Volume of Liquid Considering Condition of Maximum Discharge Calculator

✖Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area of Channel [A_cs]			+10% -10%
✖Top Width is defined as the width at the top of the section.ⓘ Top Width [T]			+10% -10%
✖Time interval is the time duration between two events/entities of interest.ⓘ Time Interval [Δt]			+10% -10%

✖Volume of water is the space that water takes in a container.ⓘ Volume of Liquid Considering Condition of Maximum Discharge [Vw]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Energy and Critical Depth Formulas PDF PDF Image

Volume of Liquid Considering Condition of Maximum Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Water = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)*Time Interval
Vw = sqrt((A_cs^3)*[g]/T)*Δt
This formula uses 1 Constants, 1 Functions, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Volume of Water - (Measured in Cubic Meter) - Volume of water is the space that water takes in a container.
Cross-Sectional Area of Channel - (Measured in Square Meter) - Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Top Width - (Measured in Meter) - Top Width is defined as the width at the top of the section.
Time Interval - (Measured in Second) - Time interval is the time duration between two events/entities of interest.

STEP 1: Convert Input(s) to Base Unit

Cross-Sectional Area of Channel: 3.4 Square Meter --> 3.4 Square Meter No Conversion Required
Top Width: 2.1 Meter --> 2.1 Meter No Conversion Required
Time Interval: 1.25 Second --> 1.25 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Vw = sqrt((A_cs^3)*[g]/T)*Δt --> sqrt((3.4^3)*[g]/2.1)*1.25

Evaluating ... ...

Vw = 16.9347612791953

STEP 3: Convert Result to Output's Unit

16.9347612791953 Cubic Meter --> No Conversion Required

FINAL ANSWER

16.9347612791953 ≈ 16.93476 Cubic Meter <-- Volume of Water

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Specific Energy and Critical Depth » Volume of Liquid Considering Condition of Maximum Discharge

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Specific Energy and Critical Depth Calculators

Mean Velocity of Flow for Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Mean Velocity = sqrt((Total Energy-(Depth of Flow+Height above Datum))*2*[g])

Depth of Flow given Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Depth of Flow = Total Energy-(((Mean Velocity^2)/(2*[g]))+Height above Datum)

Datum Height for Total Energy per unit Weight of Water in Flow Section

LaTeX Go Height above Datum = Total Energy-(((Mean Velocity^2)/(2*[g]))+Depth of Flow)

Total Energy per unit Weight of Water in Flow Section

LaTeX Go Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum

Volume of Liquid Considering Condition of Maximum Discharge Formula

LaTeX Go

Volume of Water = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)*Time Interval
Vw = sqrt((A_cs^3)*[g]/T)*Δt

What is Rate of Flow?

In physics and engineering, in particular fluid dynamics, the volumetric flow rate is the volume of fluid which passes per unit time; usually it is represented by the symbol Q. The SI unit is cubic metres per second. Another unit used is standard cubic centimetres per minute. In hydrometry, it is known as discharge.

How to Calculate Volume of Liquid Considering Condition of Maximum Discharge?

Volume of Liquid Considering Condition of Maximum Discharge calculator uses Volume of Water = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)*Time Interval to calculate the Volume of Water, The Volume of Liquid Considering Condition of Maximum Discharge formula is defined as the amount of water in channel flow. Volume of Water is denoted by Vw symbol.

How to calculate Volume of Liquid Considering Condition of Maximum Discharge using this online calculator? To use this online calculator for Volume of Liquid Considering Condition of Maximum Discharge, enter Cross-Sectional Area of Channel (A_cs), Top Width (T) & Time Interval (Δt) and hit the calculate button. Here is how the Volume of Liquid Considering Condition of Maximum Discharge calculation can be explained with given input values -> 156.927 = sqrt((3.4^3)*[g]/2.1)*1.25.

FAQ

What is Volume of Liquid Considering Condition of Maximum Discharge?

The Volume of Liquid Considering Condition of Maximum Discharge formula is defined as the amount of water in channel flow and is represented as Vw = sqrt((A_cs^3)*[g]/T)*Δt or Volume of Water = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)*Time Interval. Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Top Width is defined as the width at the top of the section & Time interval is the time duration between two events/entities of interest.

How to calculate Volume of Liquid Considering Condition of Maximum Discharge?

The Volume of Liquid Considering Condition of Maximum Discharge formula is defined as the amount of water in channel flow is calculated using Volume of Water = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)*Time Interval. To calculate Volume of Liquid Considering Condition of Maximum Discharge, you need Cross-Sectional Area of Channel (A_cs), Top Width (T) & Time Interval (Δt). With our tool, you need to enter the respective value for Cross-Sectional Area of Channel, Top Width & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search