Parallelepiped [TSA]			+10% -10%
✖Lateral Surface Area of Parallelepiped is the quantity of plane enclosed by all the lateral surfaces (that is, top and bottom faces are excluded) of the Parallelepiped.ⓘ Lateral Surface Area of Parallelepiped [LSA]			+10% -10%
✖Angle Beta of Parallelepiped is the angle formed by side A and side C at any of the two sharp tips of the Parallelepiped.ⓘ Angle Beta of Parallelepiped [∠β]			+10% -10%
✖Side B of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped.ⓘ Side B of Parallelepiped [S_b]			+10% -10%
✖Angle Alpha of Parallelepiped is the angle formed by side B and side C at any of the two sharp tips of the Parallelepiped.ⓘ Angle Alpha of Parallelepiped [∠α]			+10% -10%
✖Angle Gamma of Parallelepiped is the angle formed by side A and side B at any of the two sharp tips of the Parallelepiped.ⓘ Angle Gamma of Parallelepiped [∠γ]			+10% -10%

✖Volume of Parallelepiped is the total quantity of three-dimensional space enclosed by the surface of the Parallelepiped.ⓘ Volume of Parallelepiped given Total Surface Area and Lateral Surface Area [V]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallelepiped Formula PDF PDF Image

Volume of Parallelepiped given Total Surface Area and Lateral Surface Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Parallelepiped = 1/2*(Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/sin(Angle Beta of Parallelepiped)*Side B of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))
V = 1/2*(TSA-LSA)/sin(∠β)*S_b*sqrt(1+(2*cos(∠α)*cos(∠β)*cos(∠γ))-(cos(∠α)^2+cos(∠β)^2+cos(∠γ)^2))
This formula uses 3 Functions, 7 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Volume of Parallelepiped - (Measured in Cubic Meter) - Volume of Parallelepiped is the total quantity of three-dimensional space enclosed by the surface of the Parallelepiped.
Total Surface Area of Parallelepiped - (Measured in Square Meter) - Total Surface Area of Parallelepiped is the total quantity of plane enclosed by the entire surface of the Parallelepiped.
Lateral Surface Area of Parallelepiped - (Measured in Square Meter) - Lateral Surface Area of Parallelepiped is the quantity of plane enclosed by all the lateral surfaces (that is, top and bottom faces are excluded) of the Parallelepiped.
Angle Beta of Parallelepiped - (Measured in Radian) - Angle Beta of Parallelepiped is the angle formed by side A and side C at any of the two sharp tips of the Parallelepiped.
Side B of Parallelepiped - (Measured in Meter) - Side B of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped.
Angle Alpha of Parallelepiped - (Measured in Radian) - Angle Alpha of Parallelepiped is the angle formed by side B and side C at any of the two sharp tips of the Parallelepiped.
Angle Gamma of Parallelepiped - (Measured in Radian) - Angle Gamma of Parallelepiped is the angle formed by side A and side B at any of the two sharp tips of the Parallelepiped.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Parallelepiped: 1960 Square Meter --> 1960 Square Meter No Conversion Required
Lateral Surface Area of Parallelepiped: 1440 Square Meter --> 1440 Square Meter No Conversion Required
Angle Beta of Parallelepiped: 60 Degree --> 1.0471975511964 Radian (Check conversion here)
Side B of Parallelepiped: 20 Meter --> 20 Meter No Conversion Required
Angle Alpha of Parallelepiped: 45 Degree --> 0.785398163397301 Radian (Check conversion here)
Angle Gamma of Parallelepiped: 75 Degree --> 1.3089969389955 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = 1/2*(TSA-LSA)/sin(∠β)*S_b*sqrt(1+(2*cos(∠α)*cos(∠β)*cos(∠γ))-(cos(∠α)^2+cos(∠β)^2+cos(∠γ)^2)) --> 1/2*(1960-1440)/sin(1.0471975511964)*20*sqrt(1+(2*cos(0.785398163397301)*cos(1.0471975511964)*cos(1.3089969389955))-(cos(0.785398163397301)^2+cos(1.0471975511964)^2+cos(1.3089969389955)^2))

Evaluating ... ...

