Unit Weight of Soil given Round Footing and Bearing Capacity Calculator

✖Bearing Capacity is the pressure exerted on the soil by a foundation or structural load, taking into account the soil's bearing capacity factors.ⓘ Bearing Capacity [q_s]			+10% -10%
✖Cohesion of Soil given Round Footing is a measure of the intermolecular forces within the soil that enable it to resist being pulled apart.ⓘ Cohesion of Soil given Round Footing [C_r]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Effective Surcharge given Round Footing is the additional pressure exerted on the soil due to external loads, such as structures or other surface loads, which are distributed over a round footing.ⓘ Effective Surcharge given Round Footing [σ_round]			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%
✖Width of Footing for Round Footing is the shorter dimension of the round footing.ⓘ Width of Footing for Round Footing [B_round]			+10% -10%

✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil given Round Footing and Bearing Capacity [γ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bearing Capacity of Soil by Terzaghi's Analysis Formulas PDF PDF Image

Unit Weight of Soil given Round Footing and Bearing Capacity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Unit Weight of Soil = (Bearing Capacity-((1.3*Cohesion of Soil given Round Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Round Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Round Footing*0.6)
γ = (q_s-((1.3*C_r*N_c)+(σ_round*N_q)))/(0.5*N_γ*B_round*0.6)
This formula uses 8 Variables

Variables Used

Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Bearing Capacity - (Measured in Pascal) - Bearing Capacity is the pressure exerted on the soil by a foundation or structural load, taking into account the soil's bearing capacity factors.
Cohesion of Soil given Round Footing - (Measured in Pascal) - Cohesion of Soil given Round Footing is a measure of the intermolecular forces within the soil that enable it to resist being pulled apart.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Effective Surcharge given Round Footing - (Measured in Pascal) - Effective Surcharge given Round Footing is the additional pressure exerted on the soil due to external loads, such as structures or other surface loads, which are distributed over a round footing.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
Width of Footing for Round Footing - (Measured in Meter) - Width of Footing for Round Footing is the shorter dimension of the round footing.

STEP 1: Convert Input(s) to Base Unit

Bearing Capacity: 110.819 Kilopascal --> 110819 Pascal (Check conversion here)
Cohesion of Soil given Round Footing: 17.01 Kilopascal --> 17010 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 1.93 --> No Conversion Required
Effective Surcharge given Round Footing: 15.97 Kilonewton per Square Meter --> 15970 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
Width of Footing for Round Footing: 5.7 Meter --> 5.7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ = (q_s-((1.3*C_r*N_c)+(σ_round*N_q)))/(0.5*N_γ*B_round*0.6) --> (110819-((1.3*17010*1.93)+(15970*2.01)))/(0.5*1.6*5.7*0.6)

Evaluating ... ...

γ = 13172.956871345

STEP 3: Convert Result to Output's Unit

13172.956871345 Newton per Cubic Meter -->13.172956871345 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

13.172956871345 ≈ 13.17296 Kilonewton per Cubic Meter <-- Unit Weight of Soil

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Bearing Capacity of Soil by Terzaghi's Analysis » Specialization of Terzaghi's Equations » Unit Weight of Soil given Round Footing and Bearing Capacity

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specialization of Terzaghi's Equations Calculators

Bearing Capacity Factor Dependent on Cohesion

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Cohesion)

Cohesion of Soil depending on Shape Factors

LaTeX Go Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Bearing Capacity Factor dependent on Cohesion)

Shape Factor Dependent on Cohesion

LaTeX Go Shape Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Bearing Capacity Factor dependent on Cohesion*Cohesion)

Bearing Capacity depending on Shape Factors

LaTeX Go Bearing Capacity = (Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge (KN/m2)*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)

Unit Weight of Soil given Round Footing and Bearing Capacity Formula

LaTeX Go

What is Footing?

Footings are an important part of foundation construction. They are typically made of concrete with rebar reinforcement that has been poured into an excavated trench. The purpose of footings is to support the foundation and prevent settling. Footings are especially important in areas with troublesome soils.

How to Calculate Unit Weight of Soil given Round Footing and Bearing Capacity?

