Vehicle Weight with All Wheel Brake on Front Wheel Solution

STEP 0: Pre-Calculation Summary
Formula Used
Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase))
W = RF/((x+μ*h)*cos(θ)/(b))
This formula uses 1 Functions, 7 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Vehicle Weight - (Measured in Newton) - Vehicle Weight is the heaviness of the vehicle, generally expressed in Newtons.
Normal Reaction at the Front Wheel - (Measured in Newton) - Normal Reaction at the Front Wheel is the reaction force offered by the ground surface onto the front wheels.
Horizontal Distance of C.G. from Rear Axle - (Measured in Meter) - Horizontal Distance of C.G. from Rear Axle is the distance of vehicle's center of gravity (C.G.) form rear axle measured along wheelbase of vehicle.
Friction Coefficient Between Wheels and Ground - Friction Coefficient between Wheels and Ground is the friction coefficient which is generated between wheels and ground when the brakes are applied.
Height of Center of Gravity (C.G.) of Vehicle - (Measured in Meter) - Height of Center of Gravity (C.G.) of Vehicle is the theoretical point where the sum of all of the masses of each of its individual components effectively act.
Inclination Angle of Road - (Measured in Radian) - Inclination Angle of Road is the angle which the road surface is making with the horizontal.
Vehicle Wheelbase - (Measured in Meter) - Vehicle Wheelbase is the center distance between the front and the rear axle of the vehicle.
STEP 1: Convert Input(s) to Base Unit
Normal Reaction at the Front Wheel: 4625.314 Newton --> 4625.314 Newton No Conversion Required
Horizontal Distance of C.G. from Rear Axle: 1.15 Meter --> 1.15 Meter No Conversion Required
Friction Coefficient Between Wheels and Ground: 0.49 --> No Conversion Required
Height of Center of Gravity (C.G.) of Vehicle: 0.065 Meter --> 0.065 Meter No Conversion Required
Inclination Angle of Road: 5 Degree --> 0.0872664625997001 Radian (Check conversion ​here)
Vehicle Wheelbase: 2.8 Meter --> 2.8 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
W = RF/((x+μ*h)*cos(θ)/(b)) --> 4625.314/((1.15+0.49*0.065)*cos(0.0872664625997001)/(2.8))
Evaluating ... ...
W = 10999.9995385095
STEP 3: Convert Result to Output's Unit
10999.9995385095 Newton --> No Conversion Required
FINAL ANSWER
10999.9995385095 11000 Newton <-- Vehicle Weight
(Calculation completed in 00.020 seconds)

Credits

Creator Image
National Institute of Technology Calicut (NIT Calicut), Calicut, Kerala
Peri Krishna Karthik has created this Calculator and 200+ more calculators!
Verifier Image
Verified by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has verified this Calculator and 100+ more calculators!

Effects on Front Wheel Calculators

Height of C.G. from Road Surface with Front Wheel Brake
​ LaTeX ​ Go Height of Center of Gravity (C.G.) of Vehicle = ((Normal Reaction at the Front Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road))-Horizontal Distance of C.G. from Rear Axle)/Friction Coefficient Between Wheels and Ground
Vehicle Weight with All Wheel Brake on Front Wheel
​ LaTeX ​ Go Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase))
Horizontal Distance of C.G from Rear Axle with Front Wheel Brake
​ LaTeX ​ Go Horizontal Distance of C.G. from Rear Axle = (Normal Reaction at the Front Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road))-Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle
Front Wheel Reaction with All Wheel Braking
​ LaTeX ​ Go Normal Reaction at the Front Wheel = Vehicle Weight*(Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase)

Vehicle Weight with All Wheel Brake on Front Wheel Formula

​LaTeX ​Go
Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase))
W = RF/((x+μ*h)*cos(θ)/(b))

How weight transfer occurs during braking?

The inertial force acts at the centre of gravity of the vehicle, while the retarding force due to the application of brakes acts at the road surface. These two forms an overturning couple. This overturning couple increases the perpendicular force between the front wheels and ground by an amount, while the perpendicular force between rear wheels and ground is decreased by an equal amount. Some of the vehicle weight is thus transferred from the rear to the front axle.

How does the braking distribution occurs among front and rear brakes?

It is observed that in vehicles either the distribution of weight over the two axles is equal, or the front axle carries more weight, the braking effect has to be more at the front wheels for efficient braking. It is seen that in general for achieving maximum efficiency, about 75% of the total braking effect should be on front wheels. However, in such case the trouble would arise while travelling over wet road. where hight braking effect at the front would cause skidding of front wheels, because of decrease of weight transfer. In practice, about 60% of the braking effort is applied on the front wheels.

How to Calculate Vehicle Weight with All Wheel Brake on Front Wheel?

Vehicle Weight with All Wheel Brake on Front Wheel calculator uses Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase)) to calculate the Vehicle Weight, Vehicle Weight with All Wheel Brake on Front Wheel formula is used to find the heaviness of the vehicle. Vehicle Weight is denoted by W symbol.

How to calculate Vehicle Weight with All Wheel Brake on Front Wheel using this online calculator? To use this online calculator for Vehicle Weight with All Wheel Brake on Front Wheel, enter Normal Reaction at the Front Wheel (RF), Horizontal Distance of C.G. from Rear Axle (x), Friction Coefficient Between Wheels and Ground (μ), Height of Center of Gravity (C.G.) of Vehicle (h), Inclination Angle of Road (θ) & Vehicle Wheelbase (b) and hit the calculate button. Here is how the Vehicle Weight with All Wheel Brake on Front Wheel calculation can be explained with given input values -> 11000 = 4625.314/((1.15+0.49*0.065)*cos(0.0872664625997001)/(2.8)).

FAQ

What is Vehicle Weight with All Wheel Brake on Front Wheel?
Vehicle Weight with All Wheel Brake on Front Wheel formula is used to find the heaviness of the vehicle and is represented as W = RF/((x+μ*h)*cos(θ)/(b)) or Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase)). Normal Reaction at the Front Wheel is the reaction force offered by the ground surface onto the front wheels, Horizontal Distance of C.G. from Rear Axle is the distance of vehicle's center of gravity (C.G.) form rear axle measured along wheelbase of vehicle, Friction Coefficient between Wheels and Ground is the friction coefficient which is generated between wheels and ground when the brakes are applied, Height of Center of Gravity (C.G.) of Vehicle is the theoretical point where the sum of all of the masses of each of its individual components effectively act, Inclination Angle of Road is the angle which the road surface is making with the horizontal & Vehicle Wheelbase is the center distance between the front and the rear axle of the vehicle.
How to calculate Vehicle Weight with All Wheel Brake on Front Wheel?
Vehicle Weight with All Wheel Brake on Front Wheel formula is used to find the heaviness of the vehicle is calculated using Vehicle Weight = Normal Reaction at the Front Wheel/((Horizontal Distance of C.G. from Rear Axle+Friction Coefficient Between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase)). To calculate Vehicle Weight with All Wheel Brake on Front Wheel, you need Normal Reaction at the Front Wheel (RF), Horizontal Distance of C.G. from Rear Axle (x), Friction Coefficient Between Wheels and Ground (μ), Height of Center of Gravity (C.G.) of Vehicle (h), Inclination Angle of Road (θ) & Vehicle Wheelbase (b). With our tool, you need to enter the respective value for Normal Reaction at the Front Wheel, Horizontal Distance of C.G. from Rear Axle, Friction Coefficient Between Wheels and Ground, Height of Center of Gravity (C.G.) of Vehicle, Inclination Angle of Road & Vehicle Wheelbase and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!