V = 3632.68989745955

STEP 3: Convert Result to Output's Unit

3632.68989745955 Cubic Meter --> No Conversion Required

FINAL ANSWER

3632.68989745955 ≈ 3632.69 Cubic Meter <-- Volume of Parallelepiped

(Calculation completed in 00.051 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Parallelepiped » Volume of Parallelepiped » Volume of Parallelepiped given Total Surface Area and Lateral Surface Area

Credits

Created by Divanshi Jain

Netaji Subhash University of Technology, Delhi (NSUT Delhi), Dwarka

Divanshi Jain has created this Calculator and 300+ more calculators!

Verified by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has verified this Calculator and 400+ more calculators!

< Volume of Parallelepiped Calculators

Volume of Parallelepiped given Lateral Surface Area, Side A and Side C

LaTeX Go Volume of Parallelepiped = (Lateral Surface Area of Parallelepiped*Side A of Parallelepiped*Side C of Parallelepiped)/(2*(Side A of Parallelepiped*sin(Angle Gamma of Parallelepiped)+Side C of Parallelepiped*sin(Angle Alpha of Parallelepiped)))*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))

Volume of Parallelepiped given Lateral Surface Area, Side B and Side C

LaTeX Go Volume of Parallelepiped = Side C of Parallelepiped/sin(Angle Gamma of Parallelepiped)*(Lateral Surface Area of Parallelepiped/2-Side B of Parallelepiped*Side C of Parallelepiped*sin(Angle Alpha of Parallelepiped))*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))

Volume of Parallelepiped given Total Surface Area and Lateral Surface Area

LaTeX Go Volume of Parallelepiped = 1/2*(Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/sin(Angle Beta of Parallelepiped)*Side B of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))

Volume of Parallelepiped

LaTeX Go Volume of Parallelepiped = Side A of Parallelepiped*Side B of Parallelepiped*Side C of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))

< Volume of Parallelepiped Calculators

Volume of Parallelepiped given Total Surface Area and Lateral Surface Area

Volume of Parallelepiped

Volume of Parallelepiped given Total Surface Area and Lateral Surface Area Formula

LaTeX Go

What is a Parallelepiped?

A Parallelepiped is a three-dimensional figure formed by six parallelograms (the term rhomboid is also sometimes used with this meaning). By analogy, it relates to a parallelogram just as a cube relates to a square. In Euclidean geometry, the four concepts—parallelepiped and cube in three dimensions, parallelogram and square in two dimensions—are defined, but in the context of a more general affine geometry, in which angles are not differentiated, only parallelograms and parallelepipeds exist.

How to Calculate Volume of Parallelepiped given Total Surface Area and Lateral Surface Area?

Volume of Parallelepiped given Total Surface Area and Lateral Surface Area calculator uses Volume of Parallelepiped = 1/2*(Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/sin(Angle Beta of Parallelepiped)*Side B of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2)) to calculate the Volume of Parallelepiped, The Volume of Parallelepiped given Total Surface Area and Lateral Surface Area formula is defined as the quantity of three-dimensional space enclosed by a closed surface of Parallelepiped, calculated using total surface area and lateral surface area of Parallelepiped. Volume of Parallelepiped is denoted by V symbol.

How to calculate Volume of Parallelepiped given Total Surface Area and Lateral Surface Area using this online calculator? To use this online calculator for Volume of Parallelepiped given Total Surface Area and Lateral Surface Area, enter Total Surface Area of Parallelepiped (TSA), Lateral Surface Area of Parallelepiped (LSA), Angle Beta of Parallelepiped (∠β), Side B of Parallelepiped (S_b), Angle Alpha of Parallelepiped (∠α) & Angle Gamma of Parallelepiped (∠γ) and hit the calculate button. Here is how the Volume of Parallelepiped given Total Surface Area and Lateral Surface Area calculation can be explained with given input values -> 3632.69 = 1/2*(1960-1440)/sin(1.0471975511964)*20*sqrt(1+(2*cos(0.785398163397301)*cos(1.0471975511964)*cos(1.3089969389955))-(cos(0.785398163397301)^2+cos(1.0471975511964)^2+cos(1.3089969389955)^2)).

