Volume of Empty Capillary Pores Calculator

✖Volume of Capillary Pores is the decrease in the initial volume of the mixture of cement and water after hydration.ⓘ Volume of Capillary Pores [V_cp]			+10% -10%
✖Volume of Water Filled Capillary Pores is the total volume of capillary water filled in pores.ⓘ Volume of Water Filled Capillary Pores [V_wcp]			+10% -10%

✖Volume of Empty Capillary Pores is the volume of the capillary pores which are not occupied by any floccules.ⓘ Volume of Empty Capillary Pores [Vec]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mix Design, Modulus of Elasticity and Tensile Strength of Concrete Formulas PDF PDF Image

Volume of Empty Capillary Pores Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores)
Vec = (V_cp-V_wcp)
This formula uses 3 Variables

Variables Used

Volume of Empty Capillary Pores - (Measured in Cubic Meter) - Volume of Empty Capillary Pores is the volume of the capillary pores which are not occupied by any floccules.
Volume of Capillary Pores - (Measured in Cubic Meter) - Volume of Capillary Pores is the decrease in the initial volume of the mixture of cement and water after hydration.
Volume of Water Filled Capillary Pores - (Measured in Cubic Meter) - Volume of Water Filled Capillary Pores is the total volume of capillary water filled in pores.

STEP 1: Convert Input(s) to Base Unit

Volume of Capillary Pores: 8 Milliliter --> 8E-06 Cubic Meter (Check conversion here)
Volume of Water Filled Capillary Pores: 4.5 Milliliter --> 4.5E-06 Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Vec = (V_cp-V_wcp) --> (8E-06-4.5E-06)

Evaluating ... ...

Vec = 3.5E-06

STEP 3: Convert Result to Output's Unit

3.5E-06 Cubic Meter -->3.5 Milliliter (Check conversion here)

FINAL ANSWER

3.5 Milliliter <-- Volume of Empty Capillary Pores

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Concrete Formulas » Mix Design, Modulus of Elasticity and Tensile Strength of Concrete » Job Mix Concrete Volume » Volume of Empty Capillary Pores

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Swarnima Singh

NIT Jaipur (mnitj), jaipur

Swarnima Singh has verified this Calculator and 10 more calculators!

< Job Mix Concrete Volume Calculators

Absolute Volume of Component

LaTeX Go Absolute Volume = Weight of Material/(Specific Gravity of Material*Water Density)

Weight of Material given its Absolute Volume

LaTeX Go Weight of Material = Absolute Volume*Specific Gravity of Material*Water Density

Weight of Cementitious Materials in Concrete Batch

LaTeX Go Weight of Cementitious Materials = Weight of Mixing Water/Water Cement Ratio

Water Cement Ratio

LaTeX Go Water Cement Ratio = Weight of Mixing Water/Weight of Cementitious Materials

Volume of Empty Capillary Pores Formula

LaTeX Go

Volume of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores)
Vec = (V_cp-V_wcp)

What is Hydration in Concrete?

The water causes the hardening of concrete through a process called hydration. Hydration is a chemical reaction in which the major compounds in cement form chemical bonds with water molecules and become hydrates or hydration products.

Why Hydration of Cement is important?

The rate of heat generation during cement hydration increases with temperature and at low temperature hydration reaction can become extremely slow. And hence, the temperature in the annulus is one of the most important factors influencing the development of the cement compressive strength.

How to Calculate Volume of Empty Capillary Pores?

Volume of Empty Capillary Pores calculator uses Volume of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores) to calculate the Volume of Empty Capillary Pores, The Volume of Empty Capillary Pores formula is defined as the volume of empty capillary pores that are left empty to be filled with water. Volume of Empty Capillary Pores is denoted by Vec symbol.

How to calculate Volume of Empty Capillary Pores using this online calculator? To use this online calculator for Volume of Empty Capillary Pores, enter Volume of Capillary Pores (V_cp) & Volume of Water Filled Capillary Pores (V_wcp) and hit the calculate button. Here is how the Volume of Empty Capillary Pores calculation can be explained with given input values -> 3.5E+6 = (8E-06-4.5E-06).

FAQ

What is Volume of Empty Capillary Pores?

The Volume of Empty Capillary Pores formula is defined as the volume of empty capillary pores that are left empty to be filled with water and is represented as Vec = (V_cp-V_wcp) or Volume of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores). Volume of Capillary Pores is the decrease in the initial volume of the mixture of cement and water after hydration & Volume of Water Filled Capillary Pores is the total volume of capillary water filled in pores.

How to calculate Volume of Empty Capillary Pores?

The Volume of Empty Capillary Pores formula is defined as the volume of empty capillary pores that are left empty to be filled with water is calculated using Volume of Empty Capillary Pores = (Volume of Capillary Pores-Volume of Water Filled Capillary Pores). To calculate Volume of Empty Capillary Pores, you need Volume of Capillary Pores (V_cp) & Volume of Water Filled Capillary Pores (V_wcp). With our tool, you need to enter the respective value for Volume of Capillary Pores & Volume of Water Filled Capillary Pores and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search