Velocity at Depth1 when Surge Height is Negligible Calculator

✖Height of Channel is the distance between the lowest and highest points of a person/ shape/ object standing upright.ⓘ Height of Channel [H_ch]			+10% -10%
✖Celerity of Wave is the addition to the normal water velocity of the channels.ⓘ Celerity of Wave [C_w]			+10% -10%
✖Velocity of Fluid at 2 is defined as the velocity of the flowing liquid at point 1.ⓘ Velocity of Fluid at 2 [V₂]			+10% -10%

✖Velocity of Fluid at Negative Surges is defined as the velocity of the flowing liquid at a Negative Surges.ⓘ Velocity at Depth1 when Surge Height is Negligible [V_{Negativesurges}]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Non uniform Flow in Channels Formula PDF PDF Image

Velocity at Depth1 when Surge Height is Negligible Solution

STEP 0: Pre-Calculation Summary

Formula Used

Velocity of Fluid at Negative Surges = (Height of Channel*[g]/Celerity of Wave)+Velocity of Fluid at 2
V_{Negativesurges} = (H_ch*[g]/C_w)+V₂
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Velocity of Fluid at Negative Surges - (Measured in Meter per Second) - Velocity of Fluid at Negative Surges is defined as the velocity of the flowing liquid at a Negative Surges.
Height of Channel - (Measured in Meter) - Height of Channel is the distance between the lowest and highest points of a person/ shape/ object standing upright.
Celerity of Wave - (Measured in Meter per Second) - Celerity of Wave is the addition to the normal water velocity of the channels.
Velocity of Fluid at 2 - (Measured in Meter per Second) - Velocity of Fluid at 2 is defined as the velocity of the flowing liquid at point 1.

STEP 1: Convert Input(s) to Base Unit

Height of Channel: 12.01 Meter --> 12.01 Meter No Conversion Required
Celerity of Wave: 5.4 Meter per Second --> 5.4 Meter per Second No Conversion Required
Velocity of Fluid at 2: 5 Meter per Second --> 5 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_{Negativesurges} = (H_ch*[g]/C_w)+V₂ --> (12.01*[g]/5.4)+5

Evaluating ... ...

V_{Negativesurges} = 26.8107160185185

STEP 3: Convert Result to Output's Unit

26.8107160185185 Meter per Second --> No Conversion Required

FINAL ANSWER

26.8107160185185 ≈ 26.81072 Meter per Second <-- Velocity of Fluid at Negative Surges

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Non uniform Flow in Channels » Surges in Open Channel Flow » Negative Surges » Velocity at Depth1 when Surge Height is Negligible

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Negative Surges Calculators

Velocity of Flow given Absolute Velocity of Surges

LaTeX Go Mean velocity = sqrt([g]*Depth of Flow)-Absolute Velocity of Issuing Jet

Absolute Velocity of Surges

LaTeX Go Absolute Velocity of Issuing Jet = sqrt([g]*Depth of Flow)-Mean velocity

Absolute Velocity of Surges for given Depth of flow

LaTeX Go Absolute Velocity of Issuing Jet = Celerity of Wave+Mean velocity

Celerity of Wave Given Absolute Velocity of Surges

LaTeX Go Celerity of Wave = Absolute Velocity of Issuing Jet-Mean velocity

Velocity at Depth1 when Surge Height is Negligible Formula

LaTeX Go

Velocity of Fluid at Negative Surges = (Height of Channel*[g]/Celerity of Wave)+Velocity of Fluid at 2
V_{Negativesurges} = (H_ch*[g]/C_w)+V₂

What are Surges?

Surges, or transients, are brief overvoltage spikes or disturbances on a power waveform that can damage, degrade, or destroy electronic equipment within any home, commercial building, industrial, or manufacturing facility. Transients can reach amplitudes of tens of thousands of volts.

How to Calculate Velocity at Depth1 when Surge Height is Negligible?

Velocity at Depth1 when Surge Height is Negligible calculator uses Velocity of Fluid at Negative Surges = (Height of Channel*[g]/Celerity of Wave)+Velocity of Fluid at 2 to calculate the Velocity of Fluid at Negative Surges, The Velocity at Depth1 when surge height is negligible formula is defined as velocity of flow surge at a point. Velocity of Fluid at Negative Surges is denoted by V_{Negativesurges} symbol.

How to calculate Velocity at Depth1 when Surge Height is Negligible using this online calculator? To use this online calculator for Velocity at Depth1 when Surge Height is Negligible, enter Height of Channel (H_ch), Celerity of Wave (C_w) & Velocity of Fluid at 2 (V₂) and hit the calculate button. Here is how the Velocity at Depth1 when Surge Height is Negligible calculation can be explained with given input values -> 24.31072 = (12.01*[g]/5.4)+5.

FAQ

What is Velocity at Depth1 when Surge Height is Negligible?

The Velocity at Depth1 when surge height is negligible formula is defined as velocity of flow surge at a point and is represented as V_{Negativesurges} = (H_ch*[g]/C_w)+V₂ or Velocity of Fluid at Negative Surges = (Height of Channel*[g]/Celerity of Wave)+Velocity of Fluid at 2. Height of Channel is the distance between the lowest and highest points of a person/ shape/ object standing upright, Celerity of Wave is the addition to the normal water velocity of the channels & Velocity of Fluid at 2 is defined as the velocity of the flowing liquid at point 1.

How to calculate Velocity at Depth1 when Surge Height is Negligible?

The Velocity at Depth1 when surge height is negligible formula is defined as velocity of flow surge at a point is calculated using Velocity of Fluid at Negative Surges = (Height of Channel*[g]/Celerity of Wave)+Velocity of Fluid at 2. To calculate Velocity at Depth1 when Surge Height is Negligible, you need Height of Channel (H_ch), Celerity of Wave (C_w) & Velocity of Fluid at 2 (V₂). With our tool, you need to enter the respective value for Height of Channel, Celerity of Wave & Velocity of Fluid at 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Velocity of Fluid at Negative Surges?

In this formula, Velocity of Fluid at Negative Surges uses Height of Channel, Celerity of Wave & Velocity of Fluid at 2. We can use 1 other way(s) to calculate the same, which is/are as follows -

Velocity of Fluid at Negative Surges = ((Absolute Velocity of Issuing Jet*(Depth of Point 1-Depth of Point 2))+(Velocity of Fluid at 2*Depth of Point 2))/Depth of Point 1

Home

FREE PDFs

🔍 Search