Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model Calculator

✖Inertia Forces are the forces that keep fluid moving against viscous [ viscosity] forces.ⓘ Inertia Forces [F_i]			+10% -10%
✖The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity [μ_viscosity]			+10% -10%
✖Viscous Force is force due to viscosity.ⓘ Viscous Force [F_v]			+10% -10%
✖Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.ⓘ Density of Fluid [ρ_fluid]			+10% -10%
✖Characteristic length is the linear dimension expressed in physical model relationships between prototype and model.ⓘ Characteristic length [L]			+10% -10%

✖Velocity of Fluid is the vector field that is used to describe fluid motion in a mathematical manner.ⓘ Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model [V_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Relation between Forces on the Prototype and Forces on the Model Formulas PDF PDF Image

Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model Solution

STEP 0: Pre-Calculation Summary

Formula Used

Velocity of Fluid = (Inertia Forces*Dynamic Viscosity)/(Viscous Force*Density of Fluid*Characteristic length)
V_f = (F_i*μ_viscosity)/(F_v*ρ_fluid*L)
This formula uses 6 Variables

Variables Used

Velocity of Fluid - (Measured in Meter per Second) - Velocity of Fluid is the vector field that is used to describe fluid motion in a mathematical manner.
Inertia Forces - (Measured in Newton) - Inertia Forces are the forces that keep fluid moving against viscous [ viscosity] forces.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.
Viscous Force - (Measured in Newton) - Viscous Force is force due to viscosity.
Density of Fluid - (Measured in Kilogram per Cubic Meter) - Density of Fluid is defined as the mass of fluid per unit volume of the said fluid.
Characteristic length - (Measured in Meter) - Characteristic length is the linear dimension expressed in physical model relationships between prototype and model.

STEP 1: Convert Input(s) to Base Unit

Inertia Forces: 3.636 Kilonewton --> 3636 Newton (Check conversion here)
Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)
Viscous Force: 0.0504 Kilonewton --> 50.4 Newton (Check conversion here)
Density of Fluid: 1.225 Kilogram per Cubic Meter --> 1.225 Kilogram per Cubic Meter No Conversion Required
Characteristic length: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_f = (F_i*μ_viscosity)/(F_v*ρ_fluid*L) --> (3636*1.02)/(50.4*1.225*3)

Evaluating ... ...

V_f = 20.0233236151604

STEP 3: Convert Result to Output's Unit

20.0233236151604 Meter per Second --> No Conversion Required

FINAL ANSWER

20.0233236151604 ≈ 20.02332 Meter per Second <-- Velocity of Fluid

(Calculation completed in 00.023 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Offshore Hydromechanics » Dimensionless Ratios and Scaling Laws » Relation between Forces on the Prototype and Forces on the Model » Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Relation between Forces on the Prototype and Forces on the Model Calculators

Relation between Forces on Prototype and Forces on Model

LaTeX Go Force on Prototype = Scale Factor for Density of Fluid*(Scale Factor for Velocity^2)*(Scale Factor for Length^2)*Force on Model

Scale Factor for Inertia Forces given Force on Prototype

LaTeX Go Scale Factor for Inertia Forces = Force on Prototype/Force on Model

Force on Model given Force on Prototype

LaTeX Go Force on Model = Force on Prototype/Scale Factor for Inertia Forces

Force on Prototype

LaTeX Go Force on Prototype = Scale Factor for Inertia Forces*Force on Model

Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model Formula

LaTeX Go

Velocity of Fluid = (Inertia Forces*Dynamic Viscosity)/(Viscous Force*Density of Fluid*Characteristic length)
V_f = (F_i*μ_viscosity)/(F_v*ρ_fluid*L)

What is Viscous Force?

The viscosity of a fluid is a measure of its resistance to deformation at a given rate. For liquids, it corresponds to the informal concept of "thickness": for example, syrup has a higher viscosity than water. The viscous force is the force between a body and a fluid (liquid or gas) moving past it, in a direction so as to oppose the flow of the fluid past the object.

Define Inertial force

The force that keeps fluid moving against viscous [ viscosity] forces is the inertial force. The inertial forces are characterized by the product of the density rho times the velocity V times the gradient of the velocity dV/dx.

How to Calculate Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model?

Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model calculator uses Velocity of Fluid = (Inertia Forces*Dynamic Viscosity)/(Viscous Force*Density of Fluid*Characteristic length) to calculate the Velocity of Fluid, The Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model is expressed using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters. Velocity of Fluid is denoted by V_f symbol.

How to calculate Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model using this online calculator? To use this online calculator for Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model, enter Inertia Forces (F_i), Dynamic Viscosity (μ_viscosity), Viscous Force (F_v), Density of Fluid (ρ_fluid) & Characteristic length (L) and hit the calculate button. Here is how the Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model calculation can be explained with given input values -> 20.02332 = (3636*1.02)/(50.4*1.225*3).

FAQ

What is Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model?

The Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model is expressed using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters and is represented as V_f = (F_i*μ_viscosity)/(F_v*ρ_fluid*L) or Velocity of Fluid = (Inertia Forces*Dynamic Viscosity)/(Viscous Force*Density of Fluid*Characteristic length). Inertia Forces are the forces that keep fluid moving against viscous [ viscosity] forces, The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied, Viscous Force is force due to viscosity, Density of Fluid is defined as the mass of fluid per unit volume of the said fluid & Characteristic length is the linear dimension expressed in physical model relationships between prototype and model.

How to calculate Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model?

The Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model is expressed using Newton’s friction model while the inertia forces (from above) are proportional to the respective parameters is calculated using Velocity of Fluid = (Inertia Forces*Dynamic Viscosity)/(Viscous Force*Density of Fluid*Characteristic length). To calculate Velocity given Ratio of Inertial Forces and Viscous Forces using Newton's Friction model, you need Inertia Forces (F_i), Dynamic Viscosity (μ_viscosity), Viscous Force (F_v), Density of Fluid (ρ_fluid) & Characteristic length (L). With our tool, you need to enter the respective value for Inertia Forces, Dynamic Viscosity, Viscous Force, Density of Fluid & Characteristic length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Velocity of Fluid?

In this formula, Velocity of Fluid uses Inertia Forces, Dynamic Viscosity, Viscous Force, Density of Fluid & Characteristic length. We can use 1 other way(s) to calculate the same, which is/are as follows -

Velocity of Fluid = (Inertia Forces*Kinematic Viscosity for Model Analysis)/(Viscous Force*Characteristic length)

Home

FREE PDFs

🔍 Search