Vertical Depth of Centroid of Area given Specific Force with Top Width Calculator

✖Specific Force in OCF (open channel) is dependent on discharge and cross sectional area.ⓘ Specific Force in OCF [F]			+10% -10%
✖Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area of Channel [A_cs]			+10% -10%
✖Top Width is defined as the width at the top of the section.ⓘ Top Width [T]			+10% -10%

✖Distance from Centroidal is the average distance between all points and the central point.ⓘ Vertical Depth of Centroid of Area given Specific Force with Top Width [Y_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Metering Flumes and Momentum in Open Channel Flow Specific Force Formulas PDF PDF Image

Vertical Depth of Centroid of Area given Specific Force with Top Width Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel
Y_t = (F-(A_cs^2/(T)))/A_cs
This formula uses 4 Variables

Variables Used

Distance from Centroidal - (Measured in Meter) - Distance from Centroidal is the average distance between all points and the central point.
Specific Force in OCF - (Measured in Cubic Meter) - Specific Force in OCF (open channel) is dependent on discharge and cross sectional area.
Cross-Sectional Area of Channel - (Measured in Square Meter) - Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Top Width - (Measured in Meter) - Top Width is defined as the width at the top of the section.

STEP 1: Convert Input(s) to Base Unit

Specific Force in OCF: 410 Cubic Meter --> 410 Cubic Meter No Conversion Required
Cross-Sectional Area of Channel: 15 Square Meter --> 15 Square Meter No Conversion Required
Top Width: 2.1 Meter --> 2.1 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y_t = (F-(A_cs^2/(T)))/A_cs --> (410-(15^2/(2.1)))/15

Evaluating ... ...

Y_t = 20.1904761904762

STEP 3: Convert Result to Output's Unit

20.1904761904762 Meter --> No Conversion Required

FINAL ANSWER

20.1904761904762 ≈ 20.19048 Meter <-- Distance from Centroidal

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Metering Flumes and Momentum in Open Channel Flow Specific Force » Momentum in Open Channel Flow Specific Force » Vertical Depth of Centroid of Area given Specific Force with Top Width

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Momentum in Open Channel Flow Specific Force Calculators

Vertical Depth of Centroid of Area given Specific Force

LaTeX Go Distance from Centroidal = (Specific Force in OCF-(Discharge of Channel*Discharge of Channel/(Cross-Sectional Area of Channel*[g])))/Cross-Sectional Area of Channel

Specific Force

LaTeX Go Specific Force in OCF = (Discharge of Channel*Discharge of Channel/(Cross-Sectional Area of Channel*[g]))+Cross-Sectional Area of Channel*Distance from Centroidal

Vertical Depth of Centroid of Area given Specific Force with Top Width

LaTeX Go Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel

Specific Force given Top Width

LaTeX Go Specific Force in OCF = ((Cross-Sectional Area of Channel^2)/Top Width)+Cross-Sectional Area of Channel*Distance from Centroidal

Vertical Depth of Centroid of Area given Specific Force with Top Width Formula

LaTeX Go

Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel
Y_t = (F-(A_cs^2/(T)))/A_cs

What is Rate of Flow?

In physics and engineering, in particular fluid dynamics, the volumetric flow rate is the volume of fluid which passes per unit time; usually it is represented by the symbol Q. The SI unit is cubic metres per second. Another unit used is standard cubic centimetres per minute. In hydrometry, it is known as discharge.

How to Calculate Vertical Depth of Centroid of Area given Specific Force with Top Width?

Vertical Depth of Centroid of Area given Specific Force with Top Width calculator uses Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel to calculate the Distance from Centroidal, The Vertical Depth of Centroid of Area given Specific Force with Top Width is defined as the distance of centroid of section. Distance from Centroidal is denoted by Y_t symbol.

How to calculate Vertical Depth of Centroid of Area given Specific Force with Top Width using this online calculator? To use this online calculator for Vertical Depth of Centroid of Area given Specific Force with Top Width, enter Specific Force in OCF (F), Cross-Sectional Area of Channel (A_cs) & Top Width (T) and hit the calculate button. Here is how the Vertical Depth of Centroid of Area given Specific Force with Top Width calculation can be explained with given input values -> 118.9692 = (410-(15^2/(2.1)))/15.

FAQ

What is Vertical Depth of Centroid of Area given Specific Force with Top Width?

The Vertical Depth of Centroid of Area given Specific Force with Top Width is defined as the distance of centroid of section and is represented as Y_t = (F-(A_cs^2/(T)))/A_cs or Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel. Specific Force in OCF (open channel) is dependent on discharge and cross sectional area, Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Top Width is defined as the width at the top of the section.

How to calculate Vertical Depth of Centroid of Area given Specific Force with Top Width?

The Vertical Depth of Centroid of Area given Specific Force with Top Width is defined as the distance of centroid of section is calculated using Distance from Centroidal = (Specific Force in OCF-(Cross-Sectional Area of Channel^2/(Top Width)))/Cross-Sectional Area of Channel. To calculate Vertical Depth of Centroid of Area given Specific Force with Top Width, you need Specific Force in OCF (F), Cross-Sectional Area of Channel (A_cs) & Top Width (T). With our tool, you need to enter the respective value for Specific Force in OCF, Cross-Sectional Area of Channel & Top Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Distance from Centroidal?

In this formula, Distance from Centroidal uses Specific Force in OCF, Cross-Sectional Area of Channel & Top Width. We can use 1 other way(s) to calculate the same, which is/are as follows -

Distance from Centroidal = (Specific Force in OCF-(Discharge of Channel*Discharge of Channel/(Cross-Sectional Area of Channel*[g])))/Cross-Sectional Area of Channel

Home

FREE PDFs

🔍 Search