Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity Calculator

✖The Outer Height refers to the external vertical dimension of an object or structure.ⓘ Outer Height [H]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%
✖The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Crack [h]			+10% -10%

✖The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.ⓘ Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity [v^']

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Falling Speed = Outer Height*(Settling Velocity/Height of Crack)
v^' = H*(V_s/h)
This formula uses 4 Variables

Variables Used

Falling Speed - (Measured in Centimeter per Second) - The Falling Speed refers to the constant speed at which a particle falls through a fluid when the force of gravity is balanced by the drag force and buoyant force acting on the particle.
Outer Height - (Measured in Meter) - The Outer Height refers to the external vertical dimension of an object or structure.
Settling Velocity - (Measured in Centimeter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
Height of Crack - (Measured in Meter) - The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

STEP 1: Convert Input(s) to Base Unit

Outer Height: 40 Meter --> 40 Meter No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 150 Centimeter per Second (Check conversion here)
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v^' = H*(V_s/h) --> 40*(150/12)

Evaluating ... ...

v^' = 500

STEP 3: Convert Result to Output's Unit

5 Meter per Second --> No Conversion Required

FINAL ANSWER

5 Meter per Second <-- Falling Speed

(Calculation completed in 00.009 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Vertical Falling Speed » Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Vertical Falling Speed Calculators

Vertical Falling Speed given Height at Outlet Zone with respect to Discharge

LaTeX Go Falling Speed = Outer Height*Discharge/(Length*Width*Height of Crack)

Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity

LaTeX Go Falling Speed = Outer Height*(Settling Velocity/Height of Crack)

Width of Tank given Vertical Falling Speed in Sedimentation Tank

LaTeX Go Width = Discharge/(Settling Velocity*Length)

Vertical Falling Speed in Sedimentation Tank

LaTeX Go Settling Velocity = Discharge/(Length*Width)

Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity Formula

LaTeX Go

Falling Speed = Outer Height*(Settling Velocity/Height of Crack)
v^' = H*(V_s/h)

What is Settling Speed ?

The settling velocity (also referred to as the “sedimentation velocity”) is defined as the terminal velocity of a particle in still fluid

How to Calculate Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity?

Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity calculator uses Falling Speed = Outer Height*(Settling Velocity/Height of Crack) to calculate the Falling Speed, The Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity formula is defined as the constant speed at which a particle falls through a fluid when the forces acting on it are balanced. Falling Speed is denoted by v^' symbol.

How to calculate Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity using this online calculator? To use this online calculator for Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity, enter Outer Height (H), Settling Velocity (V_s) & Height of Crack (h) and hit the calculate button. Here is how the Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity calculation can be explained with given input values -> 5 = 40*(1.5/12).

FAQ

What is Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity?

The Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity formula is defined as the constant speed at which a particle falls through a fluid when the forces acting on it are balanced and is represented as v^' = H*(V_s/h) or Falling Speed = Outer Height*(Settling Velocity/Height of Crack). The Outer Height refers to the external vertical dimension of an object or structure, The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed & The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

How to calculate Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity?

The Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity formula is defined as the constant speed at which a particle falls through a fluid when the forces acting on it are balanced is calculated using Falling Speed = Outer Height*(Settling Velocity/Height of Crack). To calculate Vertical Falling Speed given Height at Outlet Zone with respect to Settling Velocity, you need Outer Height (H), Settling Velocity (V_s) & Height of Crack (h). With our tool, you need to enter the respective value for Outer Height, Settling Velocity & Height of Crack and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Falling Speed?

In this formula, Falling Speed uses Outer Height, Settling Velocity & Height of Crack. We can use 1 other way(s) to calculate the same, which is/are as follows -

Falling Speed = Outer Height*Discharge/(Length*Width*Height of Crack)

Home

FREE PDFs

🔍 Search