HCF of two numbers

Vessel Beam given Form Drag of Vessel Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Coastal and Ocean Engineering Bridge and Suspension Cable Columns Concrete Formulas More >>

⤿

Surf Zone Hydrodynamics Calculation of Forces on Ocean Structures Density Currents in Harbors Density Currents in Rivers More >>

⤿

Harbor Hydrodynamics Methods to Predict Channel Shoaling Nearshore Currents Surf Zone Waves More >>

⤿

Mooring Important Formulas of Harbor Oscillation Harbor Oscillations Reflection from Structures More >>

⤿

Mooring Forces Important Formulas of Mooring Forces

⤿

Form Drag Propeller Drag Skin Friction

✖Form Drag of a Vessel refers to the resistance experienced by the vessel due to its shape and the flow of water around it.ⓘ Form Drag of a Vessel [F_{c, form}]			+10% -10%
✖Water Density is mass per unit volume of water.ⓘ Water Density [ρ_water]			+10% -10%
✖Form Drag Coefficient is a dimensionless number that quantifies the resistance experienced by an object, such as a coastal structure or seabed feature.ⓘ Form Drag Coefficient [C_{c, form}]			+10% -10%
✖Vessel Draft refers to the vertical distance between the waterline and the lowest point of a ship's hull, usually measured amidships (in the middle of the ship).ⓘ Vessel Draft [T]			+10% -10%
✖Average Current Speed for propeller drag refers to calculating propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions.ⓘ Average Current Speed [V_c]			+10% -10%
✖Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.ⓘ Angle of the Current [θ_c]			+10% -10%

✖Vessel Beam refers to the width of a vessel, such as a ship or boat, measured at its widest point.ⓘ Vessel Beam given Form Drag of Vessel [B]

⎘ Copy

👎

Formula

✖

Vessel Beam given Form Drag of Vessel

Formula

B = \frac{F c, form}{0.5 \cdot ρ water \cdot C c, form \cdot T \cdot {V c}^{2} \cdot \cos (θ c)}

Example

2.136544 m = \frac{0.15 kN}{0.5 \cdot 1000 kg/m³ \cdot 5 \cdot 1.68 m \cdot {728.2461 m/h}^{2} \cdot \cos (1.150)}

Calculator

LaTeX

Reset

👍

Download Surf Zone Hydrodynamics Formula PDF PDF Image

Vessel Beam given Form Drag of Vessel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Vessel Beam = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Draft*Average Current Speed^2*cos(Angle of the Current))
B = F_{c, form}/(0.5*ρ_water*C_{c, form}*T*V_c^2*cos(θ_c))
This formula uses 1 Functions, 7 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Vessel Beam - (Measured in Meter) - Vessel Beam refers to the width of a vessel, such as a ship or boat, measured at its widest point.
Form Drag of a Vessel - (Measured in Newton) - Form Drag of a Vessel refers to the resistance experienced by the vessel due to its shape and the flow of water around it.
Water Density - (Measured in Kilogram per Cubic Meter) - Water Density is mass per unit volume of water.
Form Drag Coefficient - Form Drag Coefficient is a dimensionless number that quantifies the resistance experienced by an object, such as a coastal structure or seabed feature.
Vessel Draft - (Measured in Meter) - Vessel Draft refers to the vertical distance between the waterline and the lowest point of a ship's hull, usually measured amidships (in the middle of the ship).
Average Current Speed - (Measured in Meter per Second) - Average Current Speed for propeller drag refers to calculating propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions.
Angle of the Current - Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.

STEP 1: Convert Input(s) to Base Unit

Form Drag of a Vessel: 0.15 Kilonewton --> 150 Newton (Check conversion here)
Water Density: 1000 Kilogram per Cubic Meter --> 1000 Kilogram per Cubic Meter No Conversion Required
Form Drag Coefficient: 5 --> No Conversion Required
Vessel Draft: 1.68 Meter --> 1.68 Meter No Conversion Required
Average Current Speed: 728.2461 Meter per Hour --> 0.202290583333333 Meter per Second (Check conversion here)
Angle of the Current: 1.15 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

B = F_{c, form}/(0.5*ρ_water*C_{c, form}*T*V_c^2*cos(θ_c)) --> 150/(0.5*1000*5*1.68*0.202290583333333^2*cos(1.15))

Evaluating ... ...

