Voltage Gain given Transconductance and Collector Resistance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Voltage Gain = -Transconductance*Collector Resistance
Av = -Gm*Rc
This formula uses 3 Variables
Variables Used
Voltage Gain - (Measured in Decibel) - Voltage gain is defined as the ratio of the output voltage to the input voltage.
Transconductance - (Measured in Siemens) - Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.
Collector Resistance - (Measured in Ohm) - Collector Resistance (Rc)helps to set the transistor at the "operating point" of the amplifier. The purpose of the emitter resistor Re is to prevent "thermal runaway".
STEP 1: Convert Input(s) to Base Unit
Transconductance: 1.72 Millisiemens --> 0.00172 Siemens (Check conversion ​here)
Collector Resistance: 3.75 Kilohm --> 3750 Ohm (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Av = -Gm*Rc --> -0.00172*3750
Evaluating ... ...
Av = -6.45
STEP 3: Convert Result to Output's Unit
-6.45 Decibel --> No Conversion Required
FINAL ANSWER
-6.45 Decibel <-- Voltage Gain
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Amplification Factor or Gain Calculators

Voltage Gain given all Voltages
​ LaTeX ​ Go Voltage Gain = -(Supply Voltage-Collector-Emitter Voltage)/Thermal Voltage
Voltage Gain given Collector Current
​ LaTeX ​ Go Voltage Gain = -(Collector Current/Thermal Voltage)*Collector Resistance
Open Circuit Voltage Gain given Open Circuit Transresistance
​ LaTeX ​ Go Open Circuit Voltage Gain = Open Circuit Transresistance/Input Resistance
Short-Circuit Current Gain
​ LaTeX ​ Go Current Gain = Output Current/Input Current

Voltage Gain given Transconductance and Collector Resistance Formula

​LaTeX ​Go
Voltage Gain = -Transconductance*Collector Resistance
Av = -Gm*Rc

What is voltage gain?

The difference between the output signal voltage level in decibels and the input signal voltage level in decibels; this value is equal to 20 times the common logarithm of the ratio of the output voltage to the input voltage.

How to Calculate Voltage Gain given Transconductance and Collector Resistance?

Voltage Gain given Transconductance and Collector Resistance calculator uses Voltage Gain = -Transconductance*Collector Resistance to calculate the Voltage Gain, The Voltage Gain given Transconductance and Collector Resistance formula is defined as is the amount of voltage that an electronic device needs in order to power on and function. Voltage Gain is denoted by Av symbol.

How to calculate Voltage Gain given Transconductance and Collector Resistance using this online calculator? To use this online calculator for Voltage Gain given Transconductance and Collector Resistance, enter Transconductance (Gm) & Collector Resistance (Rc) and hit the calculate button. Here is how the Voltage Gain given Transconductance and Collector Resistance calculation can be explained with given input values -> -6.45 = -0.00172*3750.

FAQ

What is Voltage Gain given Transconductance and Collector Resistance?
The Voltage Gain given Transconductance and Collector Resistance formula is defined as is the amount of voltage that an electronic device needs in order to power on and function and is represented as Av = -Gm*Rc or Voltage Gain = -Transconductance*Collector Resistance. Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device & Collector Resistance (Rc)helps to set the transistor at the "operating point" of the amplifier. The purpose of the emitter resistor Re is to prevent "thermal runaway".
How to calculate Voltage Gain given Transconductance and Collector Resistance?
The Voltage Gain given Transconductance and Collector Resistance formula is defined as is the amount of voltage that an electronic device needs in order to power on and function is calculated using Voltage Gain = -Transconductance*Collector Resistance. To calculate Voltage Gain given Transconductance and Collector Resistance, you need Transconductance (Gm) & Collector Resistance (Rc). With our tool, you need to enter the respective value for Transconductance & Collector Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Voltage Gain?
In this formula, Voltage Gain uses Transconductance & Collector Resistance. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Voltage Gain = -(Collector Current/Thermal Voltage)*Collector Resistance
  • Voltage Gain = -(Supply Voltage-Collector-Emitter Voltage)/Thermal Voltage
  • Voltage Gain = -Transconductance*((Collector Resistance*Load Resistance)/(Collector Resistance+Load Resistance))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!