Vertical Peak to Peak Division Solution

STEP 0: Pre-Calculation Summary
Formula Used
Vertical Peak to Peak Division = Peak Voltage/Voltage per Division
divpp = Vp/Vdiv
This formula uses 3 Variables
Variables Used
Vertical Peak to Peak Division - Vertical Peak to Peak Division is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform.
Peak Voltage - (Measured in Volt) - Peak Voltage refers to the maximum voltage reached by an electrical signal during its cycle. It is the highest positive voltage or the lowest negative voltage that the waveform reaches.
Voltage per Division - (Measured in Volt) - Voltage per Division refers to the vertical scale setting, which determines the voltage range represented by each vertical division on the oscilloscope screen.
STEP 1: Convert Input(s) to Base Unit
Peak Voltage: 13 Volt --> 13 Volt No Conversion Required
Voltage per Division: 5.78 Volt --> 5.78 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
divpp = Vp/Vdiv --> 13/5.78
Evaluating ... ...
divpp = 2.24913494809689
STEP 3: Convert Result to Output's Unit
2.24913494809689 --> No Conversion Required
FINAL ANSWER
2.24913494809689 2.249135 <-- Vertical Peak to Peak Division
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Oscilloscope Calculators

Modulus Number of Counter
​ LaTeX ​ Go Counter Number = log(Counter Modulus Number,(Output Time Period/Oscillation Time Period))
Oscillation Time Period
​ LaTeX ​ Go Oscillation Time Period = Output Time Period/(Counter Modulus Number^Counter Number)
Output Time Period
​ LaTeX ​ Go Output Time Period = Oscillation Time Period*Counter Modulus Number^Counter Number
Time Period of Waveform
​ LaTeX ​ Go Progressive Wave Time Period = Horizontal Division per Cycle*Time per Division

Vertical Peak to Peak Division Formula

​LaTeX ​Go
Vertical Peak to Peak Division = Peak Voltage/Voltage per Division
divpp = Vp/Vdiv

Can peak to peak voltage be negative?

The first characteristic of AC power is its "amplitude". Amplitude is the maximum value of current or voltage. It is represented by either of the two peaks of the sine wave. This voltage level is also referred to as the peak voltage and can be either positive or negative.

How to Calculate Vertical Peak to Peak Division?

Vertical Peak to Peak Division calculator uses Vertical Peak to Peak Division = Peak Voltage/Voltage per Division to calculate the Vertical Peak to Peak Division, The Vertical Peak to Peak Division formula is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform. Vertical Peak to Peak Division is denoted by divpp symbol.

How to calculate Vertical Peak to Peak Division using this online calculator? To use this online calculator for Vertical Peak to Peak Division, enter Peak Voltage (Vp) & Voltage per Division (Vdiv) and hit the calculate button. Here is how the Vertical Peak to Peak Division calculation can be explained with given input values -> 2.249135 = 13/5.78.

FAQ

What is Vertical Peak to Peak Division?
The Vertical Peak to Peak Division formula is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform and is represented as divpp = Vp/Vdiv or Vertical Peak to Peak Division = Peak Voltage/Voltage per Division. Peak Voltage refers to the maximum voltage reached by an electrical signal during its cycle. It is the highest positive voltage or the lowest negative voltage that the waveform reaches & Voltage per Division refers to the vertical scale setting, which determines the voltage range represented by each vertical division on the oscilloscope screen.
How to calculate Vertical Peak to Peak Division?
The Vertical Peak to Peak Division formula is defined as the difference between the maximum positive and the maximum negative amplitudes of a waveform is calculated using Vertical Peak to Peak Division = Peak Voltage/Voltage per Division. To calculate Vertical Peak to Peak Division, you need Peak Voltage (Vp) & Voltage per Division (Vdiv). With our tool, you need to enter the respective value for Peak Voltage & Voltage per Division and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!