FAQ

What is Volume of Parallelepiped given Total Surface Area and Lateral Surface Area?

The Volume of Parallelepiped given Total Surface Area and Lateral Surface Area formula is defined as the quantity of three-dimensional space enclosed by a closed surface of Parallelepiped, calculated using total surface area and lateral surface area of Parallelepiped and is represented as V = 1/2*(TSA-LSA)/sin(∠β)*S_b*sqrt(1+(2*cos(∠α)*cos(∠β)*cos(∠γ))-(cos(∠α)^2+cos(∠β)^2+cos(∠γ)^2)) or Volume of Parallelepiped = 1/2*(Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/sin(Angle Beta of Parallelepiped)*Side B of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2)). Total Surface Area of Parallelepiped is the total quantity of plane enclosed by the entire surface of the Parallelepiped, Lateral Surface Area of Parallelepiped is the quantity of plane enclosed by all the lateral surfaces (that is, top and bottom faces are excluded) of the Parallelepiped, Angle Beta of Parallelepiped is the angle formed by side A and side C at any of the two sharp tips of the Parallelepiped, Side B of Parallelepiped is the length of any one out of the three sides from any fixed vertex of the Parallelepiped, Angle Alpha of Parallelepiped is the angle formed by side B and side C at any of the two sharp tips of the Parallelepiped & Angle Gamma of Parallelepiped is the angle formed by side A and side B at any of the two sharp tips of the Parallelepiped.

How to calculate Volume of Parallelepiped given Total Surface Area and Lateral Surface Area?

The Volume of Parallelepiped given Total Surface Area and Lateral Surface Area formula is defined as the quantity of three-dimensional space enclosed by a closed surface of Parallelepiped, calculated using total surface area and lateral surface area of Parallelepiped is calculated using Volume of Parallelepiped = 1/2*(Total Surface Area of Parallelepiped-Lateral Surface Area of Parallelepiped)/sin(Angle Beta of Parallelepiped)*Side B of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2)). To calculate Volume of Parallelepiped given Total Surface Area and Lateral Surface Area, you need Total Surface Area of Parallelepiped (TSA), Lateral Surface Area of Parallelepiped (LSA), Angle Beta of Parallelepiped (∠β), Side B of Parallelepiped (S_b), Angle Alpha of Parallelepiped (∠α) & Angle Gamma of Parallelepiped (∠γ). With our tool, you need to enter the respective value for Total Surface Area of Parallelepiped, Lateral Surface Area of Parallelepiped, Angle Beta of Parallelepiped, Side B of Parallelepiped, Angle Alpha of Parallelepiped & Angle Gamma of Parallelepiped and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Volume of Parallelepiped?

In this formula, Volume of Parallelepiped uses Total Surface Area of Parallelepiped, Lateral Surface Area of Parallelepiped, Angle Beta of Parallelepiped, Side B of Parallelepiped, Angle Alpha of Parallelepiped & Angle Gamma of Parallelepiped. We can use 3 other way(s) to calculate the same, which is/are as follows -

Volume of Parallelepiped = Side A of Parallelepiped*Side B of Parallelepiped*Side C of Parallelepiped*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))
Volume of Parallelepiped = (Lateral Surface Area of Parallelepiped*Side A of Parallelepiped*Side C of Parallelepiped)/(2*(Side A of Parallelepiped*sin(Angle Gamma of Parallelepiped)+Side C of Parallelepiped*sin(Angle Alpha of Parallelepiped)))*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))
Volume of Parallelepiped = Side C of Parallelepiped/sin(Angle Gamma of Parallelepiped)*(Lateral Surface Area of Parallelepiped/2-Side B of Parallelepiped*Side C of Parallelepiped*sin(Angle Alpha of Parallelepiped))*sqrt(1+(2*cos(Angle Alpha of Parallelepiped)*cos(Angle Beta of Parallelepiped)*cos(Angle Gamma of Parallelepiped))-(cos(Angle Alpha of Parallelepiped)^2+cos(Angle Beta of Parallelepiped)^2+cos(Angle Gamma of Parallelepiped)^2))

Home

FREE PDFs

🔍 Search