HCF of three numbers

Velocity at Desired Elevation Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Coastal and Ocean Engineering Bridge and Suspension Cable Columns Concrete Formulas More >>

⤿

Surf Zone Hydrodynamics Calculation of Forces on Ocean Structures Density Currents in Harbors Density Currents in Rivers More >>

⤿

Harbor Hydrodynamics Methods to Predict Channel Shoaling Nearshore Currents Surf Zone Waves More >>

⤿

Mooring Important Formulas of Harbor Oscillation Harbor Oscillations Reflection from Structures More >>

⤿

Mooring Forces Important Formulas of Mooring Forces

⤿

Form Drag Propeller Drag Skin Friction

✖Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.ⓘ Wind Speed at Height of 10 m [V₁₀]			+10% -10%
✖Desired Elevation is a specified vertical position or height above a reference level that is targeted or required for various structures.ⓘ Desired Elevation [z]			+10% -10%

✖Velocity at the Desired Elevation z depends on the wind speed at a height of 10m and the desired elevation.ⓘ Velocity at Desired Elevation [V_z]

⎘ Copy

👎

Formula

✖

Velocity at Desired Elevation

Formula

V z = V 10 \cdot {(\frac{z}{10})}^{0.11}

Example

28.62584 m/s = 22 m/s \cdot {(\frac{109.50 m}{10})}^{0.11}

Calculator

LaTeX

Reset

👍

Download Surf Zone Hydrodynamics Formula PDF PDF Image

Velocity at Desired Elevation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Velocity at the Desired Elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11
V_z = V₁₀*(z/10)^0.11
This formula uses 3 Variables

Variables Used

Velocity at the Desired Elevation z - (Measured in Meter per Second) - Velocity at the Desired Elevation z depends on the wind speed at a height of 10m and the desired elevation.
Wind Speed at Height of 10 m - (Measured in Meter per Second) - Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.
Desired Elevation - (Measured in Meter) - Desired Elevation is a specified vertical position or height above a reference level that is targeted or required for various structures.

STEP 1: Convert Input(s) to Base Unit

Wind Speed at Height of 10 m: 22 Meter per Second --> 22 Meter per Second No Conversion Required
Desired Elevation: 109.5 Meter --> 109.5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_z = V₁₀*(z/10)^0.11 --> 22*(109.5/10)^0.11

Evaluating ... ...

V_z = 28.6258396314474

STEP 3: Convert Result to Output's Unit

28.6258396314474 Meter per Second --> No Conversion Required

FINAL ANSWER

28.6258396314474 ≈ 28.62584 Meter per Second <-- Velocity at the Desired Elevation z

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Harbor Hydrodynamics » Mooring » Mooring Forces » Velocity at Desired Elevation

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Mooring Forces Calculators

Coefficient of Drag for Winds Measured at 10 m given Drag Force due to Wind

Go Coefficient of Drag = Drag Force/(0.5*Air Density*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)

Projected Area of Vessel above Waterline given Drag Force due to Wind

Go Projected Area of the Vessel = Drag Force/(0.5*Air Density*Coefficient of Drag*Wind Speed at Height of 10 m^2)

Mass Density of Air given Drag Force due to Wind

Go Air Density = Drag Force/(0.5*Coefficient of Drag*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)

Drag Force due to Wind

Go Drag Force = 0.5*Air Density*Coefficient of Drag*Projected Area of the Vessel*Wind Speed at Height of 10 m^2

< Important Formulas of Mooring Forces Calculators

Undamped Natural Period of Vessel

Go Undamped Natural Period of a Vessel = 2*pi*(sqrt(Virtual Mass of the Ship/Effective Spring Constant))

Individual Stiffness of Mooring Line

Go Individual Mooring Line Stiffness = Axial Tension or Load on a Mooring Line/Elongation in the Mooring Line

Mass of Vessel given Virtual Mass of Vessel

Go Mass of a Vessel = Virtual Mass of the Ship-Mass of Vessel due to Inertial Effects

Virtual Mass of Vessel

Go Virtual Mass of the Ship = Mass of a Vessel+Mass of Vessel due to Inertial Effects

Velocity at Desired Elevation Formula

Velocity at the Desired Elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11
V_z = V₁₀*(z/10)^0.11

What Factors Affect Drag?

Drag is influenced by other factors including shape, texture, viscosity (which results in viscous drag or skin friction ), compressibility, lift (which causes induced drag ), boundary layer separation, and so on

How to Calculate Velocity at Desired Elevation?

Velocity at Desired Elevation calculator uses Velocity at the Desired Elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11 to calculate the Velocity at the Desired Elevation z, The Velocity at Desired Elevation formula is defined as the velocity of water at a desired elevation within a flow profile, it’s essential to understand the type of flow and the relevant conditions. Velocity at the Desired Elevation z is denoted by V_z symbol.

How to calculate Velocity at Desired Elevation using this online calculator? To use this online calculator for Velocity at Desired Elevation, enter Wind Speed at Height of 10 m (V₁₀) & Desired Elevation (z) and hit the calculate button. Here is how the Velocity at Desired Elevation calculation can be explained with given input values -> 28.62584 = 22*(109.5/10)^0.11.

FAQ

What is Velocity at Desired Elevation?

The Velocity at Desired Elevation formula is defined as the velocity of water at a desired elevation within a flow profile, it’s essential to understand the type of flow and the relevant conditions and is represented as V_z = V₁₀*(z/10)^0.11 or Velocity at the Desired Elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11. Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration & Desired Elevation is a specified vertical position or height above a reference level that is targeted or required for various structures.

How to calculate Velocity at Desired Elevation?

The Velocity at Desired Elevation formula is defined as the velocity of water at a desired elevation within a flow profile, it’s essential to understand the type of flow and the relevant conditions is calculated using Velocity at the Desired Elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11. To calculate Velocity at Desired Elevation, you need Wind Speed at Height of 10 m (V₁₀) & Desired Elevation (z). With our tool, you need to enter the respective value for Wind Speed at Height of 10 m & Desired Elevation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search