Velocity of Sphere given Drag Force Calculator

✖Drag Force is the resisting force experienced by an object moving through a fluid.ⓘ Drag Force [F_D]			+10% -10%
✖The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing.ⓘ Cross Sectional Area of Pipe [A]			+10% -10%
✖The Coefficient of Drag is a dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.ⓘ Coefficient of Drag [C_D]			+10% -10%
✖Density of Fluid is the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.ⓘ Density of Fluid [ρ]			+10% -10%

✖Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.ⓘ Velocity of Sphere given Drag Force [V_mean]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Laminar Flow around a Sphere Stokes’ Law Formulas PDF PDF Image

Velocity of Sphere given Drag Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mean Velocity = sqrt(Drag Force/(Cross Sectional Area of Pipe*Coefficient of Drag*Density of Fluid*0.5))
V_mean = sqrt(F_D/(A*C_D*ρ*0.5))
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Mean Velocity - (Measured in Meter per Second) - Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.
Drag Force - (Measured in Newton) - Drag Force is the resisting force experienced by an object moving through a fluid.
Cross Sectional Area of Pipe - (Measured in Square Meter) - The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing.
Coefficient of Drag - The Coefficient of Drag is a dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.

STEP 1: Convert Input(s) to Base Unit

Drag Force: 1.1 Kilonewton --> 1100 Newton (Check conversion here)
Cross Sectional Area of Pipe: 2 Square Meter --> 2 Square Meter No Conversion Required
Coefficient of Drag: 0.01 --> No Conversion Required
Density of Fluid: 1000 Kilogram per Cubic Meter --> 1000 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_mean = sqrt(F_D/(A*C_D*ρ*0.5)) --> sqrt(1100/(2*0.01*1000*0.5))

Evaluating ... ...

V_mean = 10.4880884817015

STEP 3: Convert Result to Output's Unit

10.4880884817015 Meter per Second --> No Conversion Required

FINAL ANSWER

10.4880884817015 ≈ 10.48809 Meter per Second <-- Mean Velocity

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Laminar Flow » Laminar Flow around a Sphere Stokes’ Law » Velocity of Sphere given Drag Force

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Laminar Flow around a Sphere Stokes’ Law Calculators

Dynamic Viscosity of fluid given Resistance Force on Spherical Surface

LaTeX Go Dynamic Viscosity = Resistance Force/(3*pi*Diameter of Sphere*Mean Velocity)

Diameter of Sphere given Resistance Force on Spherical Surface

LaTeX Go Diameter of Sphere = Resistance Force/(3*pi*Dynamic Viscosity*Mean Velocity)

Velocity of Sphere given Resistance Force on Spherical Surface

LaTeX Go Mean Velocity = Resistance Force/(3*pi*Dynamic Viscosity*Diameter of Sphere)

Resistance Force on Spherical Surface

LaTeX Go Resistance Force = 3*pi*Dynamic Viscosity*Mean Velocity*Diameter of Sphere

Velocity of Sphere given Drag Force Formula

LaTeX Go

Mean Velocity = sqrt(Drag Force/(Cross Sectional Area of Pipe*Coefficient of Drag*Density of Fluid*0.5))
V_mean = sqrt(F_D/(A*C_D*ρ*0.5))

What is Terminal Velocity?

Terminal velocity is the maximum velocity attainable by an object as it falls through a fluid (air is the most common example). It occurs when the sum of the drag force (Fd) and the buoyancy is equal to the downward force of gravity (FG) acting on the object.

How to Calculate Velocity of Sphere given Drag Force?

Velocity of Sphere given Drag Force calculator uses Mean Velocity = sqrt(Drag Force/(Cross Sectional Area of Pipe*Coefficient of Drag*Density of Fluid*0.5)) to calculate the Mean Velocity, The Velocity of Sphere given Drag Force is defined as the terminal velocity attained by object in flow medium. Mean Velocity is denoted by V_mean symbol.

How to calculate Velocity of Sphere given Drag Force using this online calculator? To use this online calculator for Velocity of Sphere given Drag Force, enter Drag Force (F_D), Cross Sectional Area of Pipe (A), Coefficient of Drag (C_D) & Density of Fluid (ρ) and hit the calculate button. Here is how the Velocity of Sphere given Drag Force calculation can be explained with given input values -> 52.91503 = sqrt(1100/(2*0.01*1000*0.5)).

FAQ

What is Velocity of Sphere given Drag Force?

The Velocity of Sphere given Drag Force is defined as the terminal velocity attained by object in flow medium and is represented as V_mean = sqrt(F_D/(A*C_D*ρ*0.5)) or Mean Velocity = sqrt(Drag Force/(Cross Sectional Area of Pipe*Coefficient of Drag*Density of Fluid*0.5)). Drag Force is the resisting force experienced by an object moving through a fluid, The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing, The Coefficient of Drag is a dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water & Density of Fluid is the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.

How to calculate Velocity of Sphere given Drag Force?

The Velocity of Sphere given Drag Force is defined as the terminal velocity attained by object in flow medium is calculated using Mean Velocity = sqrt(Drag Force/(Cross Sectional Area of Pipe*Coefficient of Drag*Density of Fluid*0.5)). To calculate Velocity of Sphere given Drag Force, you need Drag Force (F_D), Cross Sectional Area of Pipe (A), Coefficient of Drag (C_D) & Density of Fluid (ρ). With our tool, you need to enter the respective value for Drag Force, Cross Sectional Area of Pipe, Coefficient of Drag & Density of Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Mean Velocity?

In this formula, Mean Velocity uses Drag Force, Cross Sectional Area of Pipe, Coefficient of Drag & Density of Fluid. We can use 2 other way(s) to calculate the same, which is/are as follows -

Mean Velocity = Resistance Force/(3*pi*Dynamic Viscosity*Diameter of Sphere)
Mean Velocity = (24*Dynamic Viscosity)/(Density of Fluid*Coefficient of Drag*Diameter of Sphere)

Home

FREE PDFs

🔍 Search