Velocity given Force Exerted by Jet on Vane in Y Direction Calculator

✖Force Exerted by Fluid Jet in Y is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity.ⓘ Force Exerted by Fluid Jet in Y [F_y]			+10% -10%
✖The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration due to Gravity [g]			+10% -10%
✖The Specific Weight of Liquid refers to the weight per unit volume of that substance.ⓘ Specific Weight of Liquid [γ_f]			+10% -10%
✖Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross Sectional Area of Jet [A_Jet]			+10% -10%
✖Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.ⓘ Theta [θ]			+10% -10%
✖Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.ⓘ Angle between Jet and Plate [∠D]			+10% -10%

✖Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.ⓘ Velocity given Force Exerted by Jet on Vane in Y Direction [v_jet]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Impact of Free Jets Formula PDF PDF Image

Velocity given Force Exerted by Jet on Vane in Y Direction Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fluid Jet Velocity = sqrt((Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*((sin(Theta))-sin(Angle between Jet and Plate))))
v_jet = sqrt((F_y*g)/(γ_f*A_Jet*((sin(θ))-sin(∠D))))
This formula uses 2 Functions, 7 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Fluid Jet Velocity - (Measured in Meter per Second) - Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.
Force Exerted by Fluid Jet in Y - (Measured in Newton) - Force Exerted by Fluid Jet in Y is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity.
Acceleration due to Gravity - (Measured in Meter per Square Second) - The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
Specific Weight of Liquid - (Measured in Kilonewton per Cubic Meter) - The Specific Weight of Liquid refers to the weight per unit volume of that substance.
Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Theta - (Measured in Radian) - Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
Angle between Jet and Plate - (Measured in Radian) - Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

STEP 1: Convert Input(s) to Base Unit

Force Exerted by Fluid Jet in Y: 57 Newton --> 57 Newton No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Cross Sectional Area of Jet: 1.2 Square Meter --> 1.2 Square Meter No Conversion Required
Theta: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Angle between Jet and Plate: 11 Degree --> 0.19198621771934 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

v_jet = sqrt((F_y*g)/(γ_f*A_Jet*((sin(θ))-sin(∠D)))) --> sqrt((57*9.8)/(9.81*1.2*((sin(0.5235987755982))-sin(0.19198621771934))))

Evaluating ... ...

v_jet = 12.3883057026386

STEP 3: Convert Result to Output's Unit

12.3883057026386 Meter per Second --> No Conversion Required

FINAL ANSWER

12.3883057026386 ≈ 12.38831 Meter per Second <-- Fluid Jet Velocity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Impact of Free Jets » Force Exerted by Fluid Jet on Stationary Curved Vane » Jet Striking an Unsymmetrical Stationary Curved Vane Tangentially at one of the Tips » Velocity given Force Exerted by Jet on Vane in Y Direction

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Jet Striking an Unsymmetrical Stationary Curved Vane Tangentially at one of the Tips Calculators

Velocity for force exerted by jet on vane in x direction

LaTeX Go Fluid Jet Velocity = sqrt(Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*(cos(Theta)+cos(Angle between Jet and Plate)))

Specific weight for force exerted by jet on vane in x direction

LaTeX Go Specific Weight of Liquid = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Cross Sectional Area of Jet*(Fluid Jet Velocity^2)*(cos(Theta)+cos(Angle between Jet and Plate)))

Force exerted by jet on vane in x direction

LaTeX Go Force Exerted by Fluid Jet in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Fluid Jet Velocity^2))/Acceleration due to Gravity)*(cos(Theta)+cos(Angle between Jet and Plate))

Area of Cross Section for Force Exerted by Jet on Vane in x Direction

LaTeX Go Cross Sectional Area of Jet = (Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Specific Weight of Liquid*Fluid Jet Velocity^2*(cos(Theta)+cos(Angle between Jet and Plate)))

Velocity given Force Exerted by Jet on Vane in Y Direction Formula

LaTeX Go

What is meant by Specific Weight?

Specific Weight is defined as the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity.

How to Calculate Velocity given Force Exerted by Jet on Vane in Y Direction?

Velocity given Force Exerted by Jet on Vane in Y Direction calculator uses Fluid Jet Velocity = sqrt((Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*((sin(Theta))-sin(Angle between Jet and Plate)))) to calculate the Fluid Jet Velocity, The Velocity given Force Exerted by Jet on Vane in Y Direction is defined as the rate of change of its position with respect to a frame of reference, and is a function of time. Fluid Jet Velocity is denoted by v_jet symbol.

How to calculate Velocity given Force Exerted by Jet on Vane in Y Direction using this online calculator? To use this online calculator for Velocity given Force Exerted by Jet on Vane in Y Direction, enter Force Exerted by Fluid Jet in Y (F_y), Acceleration due to Gravity (g), Specific Weight of Liquid (γ_f), Cross Sectional Area of Jet (A_Jet), Theta (θ) & Angle between Jet and Plate (∠D) and hit the calculate button. Here is how the Velocity given Force Exerted by Jet on Vane in Y Direction calculation can be explained with given input values -> 0.358868 = sqrt((57*9.8)/(9810*1.2*((sin(0.5235987755982))-sin(0.19198621771934)))).

FAQ

What is Velocity given Force Exerted by Jet on Vane in Y Direction?

The Velocity given Force Exerted by Jet on Vane in Y Direction is defined as the rate of change of its position with respect to a frame of reference, and is a function of time and is represented as v_jet = sqrt((F_y*g)/(γ_f*A_Jet*((sin(θ))-sin(∠D)))) or Fluid Jet Velocity = sqrt((Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*((sin(Theta))-sin(Angle between Jet and Plate)))). Force Exerted by Fluid Jet in Y is the impact of jet on plates or vanes, its momentum is changed and a hydrodynamic force is exerted and liquid comes out from nozzle with a high velocity, The Acceleration due to Gravity is acceleration gained by an object because of gravitational force, The Specific Weight of Liquid refers to the weight per unit volume of that substance, Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint & Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

How to calculate Velocity given Force Exerted by Jet on Vane in Y Direction?

The Velocity given Force Exerted by Jet on Vane in Y Direction is defined as the rate of change of its position with respect to a frame of reference, and is a function of time is calculated using Fluid Jet Velocity = sqrt((Force Exerted by Fluid Jet in Y*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*((sin(Theta))-sin(Angle between Jet and Plate)))). To calculate Velocity given Force Exerted by Jet on Vane in Y Direction, you need Force Exerted by Fluid Jet in Y (F_y), Acceleration due to Gravity (g), Specific Weight of Liquid (γ_f), Cross Sectional Area of Jet (A_Jet), Theta (θ) & Angle between Jet and Plate (∠D). With our tool, you need to enter the respective value for Force Exerted by Fluid Jet in Y, Acceleration due to Gravity, Specific Weight of Liquid, Cross Sectional Area of Jet, Theta & Angle between Jet and Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Fluid Jet Velocity?

In this formula, Fluid Jet Velocity uses Force Exerted by Fluid Jet in Y, Acceleration due to Gravity, Specific Weight of Liquid, Cross Sectional Area of Jet, Theta & Angle between Jet and Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Fluid Jet Velocity = sqrt(Force Exerted by Fluid Jet in X*Acceleration due to Gravity)/(Specific Weight of Liquid*Cross Sectional Area of Jet*(cos(Theta)+cos(Angle between Jet and Plate)))

Home

FREE PDFs

🔍 Search