Volume of Helical Reinforcement in One Loop Calculator

✖Diameter of core is the diameter of the core of a given spiral reinforcement.ⓘ Diameter of Core [d_c]			+10% -10%
✖The diameter of spiral reinforcement is the diameter of the given spirally reinforced structure.ⓘ Diameter of Spiral Reinforcement [Φ]			+10% -10%
✖The area of steel reinforcement for columns or beams is defined as an area of vertical reinforcement which is provided to absorb the bending tensile stresses in the longitudinal direction.ⓘ Area of Steel Reinforcement [A_st]			+10% -10%

✖Volume of helical reinforcement is defined as the volume of the given helical structure.ⓘ Volume of Helical Reinforcement in One Loop [V_h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Short Axially Loaded Columns with Helical Ties Formulas PDF PDF Image

Volume of Helical Reinforcement in One Loop Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Helical Reinforcement = pi*(Diameter of Core-Diameter of Spiral Reinforcement)*Area of Steel Reinforcement
V_h = pi*(d_c-Φ)*A_st
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Volume of Helical Reinforcement - (Measured in Cubic Meter) - Volume of helical reinforcement is defined as the volume of the given helical structure.
Diameter of Core - (Measured in Millimeter) - Diameter of core is the diameter of the core of a given spiral reinforcement.
Diameter of Spiral Reinforcement - (Measured in Millimeter) - The diameter of spiral reinforcement is the diameter of the given spirally reinforced structure.
Area of Steel Reinforcement - (Measured in Square Millimeter) - The area of steel reinforcement for columns or beams is defined as an area of vertical reinforcement which is provided to absorb the bending tensile stresses in the longitudinal direction.

STEP 1: Convert Input(s) to Base Unit

Diameter of Core: 150 Millimeter --> 150 Millimeter No Conversion Required
Diameter of Spiral Reinforcement: 15 Millimeter --> 15 Millimeter No Conversion Required
Area of Steel Reinforcement: 452 Square Millimeter --> 452 Square Millimeter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_h = pi*(d_c-Φ)*A_st --> pi*(150-15)*452

Evaluating ... ...

V_h = 191699.983722049

STEP 3: Convert Result to Output's Unit

191699.983722049 Cubic Meter --> No Conversion Required

FINAL ANSWER

191699.983722049 ≈ 191700 Cubic Meter <-- Volume of Helical Reinforcement

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Columns » Short Axially Loaded Columns with Helical Ties » Volume of Helical Reinforcement in One Loop

Credits

Created by Pranav More

Vellore Institute of Technology, Vellore (VIT, Vellore), Vellore

Pranav More has created this Calculator and 10+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Short Axially Loaded Columns with Helical Ties Calculators

Characteristic Strength of Compression Reinforcement given Factored Load in Spiral Columns

LaTeX Go Characteristic Strength of Steel Reinforcement = ((Factored Load/1.05)-(0.4*Characteristic Compressive Strength*Area of Concrete))/(0.67*Area of Steel Reinforcement)

Characteristic Compressive Strength of Concrete given Factored Axial Load in Spiral Columns

LaTeX Go Characteristic Compressive Strength = ((Factored Load/1.05)-0.67*Characteristic Strength of Steel Reinforcement*Area of Steel Reinforcement)/(0.4*Area of Concrete)

Area of Concrete given Factored Axial Load

LaTeX Go Area of Concrete = ((Factored Load/1.05)-0.67*Characteristic Strength of Steel Reinforcement*Area of Steel Reinforcement)/(0.4*Characteristic Compressive Strength)

Factored Axial Load on Member of Spiral Columns

LaTeX Go Factored Load = 1.05*(0.4*Characteristic Compressive Strength*Area of Concrete+0.67*Characteristic Strength of Steel Reinforcement*Area of Steel Reinforcement)

Volume of Helical Reinforcement in One Loop Formula

LaTeX Go

Volume of Helical Reinforcement = pi*(Diameter of Core-Diameter of Spiral Reinforcement)*Area of Steel Reinforcement
V_h = pi*(d_c-Φ)*A_st

What is a Helical Reinforcement?

Helical reinforcement is capable of protecting columns or piles against seismic loads. Whenever the column reaches the failure condition, then concrete outside hoops will crack & it falls off first, followed by the whole columns’ eventual failure.

How to Calculate Volume of Helical Reinforcement in One Loop?

Volume of Helical Reinforcement in One Loop calculator uses Volume of Helical Reinforcement = pi*(Diameter of Core-Diameter of Spiral Reinforcement)*Area of Steel Reinforcement to calculate the Volume of Helical Reinforcement, The Volume of Helical Reinforcement in One Loop formula is defined as the volume of the given helical reinforcement which is small-diameter reinforcement wrapped around the main or longitudinal reinforcement, restraining the lateral expansion of the concrete under compression, and thus strengthening the structure. Volume of Helical Reinforcement is denoted by V_h symbol.

How to calculate Volume of Helical Reinforcement in One Loop using this online calculator? To use this online calculator for Volume of Helical Reinforcement in One Loop, enter Diameter of Core (d_c), Diameter of Spiral Reinforcement (Φ) & Area of Steel Reinforcement (A_st) and hit the calculate button. Here is how the Volume of Helical Reinforcement in One Loop calculation can be explained with given input values -> 191700 = pi*(0.15-0.015)*0.000452.

FAQ

What is Volume of Helical Reinforcement in One Loop?

The Volume of Helical Reinforcement in One Loop formula is defined as the volume of the given helical reinforcement which is small-diameter reinforcement wrapped around the main or longitudinal reinforcement, restraining the lateral expansion of the concrete under compression, and thus strengthening the structure and is represented as V_h = pi*(d_c-Φ)*A_st or Volume of Helical Reinforcement = pi*(Diameter of Core-Diameter of Spiral Reinforcement)*Area of Steel Reinforcement. Diameter of core is the diameter of the core of a given spiral reinforcement, The diameter of spiral reinforcement is the diameter of the given spirally reinforced structure & The area of steel reinforcement for columns or beams is defined as an area of vertical reinforcement which is provided to absorb the bending tensile stresses in the longitudinal direction.

How to calculate Volume of Helical Reinforcement in One Loop?

The Volume of Helical Reinforcement in One Loop formula is defined as the volume of the given helical reinforcement which is small-diameter reinforcement wrapped around the main or longitudinal reinforcement, restraining the lateral expansion of the concrete under compression, and thus strengthening the structure is calculated using Volume of Helical Reinforcement = pi*(Diameter of Core-Diameter of Spiral Reinforcement)*Area of Steel Reinforcement. To calculate Volume of Helical Reinforcement in One Loop, you need Diameter of Core (d_c), Diameter of Spiral Reinforcement (Φ) & Area of Steel Reinforcement (A_st). With our tool, you need to enter the respective value for Diameter of Core, Diameter of Spiral Reinforcement & Area of Steel Reinforcement and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search