Volts per Division Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volt per Division = Peak Voltage/Vertical Peak to Peak Division
Vdiv = Vmax/Vp-p
This formula uses 3 Variables
Variables Used
Volt per Division - Volt per Division is a setting on an oscilloscope that determines the vertical scale of the displayed waveform.
Peak Voltage - (Measured in Volt) - Peak Voltage refers to the maximum instantaneous value of a voltage waveform over one complete cycle.
Vertical Peak to Peak Division - (Measured in Volt) - Vertical Peak to Peak Division is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform.
STEP 1: Convert Input(s) to Base Unit
Peak Voltage: 17.47488 Volt --> 17.47488 Volt No Conversion Required
Vertical Peak to Peak Division: 4.578 Volt --> 4.578 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vdiv = Vmax/Vp-p --> 17.47488/4.578
Evaluating ... ...
Vdiv = 3.81714285714286
STEP 3: Convert Result to Output's Unit
3.81714285714286 --> No Conversion Required
FINAL ANSWER
3.81714285714286 3.817143 <-- Volt per Division
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Voltmeter Specifications Calculators

Voltage Multiplying Power of Moving Iron Voltmeter
​ LaTeX ​ Go Multiplying Factor = sqrt(((Meter Internal Resistance+Series Resistance)^2+(Angular Frequency*Inductance)^2)/((Meter Internal Resistance)^2+(Angular Frequency*Inductance)^2))
Deflection Angle of Electrodynamometer Voltmeter
​ LaTeX ​ Go Deflection Angle = (Total Voltage^2*Mutual Inductance Change with Angle*cos(Phase Difference))/(Spring Constant*Impedance^2)
Voltage of Moving Iron Voltmeter
​ LaTeX ​ Go Voltage = Meter Current*sqrt((Meter Internal Resistance+Series Resistance)^2+(Angular Frequency*Inductance)^2)
Deflecting Torque of Electrodynamometer Voltmeter
​ LaTeX ​ Go Deflecting Torque = (Total Voltage/Impedance)^2*Mutual Inductance Change with Angle*cos(Phase Difference)

Volts per Division Formula

​LaTeX ​Go
Volt per Division = Peak Voltage/Vertical Peak to Peak Division
Vdiv = Vmax/Vp-p

Can peak to peak voltage be negative?

The first characteristic of AC power is its "amplitude". Amplitude is the maximum value of current or voltage. It is represented by either of the two peaks of the sine wave. This voltage level is also referred to as the peak voltage and can be either positive or negative.

How to Calculate Volts per Division?

Volts per Division calculator uses Volt per Division = Peak Voltage/Vertical Peak to Peak Division to calculate the Volt per Division, The Volts per Division formula is defined as the most basic way to calculate voltage is to count the number of divisions from top to bottom of the signal and multiply this by the vertical scale (volts/division). Volt per Division is denoted by Vdiv symbol.

How to calculate Volts per Division using this online calculator? To use this online calculator for Volts per Division, enter Peak Voltage (Vmax) & Vertical Peak to Peak Division (Vp-p) and hit the calculate button. Here is how the Volts per Division calculation can be explained with given input values -> 3.817143 = 17.47488/4.578.

FAQ

What is Volts per Division?
The Volts per Division formula is defined as the most basic way to calculate voltage is to count the number of divisions from top to bottom of the signal and multiply this by the vertical scale (volts/division) and is represented as Vdiv = Vmax/Vp-p or Volt per Division = Peak Voltage/Vertical Peak to Peak Division. Peak Voltage refers to the maximum instantaneous value of a voltage waveform over one complete cycle & Vertical Peak to Peak Division is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform.
How to calculate Volts per Division?
The Volts per Division formula is defined as the most basic way to calculate voltage is to count the number of divisions from top to bottom of the signal and multiply this by the vertical scale (volts/division) is calculated using Volt per Division = Peak Voltage/Vertical Peak to Peak Division. To calculate Volts per Division, you need Peak Voltage (Vmax) & Vertical Peak to Peak Division (Vp-p). With our tool, you need to enter the respective value for Peak Voltage & Vertical Peak to Peak Division and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!