Velocity of Moving Plate in Terms of Absolute Viscosity Calculator

✖Tangential force on moving plate is the force that acts on a moving plate that is sliding onto a oiled surface.ⓘ Tangential force on moving plate [P]			+10% -10%
✖Oil film thickness is defined as the thickness of the oil film between the two parts in relative motion.ⓘ Oil film thickness [h]			+10% -10%
✖Dynamic viscosity of oil is the resistance to movement of one layer of fluid over another.ⓘ Dynamic viscosity of oil [μ_o]			+10% -10%
✖Area of moving plate on oil is the amount of two-dimensional space of the plate that is in contact with the oil film.ⓘ Area of moving plate on oil [A_po]			+10% -10%

✖Velocity of Moving Plate on Oil is the velocity of the plate with respect to fixed plate moving on the oily surface.ⓘ Velocity of Moving Plate in Terms of Absolute Viscosity [V_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Velocity of Moving Plate in Terms of Absolute Viscosity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil)
V_m = P*h/(μ_o*A_po)
This formula uses 5 Variables

Variables Used

Velocity of Moving Plate on Oil - (Measured in Meter per Second) - Velocity of Moving Plate on Oil is the velocity of the plate with respect to fixed plate moving on the oily surface.
Tangential force on moving plate - (Measured in Newton) - Tangential force on moving plate is the force that acts on a moving plate that is sliding onto a oiled surface.
Oil film thickness - (Measured in Meter) - Oil film thickness is defined as the thickness of the oil film between the two parts in relative motion.
Dynamic viscosity of oil - (Measured in Pascal Second) - Dynamic viscosity of oil is the resistance to movement of one layer of fluid over another.
Area of moving plate on oil - (Measured in Square Meter) - Area of moving plate on oil is the amount of two-dimensional space of the plate that is in contact with the oil film.

STEP 1: Convert Input(s) to Base Unit

Tangential force on moving plate: 214 Newton --> 214 Newton No Conversion Required
Oil film thickness: 0.02 Millimeter --> 2E-05 Meter (Check conversion here)
Dynamic viscosity of oil: 490 Centipoise --> 0.49 Pascal Second (Check conversion here)
Area of moving plate on oil: 1750 Square Millimeter --> 0.00175 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_m = P*h/(μ_o*A_po) --> 214*2E-05/(0.49*0.00175)

Evaluating ... ...

V_m = 4.99125364431487

STEP 3: Convert Result to Output's Unit

4.99125364431487 Meter per Second --> No Conversion Required

FINAL ANSWER

4.99125364431487 ≈ 4.991254 Meter per Second <-- Velocity of Moving Plate on Oil

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Sliding Contact Bearing » Viscosity and Density of Lubricant » Velocity of Moving Plate in Terms of Absolute Viscosity

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Viscosity and Density of Lubricant Calculators

Area of moving plate of sliding contact bearing given absolute viscosity

LaTeX Go Area of moving plate on oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Velocity of Moving Plate on Oil)

Velocity of Moving Plate in Terms of Absolute Viscosity

LaTeX Go Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil)

Absolute Viscosity of Oil in Terms of Tangential Force

LaTeX Go Dynamic viscosity of oil = Tangential force on moving plate*Oil film thickness/(Area of moving plate on oil*Velocity of Moving Plate on Oil)

Kinematic Viscosity in Centi-Stokes in Terms of Viscosity in Saybolt's Unversal Seconds

LaTeX Go Kinematic Viscosity in Centi-Stokes = (0.22*Viscosity in Saybolt Universal Seconds)-(180/Viscosity in Saybolt Universal Seconds)

Velocity of Moving Plate in Terms of Absolute Viscosity Formula

LaTeX Go

Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil)
V_m = P*h/(μ_o*A_po)

What is Sliding Contact Bearing?

The sliding contact bearings in which the sliding action is along the circumference of a circle or an arc of a circle and carrying radial loads are known as journal or sleeve bearings.

How to Calculate Velocity of Moving Plate in Terms of Absolute Viscosity?

Velocity of Moving Plate in Terms of Absolute Viscosity calculator uses Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil) to calculate the Velocity of Moving Plate on Oil, The Velocity of Moving Plate in Terms of Absolute Viscosity formula is defined as the ratio of the product of tangential force and film thickness to the product of absolute viscosity and area. Velocity of Moving Plate on Oil is denoted by V_m symbol.

How to calculate Velocity of Moving Plate in Terms of Absolute Viscosity using this online calculator? To use this online calculator for Velocity of Moving Plate in Terms of Absolute Viscosity, enter Tangential force on moving plate (P), Oil film thickness (h), Dynamic viscosity of oil (μ_o) & Area of moving plate on oil (A_po) and hit the calculate button. Here is how the Velocity of Moving Plate in Terms of Absolute Viscosity calculation can be explained with given input values -> 4.991254 = 214*2E-05/(0.49*0.00175).

FAQ

What is Velocity of Moving Plate in Terms of Absolute Viscosity?

The Velocity of Moving Plate in Terms of Absolute Viscosity formula is defined as the ratio of the product of tangential force and film thickness to the product of absolute viscosity and area and is represented as V_m = P*h/(μ_o*A_po) or Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil). Tangential force on moving plate is the force that acts on a moving plate that is sliding onto a oiled surface, Oil film thickness is defined as the thickness of the oil film between the two parts in relative motion, Dynamic viscosity of oil is the resistance to movement of one layer of fluid over another & Area of moving plate on oil is the amount of two-dimensional space of the plate that is in contact with the oil film.

How to calculate Velocity of Moving Plate in Terms of Absolute Viscosity?

The Velocity of Moving Plate in Terms of Absolute Viscosity formula is defined as the ratio of the product of tangential force and film thickness to the product of absolute viscosity and area is calculated using Velocity of Moving Plate on Oil = Tangential force on moving plate*Oil film thickness/(Dynamic viscosity of oil*Area of moving plate on oil). To calculate Velocity of Moving Plate in Terms of Absolute Viscosity, you need Tangential force on moving plate (P), Oil film thickness (h), Dynamic viscosity of oil (μ_o) & Area of moving plate on oil (A_po). With our tool, you need to enter the respective value for Tangential force on moving plate, Oil film thickness, Dynamic viscosity of oil & Area of moving plate on oil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search