Unit Weight of Soil given Round Footing and Bearing Capacity calculator uses Unit Weight of Soil = (Bearing Capacity-((1.3*Cohesion of Soil given Round Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Round Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Round Footing*0.6) to calculate the Unit Weight of Soil, The Unit Weight of Soil given Round Footing and Bearing Capacity formula is defined as the value of the density of the soil surrounding a round footing (such as a foundation or pile cap) and its influence on the bearing capacity of the footing. Unit Weight of Soil is denoted by γ symbol.

How to calculate Unit Weight of Soil given Round Footing and Bearing Capacity using this online calculator? To use this online calculator for Unit Weight of Soil given Round Footing and Bearing Capacity, enter Bearing Capacity (q_s), Cohesion of Soil given Round Footing (C_r), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge given Round Footing (σ_round), Bearing Capacity Factor dependent on Surcharge (N_q), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Width of Footing for Round Footing (B_round) and hit the calculate button. Here is how the Unit Weight of Soil given Round Footing and Bearing Capacity calculation can be explained with given input values -> 0.013173 = (110819-((1.3*17010*1.93)+(15970*2.01)))/(0.5*1.6*5.7*0.6).

FAQ

What is Unit Weight of Soil given Round Footing and Bearing Capacity?

The Unit Weight of Soil given Round Footing and Bearing Capacity formula is defined as the value of the density of the soil surrounding a round footing (such as a foundation or pile cap) and its influence on the bearing capacity of the footing and is represented as γ = (q_s-((1.3*C_r*N_c)+(σ_round*N_q)))/(0.5*N_γ*B_round*0.6) or Unit Weight of Soil = (Bearing Capacity-((1.3*Cohesion of Soil given Round Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Round Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Round Footing*0.6). Bearing Capacity is the pressure exerted on the soil by a foundation or structural load, taking into account the soil's bearing capacity factors, Cohesion of Soil given Round Footing is a measure of the intermolecular forces within the soil that enable it to resist being pulled apart, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Effective Surcharge given Round Footing is the additional pressure exerted on the soil due to external loads, such as structures or other surface loads, which are distributed over a round footing, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil & Width of Footing for Round Footing is the shorter dimension of the round footing.

How to calculate Unit Weight of Soil given Round Footing and Bearing Capacity?

The Unit Weight of Soil given Round Footing and Bearing Capacity formula is defined as the value of the density of the soil surrounding a round footing (such as a foundation or pile cap) and its influence on the bearing capacity of the footing is calculated using Unit Weight of Soil = (Bearing Capacity-((1.3*Cohesion of Soil given Round Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Round Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Round Footing*0.6). To calculate Unit Weight of Soil given Round Footing and Bearing Capacity, you need Bearing Capacity (q_s), Cohesion of Soil given Round Footing (C_r), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge given Round Footing (σ_round), Bearing Capacity Factor dependent on Surcharge (N_q), Bearing Capacity Factor dependent on Unit Weight (N_γ) & Width of Footing for Round Footing (B_round). With our tool, you need to enter the respective value for Bearing Capacity, Cohesion of Soil given Round Footing, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge given Round Footing, Bearing Capacity Factor dependent on Surcharge, Bearing Capacity Factor dependent on Unit Weight & Width of Footing for Round Footing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Unit Weight of Soil?

In this formula, Unit Weight of Soil uses Bearing Capacity, Cohesion of Soil given Round Footing, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge given Round Footing, Bearing Capacity Factor dependent on Surcharge, Bearing Capacity Factor dependent on Unit Weight & Width of Footing for Round Footing. We can use 3 other way(s) to calculate the same, which is/are as follows -

Unit Weight of Soil = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing*Shape Factor Dependent on Unit Weight)
Unit Weight of Soil = (Bearing Capacity-((1*Cohesion of Soil given Strip Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Strip Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Strip Footing*1)
Unit Weight of Soil = (Bearing Capacity-((1.3*Cohesion of Soil given Square Footing*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge given Square Footing*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Bearing Capacity Factor dependent on Unit Weight*Width of Footing for Square Footing*0.8)

Home

FREE PDFs

🔍 Search