B = 2.1365444208452

STEP 3: Convert Result to Output's Unit

2.1365444208452 Meter --> No Conversion Required

FINAL ANSWER

2.1365444208452 ≈ 2.136544 Meter <-- Vessel Beam

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Harbor Hydrodynamics » Mooring » Mooring Forces » Form Drag » Vessel Beam given Form Drag of Vessel

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Form Drag Calculators

Form Drag Coefficient given Form Drag of Vessel

Go Form Drag Coefficient = Form Drag of a Vessel/(0.5*Water Density*Vessel Beam*Vessel Draft*Average Current Speed^2*cos(Angle of the Current))

Vessel Draft given Form Drag of Vessel

Go Vessel Draft = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Beam*Average Current Speed^2*cos(Angle of the Current))

Vessel Beam given Form Drag of Vessel

Go Vessel Beam = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Draft*Average Current Speed^2*cos(Angle of the Current))

Form Drag of Vessel given Total Longitudinal Current Load on Vessel

Go Form Drag of a Vessel = Total Longitudinal Current Load on a Vessel-Skin Friction of a Vessel-Vessel Propeller Drag

Vessel Beam given Form Drag of Vessel Formula

What is Mooring in Shipping?

Mooring is a procedure to anchor the ship to a fixed or floating element and keep it connected during loading or unloading operations. Safe mooring must withstand several forces, such as wind, the current, the tide and waves.

How to Calculate Vessel Beam given Form Drag of Vessel?

Vessel Beam given Form Drag of Vessel calculator uses Vessel Beam = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Draft*Average Current Speed^2*cos(Angle of the Current)) to calculate the Vessel Beam, The Vessel Beam given Form Drag of Vessel formula is defined as the width of a vessel at its widest point. In naval architecture, beam is a critical dimension as it influences stability, maneuverability, and internal space allocation of the vessel. Vessel Beam is denoted by B symbol.

How to calculate Vessel Beam given Form Drag of Vessel using this online calculator? To use this online calculator for Vessel Beam given Form Drag of Vessel, enter Form Drag of a Vessel (F_{c, form}), Water Density (ρ_water), Form Drag Coefficient (C_{c, form}), Vessel Draft (T), Average Current Speed (V_c) & Angle of the Current (θ_c) and hit the calculate button. Here is how the Vessel Beam given Form Drag of Vessel calculation can be explained with given input values -> 2.136544 = 150/(0.5*1000*5*1.68*0.202290583333333^2*cos(1.15)).

FAQ

What is Vessel Beam given Form Drag of Vessel?

The Vessel Beam given Form Drag of Vessel formula is defined as the width of a vessel at its widest point. In naval architecture, beam is a critical dimension as it influences stability, maneuverability, and internal space allocation of the vessel and is represented as B = F_{c, form}/(0.5*ρ_water*C_{c, form}*T*V_c^2*cos(θ_c)) or Vessel Beam = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Draft*Average Current Speed^2*cos(Angle of the Current)). Form Drag of a Vessel refers to the resistance experienced by the vessel due to its shape and the flow of water around it, Water Density is mass per unit volume of water, Form Drag Coefficient is a dimensionless number that quantifies the resistance experienced by an object, such as a coastal structure or seabed feature, Vessel Draft refers to the vertical distance between the waterline and the lowest point of a ship's hull, usually measured amidships (in the middle of the ship), Average Current Speed for propeller drag refers to calculating propeller drag in water depending on factors, including the type of vessel, size and shape of propeller, and operating conditions & Angle of the Current refers to the direction at which ocean currents or tidal flows approach a coastline or a coastal structure, relative to a defined reference direction.

How to calculate Vessel Beam given Form Drag of Vessel?

The Vessel Beam given Form Drag of Vessel formula is defined as the width of a vessel at its widest point. In naval architecture, beam is a critical dimension as it influences stability, maneuverability, and internal space allocation of the vessel is calculated using Vessel Beam = Form Drag of a Vessel/(0.5*Water Density*Form Drag Coefficient*Vessel Draft*Average Current Speed^2*cos(Angle of the Current)). To calculate Vessel Beam given Form Drag of Vessel, you need Form Drag of a Vessel (F_{c, form}), Water Density (ρ_water), Form Drag Coefficient (C_{c, form}), Vessel Draft (T), Average Current Speed (V_c) & Angle of the Current (θ_c). With our tool, you need to enter the respective value for Form Drag of a Vessel, Water Density, Form Drag Coefficient, Vessel Draft, Average Current Speed & Angle of the Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search