Variable Time when Haul and Return Distance is in Feet Calculator

✖Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.ⓘ Haul Distance in Feet [H_ft]			+10% -10%
✖Return Distance in Foot in Scraper Production is the journey back from a destination.ⓘ Return Distance in Foot in Scraper Production [R_ft]			+10% -10%
✖Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .ⓘ Speed in Miles per Hour in Scraper Production [S_mph]			+10% -10%

✖Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.ⓘ Variable Time when Haul and Return Distance is in Feet [T_v]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Variable Time when Haul and Return Distance is in Feet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production)
T_v = (H_ft+R_ft)/(88*S_mph)
This formula uses 4 Variables

Variables Used

Variable Time in Scraper Production - (Measured in Second) - Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.
Haul Distance in Feet - (Measured in Meter) - Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.
Return Distance in Foot in Scraper Production - (Measured in Meter) - Return Distance in Foot in Scraper Production is the journey back from a destination.
Speed in Miles per Hour in Scraper Production - (Measured in Meter per Second) - Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .

STEP 1: Convert Input(s) to Base Unit

Haul Distance in Feet: 66.92 Foot --> 20.3972160000816 Meter (Check conversion here)
Return Distance in Foot in Scraper Production: 3.3 Foot --> 1.00584000000402 Meter (Check conversion here)
Speed in Miles per Hour in Scraper Production: 0.045 Mile per Hour --> 0.0201168 Meter per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_v = (H_ft+R_ft)/(88*S_mph) --> (20.3972160000816+1.00584000000402)/(88*0.0201168)

Evaluating ... ...

T_v = 12.0902203857233

STEP 3: Convert Result to Output's Unit

12.0902203857233 Second -->0.201503673095388 Minute (Check conversion here)

FINAL ANSWER

0.201503673095388 ≈ 0.201504 Minute <-- Variable Time in Scraper Production

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Variable Time when Haul and Return Distance is in Feet

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Variable Time when Haul and Return Distance is in Feet Formula

LaTeX Go

Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production)
T_v = (H_ft+R_ft)/(88*S_mph)

What is Haul Distance?

The distance measured along the center line or most direct practical route between the center of the mass of excavation and the center of mass of the fill as finally placed. It is the distance material is moved.

How to Calculate Variable Time when Haul and Return Distance is in Feet?

Variable Time when Haul and Return Distance is in Feet calculator uses Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production) to calculate the Variable Time in Scraper Production, The Variable Time When Haul and Return Distance is in Feet is defined as the value of variable time when haul and return speed is known. Variable Time in Scraper Production is denoted by T_v symbol.

How to calculate Variable Time when Haul and Return Distance is in Feet using this online calculator? To use this online calculator for Variable Time when Haul and Return Distance is in Feet, enter Haul Distance in Feet (H_ft), Return Distance in Foot in Scraper Production (R_ft) & Speed in Miles per Hour in Scraper Production (S_mph) and hit the calculate button. Here is how the Variable Time when Haul and Return Distance is in Feet calculation can be explained with given input values -> 0.003358 = (20.3972160000816+1.00584000000402)/(88*0.0201168).

FAQ

What is Variable Time when Haul and Return Distance is in Feet?

The Variable Time When Haul and Return Distance is in Feet is defined as the value of variable time when haul and return speed is known and is represented as T_v = (H_ft+R_ft)/(88*S_mph) or Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production). Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation, Return Distance in Foot in Scraper Production is the journey back from a destination & Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .

How to calculate Variable Time when Haul and Return Distance is in Feet?

The Variable Time When Haul and Return Distance is in Feet is defined as the value of variable time when haul and return speed is known is calculated using Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production). To calculate Variable Time when Haul and Return Distance is in Feet, you need Haul Distance in Feet (H_ft), Return Distance in Foot in Scraper Production (R_ft) & Speed in Miles per Hour in Scraper Production (S_mph). With our tool, you need to enter the respective value for Haul Distance in Feet, Return Distance in Foot in Scraper Production & Speed in Miles per Hour in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search