Viscosity of Film given Mass Flow of Condensate Calculator

✖The density of Liquid is the mass of a unit volume of liquid.ⓘ Density of Liquid [ρ_L]			+10% -10%
✖The Density of Vapor is the mass of a unit volume of a material substance.ⓘ Density of Vapor [ρ_v]			+10% -10%
✖Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film.ⓘ Film Thickness [δ]			+10% -10%
✖Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units.ⓘ Mass Flow Rate [ṁ]			+10% -10%

✖Viscosity of Film is a measure of its resistance to deformation at a given rate.ⓘ Viscosity of Film given Mass Flow of Condensate [μ_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Condensation Formulas PDF PDF Image

Viscosity of Film given Mass Flow of Condensate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate)
μ_f = (ρ_L*(ρ_L-ρ_v)*[g]*(δ^3))/(3*ṁ)
This formula uses 1 Constants, 5 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Viscosity of Film - (Measured in Pascal Second) - Viscosity of Film is a measure of its resistance to deformation at a given rate.
Density of Liquid - (Measured in Kilogram per Cubic Meter) - The density of Liquid is the mass of a unit volume of liquid.
Density of Vapor - (Measured in Kilogram per Cubic Meter) - The Density of Vapor is the mass of a unit volume of a material substance.
Film Thickness - (Measured in Meter) - Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film.
Mass Flow Rate - (Measured in Kilogram per Second) - Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units.

STEP 1: Convert Input(s) to Base Unit

Density of Liquid: 1000 Kilogram per Cubic Meter --> 1000 Kilogram per Cubic Meter No Conversion Required
Density of Vapor: 0.5 Kilogram per Cubic Meter --> 0.5 Kilogram per Cubic Meter No Conversion Required
Film Thickness: 0.00232 Meter --> 0.00232 Meter No Conversion Required
Mass Flow Rate: 1.4 Kilogram per Second --> 1.4 Kilogram per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ_f = (ρ_L*(ρ_L-ρ_v)*[g]*(δ^3))/(3*ṁ) --> (1000*(1000-0.5)*[g]*(0.00232^3))/(3*1.4)

Evaluating ... ...

μ_f = 0.0291419184343253

STEP 3: Convert Result to Output's Unit

0.0291419184343253 Pascal Second -->0.0291419184343253 Newton Second per Square Meter (Check conversion here)

FINAL ANSWER

0.0291419184343253 ≈ 0.029142 Newton Second per Square Meter <-- Viscosity of Film

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Heat Transfer » Boiling and Condensation » Condensation » Viscosity of Film given Mass Flow of Condensate

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Condensation Calculators

Condensation Number

LaTeX Go Condensation Number = (Average Heat Transfer Coefficient)*((((Viscosity of Film)^2)/((Thermal Conductivity^3)*(Density of Liquid Film)*(Density of Liquid Film-Density of Vapor)*[g]))^(1/3))

Film Thickness given Mass Flow of Condensate

LaTeX Go Film Thickness = ((3*Viscosity of Film*Mass Flow Rate)/(Density of Liquid*(Density of Liquid-Density of Vapor)*[g]))^(1/3)

Condensation Number for Horizontal Cylinder

LaTeX Go Condensation Number = 1.514*((Reynolds Number of Film)^(-1/3))

Condensation Number for Vertical Plate

LaTeX Go Condensation Number = 1.47*((Reynolds Number of Film)^(-1/3))

Viscosity of Film given Mass Flow of Condensate Formula

LaTeX Go

Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate)
μ_f = (ρ_L*(ρ_L-ρ_v)*[g]*(δ^3))/(3*ṁ)

What is Heat Transfer?

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.

Define Thermal Conductivity & Factors affecting it?

Thermal conductivity is defined as the ability of a substance to conduct heat. Factors Affecting The Thermal Conductivity are: Moisture, Density of material, Pressure, Temperature & Structure of material.

How to Calculate Viscosity of Film given Mass Flow of Condensate?

Viscosity of Film given Mass Flow of Condensate calculator uses Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate) to calculate the Viscosity of Film, The Viscosity of Film given Mass Flow of Condensate formula is defined as as the function of Viscosity of film, mass flow rate of condensate, density of liquid, density of vapor. In two-phase heat transfer applications that do not contain a wick structure, a thin film of liquid is often present enclosing either partially or completely around the vapor bubbles. Film thickness would be the thickness of this thin layer of liquid. Also, there are applications that only use a thin layer of liquid for heat transfer applications. This used as it is shown to have enhanced heat transfer capabilities in certain applications. Viscosity of Film is denoted by μ_f symbol.

How to calculate Viscosity of Film given Mass Flow of Condensate using this online calculator? To use this online calculator for Viscosity of Film given Mass Flow of Condensate, enter Density of Liquid (ρ_L), Density of Vapor (ρ_v), Film Thickness (δ) & Mass Flow Rate (ṁ) and hit the calculate button. Here is how the Viscosity of Film given Mass Flow of Condensate calculation can be explained with given input values -> 0.029142 = (1000*(1000-0.5)*[g]*(0.00232^3))/(3*1.4).

FAQ

What is Viscosity of Film given Mass Flow of Condensate?

The Viscosity of Film given Mass Flow of Condensate formula is defined as as the function of Viscosity of film, mass flow rate of condensate, density of liquid, density of vapor. In two-phase heat transfer applications that do not contain a wick structure, a thin film of liquid is often present enclosing either partially or completely around the vapor bubbles. Film thickness would be the thickness of this thin layer of liquid. Also, there are applications that only use a thin layer of liquid for heat transfer applications. This used as it is shown to have enhanced heat transfer capabilities in certain applications and is represented as μ_f = (ρ_L*(ρ_L-ρ_v)*[g]*(δ^3))/(3*ṁ) or Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate). The density of Liquid is the mass of a unit volume of liquid, The Density of Vapor is the mass of a unit volume of a material substance, Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film & Mass flow rate is the mass of a substance that passes per unit of time. Its unit is kilogram per second in SI units.

How to calculate Viscosity of Film given Mass Flow of Condensate?

The Viscosity of Film given Mass Flow of Condensate formula is defined as as the function of Viscosity of film, mass flow rate of condensate, density of liquid, density of vapor. In two-phase heat transfer applications that do not contain a wick structure, a thin film of liquid is often present enclosing either partially or completely around the vapor bubbles. Film thickness would be the thickness of this thin layer of liquid. Also, there are applications that only use a thin layer of liquid for heat transfer applications. This used as it is shown to have enhanced heat transfer capabilities in certain applications is calculated using Viscosity of Film = (Density of Liquid*(Density of Liquid-Density of Vapor)*[g]*(Film Thickness^3))/(3*Mass Flow Rate). To calculate Viscosity of Film given Mass Flow of Condensate, you need Density of Liquid (ρ_L), Density of Vapor (ρ_v), Film Thickness (δ) & Mass Flow Rate (ṁ). With our tool, you need to enter the respective value for Density of Liquid, Density of Vapor, Film Thickness & Mass Flow Rate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Viscosity of Film?

In this formula, Viscosity of Film uses Density of Liquid, Density of Vapor, Film Thickness & Mass Flow Rate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Viscosity of Film = (4*Mass Flow of Condensate)/(Wetted Perimeter*Reynolds Number of Film)

Home

FREE PDFs

🔍 Search