Upper Sideband Power Solution

STEP 0: Pre-Calculation Summary
Formula Used
Upper Sideband Power = (Amplitude of Carrier Signal^2*Modulation Index^2)/(8*Resistance)
Pusb = (Ac^2*μ^2)/(8*R)
This formula uses 4 Variables
Variables Used
Upper Sideband Power - (Measured in Watt) - Upper Sideband Power is a type of radio communication in which the carrier frequency is placed above audio frequency, allowing for higher data transmission rates.
Amplitude of Carrier Signal - (Measured in Volt) - Amplitude of Carrier Signal is varied in accordance with the instantaneous amplitude of the modulating signal. The modulating signal is the signal that contains the information to be transmitted.
Modulation Index - Modulation Index states the level of modulation that a carrier wave undergoes.
Resistance - (Measured in Ohm) - Resistance refers to the opposition to the flow of an alternating current (AC) in a circuit.
STEP 1: Convert Input(s) to Base Unit
Amplitude of Carrier Signal: 17 Volt --> 17 Volt No Conversion Required
Modulation Index: 0.36 --> No Conversion Required
Resistance: 125.25 Ohm --> 125.25 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Pusb = (Ac^2*μ^2)/(8*R) --> (17^2*0.36^2)/(8*125.25)
Evaluating ... ...
Pusb = 0.0373796407185629
STEP 3: Convert Result to Output's Unit
0.0373796407185629 Watt --> No Conversion Required
FINAL ANSWER
0.0373796407185629 0.03738 Watt <-- Upper Sideband Power
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

Sideband and Frequency Modulation Calculators

Pre Detection Signal to Noise Ratio
​ LaTeX ​ Go Pre Detection SNR of DSB-SC = (Amplitude of Carrier Signal DSB-SC^2*Total Power DSB-SC)/(2*Noise Density DSB-SC*Transmission Bandwidth DSBSC)
Transmitted Power of DSB-SC
​ LaTeX ​ Go Transmitted Power of DSB-SC = Upper Sideband Power in DSB-SC+Lower Sideband Power DSB-SC
Bandwidth of VSB
​ LaTeX ​ Go Bandwidth of VSB = Maximum Frequency DSB-SC+Vestige Frequency
Bandwidth in DSB-SC
​ LaTeX ​ Go Bandwidth in DSB-SC = 2*Maximum Frequency DSB-SC

Upper Sideband Power Formula

​LaTeX ​Go
Upper Sideband Power = (Amplitude of Carrier Signal^2*Modulation Index^2)/(8*Resistance)
Pusb = (Ac^2*μ^2)/(8*R)

What is Upper sideband?

In radio communications, a sideband is a band of frequencies higher than or lower than the carrier frequency, that are the result of the modulation process. The sidebands carry the information transmitted by the radio signal. The sidebands comprise all the spectral components of the modulated signal except the carrier. The signal components above the carrier frequency constitute the upper sideband (USB). All forms of modulation produce sidebands.

How to Calculate Upper Sideband Power?

Upper Sideband Power calculator uses Upper Sideband Power = (Amplitude of Carrier Signal^2*Modulation Index^2)/(8*Resistance) to calculate the Upper Sideband Power, Upper Sideband Power is the power of the band of frequencies that is located above the carrier frequency in an amplitude modulated (AM) signal. Upper Sideband Power is denoted by Pusb symbol.

How to calculate Upper Sideband Power using this online calculator? To use this online calculator for Upper Sideband Power, enter Amplitude of Carrier Signal (Ac), Modulation Index (μ) & Resistance (R) and hit the calculate button. Here is how the Upper Sideband Power calculation can be explained with given input values -> 0.037454 = (17^2*0.36^2)/(8*125.25).

FAQ

What is Upper Sideband Power?
Upper Sideband Power is the power of the band of frequencies that is located above the carrier frequency in an amplitude modulated (AM) signal and is represented as Pusb = (Ac^2*μ^2)/(8*R) or Upper Sideband Power = (Amplitude of Carrier Signal^2*Modulation Index^2)/(8*Resistance). Amplitude of Carrier Signal is varied in accordance with the instantaneous amplitude of the modulating signal. The modulating signal is the signal that contains the information to be transmitted, Modulation Index states the level of modulation that a carrier wave undergoes & Resistance refers to the opposition to the flow of an alternating current (AC) in a circuit.
How to calculate Upper Sideband Power?
Upper Sideband Power is the power of the band of frequencies that is located above the carrier frequency in an amplitude modulated (AM) signal is calculated using Upper Sideband Power = (Amplitude of Carrier Signal^2*Modulation Index^2)/(8*Resistance). To calculate Upper Sideband Power, you need Amplitude of Carrier Signal (Ac), Modulation Index (μ) & Resistance (R). With our tool, you need to enter the respective value for Amplitude of Carrier Signal, Modulation Index & Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Upper Sideband Power?
In this formula, Upper Sideband Power uses Amplitude of Carrier Signal, Modulation Index & Resistance. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Upper Sideband Power = Carrier Power*(Modulation Index^2)/4
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!